From: Michael Buesch Date: Sat, 22 Dec 2007 20:56:30 +0000 (+0100) Subject: b43: Fix chip access validation for new devices X-Git-Tag: v2.6.25-rc1~1162^2~179 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f3dd3fcc2c79b950801641075b33b86acc372d9b;p=linux-2.6-omap-h63xx.git b43: Fix chip access validation for new devices This fixes chip access validation for newer devices (4318 and up, I think) This patch fixes probing of a PCMCIA based 4318 device. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 813b2409f0c..bcaa6092438 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -50,6 +50,9 @@ #define B43_MMIO_XMITSTAT_1 0x174 #define B43_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ #define B43_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ +#define B43_MMIO_TSF_CFP_REP 0x188 +#define B43_MMIO_TSF_CFP_START 0x18C +#define B43_MMIO_TSF_CFP_MAXDUR 0x190 /* 32-bit DMA */ #define B43_MMIO_DMA32_BASE0 0x200 @@ -88,6 +91,8 @@ #define B43_MMIO_RADIO_HWENABLED_LO 0x49A #define B43_MMIO_GPIO_CONTROL 0x49C #define B43_MMIO_GPIO_MASK 0x49E +#define B43_MMIO_TSF_CFP_START_LOW 0x604 +#define B43_MMIO_TSF_CFP_START_HIGH 0x606 #define B43_MMIO_TSF_0 0x632 /* core rev < 3 only */ #define B43_MMIO_TSF_1 0x634 /* core rev < 3 only */ #define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index f4c14272332..6b3013c2d96 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2408,32 +2408,42 @@ static void b43_periodic_tasks_setup(struct b43_wldev *dev) queue_delayed_work(dev->wl->hw->workqueue, work, 0); } -/* Validate access to the chip (SHM) */ +/* Check if communication with the device works correctly. */ static int b43_validate_chipaccess(struct b43_wldev *dev) { - u32 value; - u32 shm_backup; + u32 v, backup; - shm_backup = b43_shm_read32(dev, B43_SHM_SHARED, 0); - b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA); - if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA) - goto error; + backup = b43_shm_read32(dev, B43_SHM_SHARED, 0); + + /* Check for read/write and endianness problems. */ b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55); if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55) goto error; - b43_shm_write32(dev, B43_SHM_SHARED, 0, shm_backup); - - value = b43_read32(dev, B43_MMIO_MACCTL); - if ((value | B43_MACCTL_GMODE) != - (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED)) + b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA); + if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA) goto error; - value = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); - if (value) + b43_shm_write32(dev, B43_SHM_SHARED, 0, backup); + + if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) { + /* The 32bit register shadows the two 16bit registers + * with update sideeffects. Validate this. */ + b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA); + b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB); + if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB) + goto error; + if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC) + goto error; + } + b43_write32(dev, B43_MMIO_TSF_CFP_START, 0); + + v = b43_read32(dev, B43_MMIO_MACCTL); + v |= B43_MACCTL_GMODE; + if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED)) goto error; return 0; - error: +error: b43err(dev->wl, "Failed to validate the chipaccess\n"); return -ENODEV; }