From: Wu Fengguang Date: Thu, 2 Apr 2009 11:44:18 +0000 (+0800) Subject: ALSA: hda - enable SPDIF output for Intel DX58SO board X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f3cd3f5d341dc5218d0138a67945182e83174af9;p=linux-2.6-omap-h63xx.git ALSA: hda - enable SPDIF output for Intel DX58SO board ALC889 has two SPDIF outputs: 0x06, 0x10. Board vendors can use either or both. DX58SO uses 0x10, but the driver assumes 0x06. The safe solution is to add 0x10 as slave output to the existing 0x06. Reported-by: Jeroen Van Breedam Tested-by: Jeroen Van Breedam Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 82097790f6f..f35e58a2d92 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8764,6 +8764,10 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { {} }; +static hda_nid_t alc883_slave_dig_outs[] = { + ALC1200_DIGOUT_NID, 0, +}; + static hda_nid_t alc1200_slave_dig_outs[] = { ALC883_DIGOUT_NID, 0, }; @@ -8809,6 +8813,7 @@ static struct alc_config_preset alc883_presets[] = { .dac_nids = alc883_dac_nids, .dig_out_nid = ALC883_DIGOUT_NID, .dig_in_nid = ALC883_DIGIN_NID, + .slave_dig_outs = alc883_slave_dig_outs, .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_intel_modes), .channel_mode = alc883_3ST_6ch_intel_modes, .need_dac_fix = 1,