From: Paul Walmsley Date: Thu, 26 Jun 2008 00:09:39 +0000 (-0600) Subject: OMAP3: move USBHOST SAR handling from clock framework to powerdomain layer X-Git-Tag: v2.6.26-omap1~99 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f3ceac86a9d425d101d606d87a5af44afef27179;p=linux-2.6-omap-h63xx.git OMAP3: move USBHOST SAR handling from clock framework to powerdomain layer Remove usbhost_sar_fclk from the OMAP3 clock framework. The bit that the clock was tweaking doesn't actually enable or disable a clock; it controls whether the hardware will save and restore USBHOST state when the powerdomain changes state. (That happens to coincidentally enable a clock for the duration of the operation, hence the earlier confusion.) In place of the clock, mark the USBHOST powerdomain as supporting hardware save-and-restore functionality. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 4a8729ae38f..92fa68c1df4 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2231,17 +2231,6 @@ static struct clk usbhost_ick = { .recalc = &followparent_recalc, }; -static struct clk usbhost_sar_fck = { - .name = "usbhost_sar_fck", - .parent = &osc_sys_ck, - .init = &omap2_init_clk_clkdm, - .enable_reg = OMAP34XX_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), - .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - /* WKUP */ static const struct clksel_rate usim_96m_rates[] = { @@ -3189,7 +3178,6 @@ static struct clk *onchip_34xx_clks[] __initdata = { &usbhost_120m_fck, &usbhost_48m_fck, &usbhost_ick, - &usbhost_sar_fck, &usim_fck, &gpt1_fck, &wkup_32k_fck, diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index 1e1146a5be0..88f85eaa3b7 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -312,6 +312,7 @@ static struct powerdomain usbhost_pwrdm = { .sleepdep_srcs = dss_per_usbhost_sleepdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, + .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */ .banks = 1, .pwrsts_mem_ret = { [0] = PWRDM_POWER_RET, /* MEMRETSTATE */