From: David Gibson Date: Wed, 13 Jun 2007 04:52:54 +0000 (+1000) Subject: [POWERPC] Remove the dregs of APUS support from arch/powerpc X-Git-Tag: v2.6.23-rc1~767^2^2~173 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f21f49ea639ac3f24824177dac1268af75a2d373;p=linux-2.6-omap-h63xx.git [POWERPC] Remove the dregs of APUS support from arch/powerpc APUS (the Amiga Power-Up System) is not supported under arch/powerpc and it's unlikely it ever will be. Therefore, this patch removes the fragments of APUS support code from arch/powerpc which have been copied from arch/ppc. A few APUS references are left in asm-powerpc in .h files which are still used from arch/ppc. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 12830a77d16..882f8a1d2c7 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -436,9 +436,9 @@ config PCI bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ || PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \ || MPC7448HPC2 || PPC_PS3 || PPC_HOLLY - default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \ + default y if !40x && !CPM2 && !8xx && !PPC_83xx \ && !PPC_85xx && !PPC_86xx - default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS + default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx select ARCH_SUPPORTS_MSI help diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index c897203198b..7d73a13450b 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -9,7 +9,6 @@ * rewritten by Paul Mackerras. * Copyright (C) 1996 Paul Mackerras. * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * This file contains the low-level support and setup for the * PowerPC platform, including trap and interrupt dispatch. @@ -32,10 +31,6 @@ #include #include -#ifdef CONFIG_APUS -#include -#endif - /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ /* see the comment for clear_bats() -- Cort */ \ @@ -92,11 +87,6 @@ _start: * r4: virtual address of boot_infos_t * r5: 0 * - * APUS - * r3: 'APUS' - * r4: physical address of memory base - * Linux/m68k style BootInfo structure at &_end. - * * PREP * This is jumped to on prep systems right after the kernel is relocated * to its proper place in memory by the boot loader. The expected layout @@ -150,14 +140,6 @@ __start: */ bl early_init -#ifdef CONFIG_APUS -/* On APUS the __va/__pa constants need to be set to the correct - * values before continuing. - */ - mr r4,r30 - bl fix_mem_constants -#endif /* CONFIG_APUS */ - /* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains * the physical address we are running at, returned by early_init() */ @@ -167,7 +149,7 @@ __after_mmu_off: bl flush_tlbs bl initial_bats -#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) +#if defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif @@ -183,7 +165,6 @@ __after_mmu_off: #endif /* CONFIG_6xx */ -#ifndef CONFIG_APUS /* * We need to run with _start at physical address 0. * On CHRP, we are loaded at 0x10000 since OF on CHRP uses @@ -196,7 +177,6 @@ __after_mmu_off: addis r4,r3,KERNELBASE@h /* current address of _start */ cmpwi 0,r4,0 /* are we already running at 0? */ bne relocate_kernel -#endif /* CONFIG_APUS */ /* * we now have the 1st 16M of ram mapped with the bats. * prep needs the mmu to be turned on here, but pmac already has it on. @@ -881,85 +861,6 @@ _GLOBAL(copy_and_flush) addi r6,r6,4 blr -#ifdef CONFIG_APUS -/* - * On APUS the physical base address of the kernel is not known at compile - * time, which means the __pa/__va constants used are incorrect. In the - * __init section is recorded the virtual addresses of instructions using - * these constants, so all that has to be done is fix these before - * continuing the kernel boot. - * - * r4 = The physical address of the kernel base. - */ -fix_mem_constants: - mr r10,r4 - addis r10,r10,-KERNELBASE@h /* virt_to_phys constant */ - neg r11,r10 /* phys_to_virt constant */ - - lis r12,__vtop_table_begin@h - ori r12,r12,__vtop_table_begin@l - add r12,r12,r10 /* table begin phys address */ - lis r13,__vtop_table_end@h - ori r13,r13,__vtop_table_end@l - add r13,r13,r10 /* table end phys address */ - subi r12,r12,4 - subi r13,r13,4 -1: lwzu r14,4(r12) /* virt address of instruction */ - add r14,r14,r10 /* phys address of instruction */ - lwz r15,0(r14) /* instruction, now insert top */ - rlwimi r15,r10,16,16,31 /* half of vp const in low half */ - stw r15,0(r14) /* of instruction and restore. */ - dcbst r0,r14 /* write it to memory */ - sync - icbi r0,r14 /* flush the icache line */ - cmpw r12,r13 - bne 1b - sync /* additional sync needed on g4 */ - isync - -/* - * Map the memory where the exception handlers will - * be copied to when hash constants have been patched. - */ -#ifdef CONFIG_APUS_FAST_EXCEPT - lis r8,0xfff0 -#else - lis r8,0 -#endif - ori r8,r8,0x2 /* 128KB, supervisor */ - mtspr SPRN_DBAT3U,r8 - mtspr SPRN_DBAT3L,r8 - - lis r12,__ptov_table_begin@h - ori r12,r12,__ptov_table_begin@l - add r12,r12,r10 /* table begin phys address */ - lis r13,__ptov_table_end@h - ori r13,r13,__ptov_table_end@l - add r13,r13,r10 /* table end phys address */ - subi r12,r12,4 - subi r13,r13,4 -1: lwzu r14,4(r12) /* virt address of instruction */ - add r14,r14,r10 /* phys address of instruction */ - lwz r15,0(r14) /* instruction, now insert top */ - rlwimi r15,r11,16,16,31 /* half of pv const in low half*/ - stw r15,0(r14) /* of instruction and restore. */ - dcbst r0,r14 /* write it to memory */ - sync - icbi r0,r14 /* flush the icache line */ - cmpw r12,r13 - bne 1b - - sync /* additional sync needed on g4 */ - isync /* No speculative loading until now */ - blr - -/*********************************************************************** - * Please note that on APUS the exception handlers are located at the - * physical address 0xfff0000. For this reason, the exception handlers - * cannot use relative branches to access the code below. - ***********************************************************************/ -#endif /* CONFIG_APUS */ - #ifdef CONFIG_SMP #ifdef CONFIG_GEMINI .globl __secondary_start_gemini @@ -1135,19 +1036,6 @@ start_here: bl __save_cpu_setup bl MMU_init -#ifdef CONFIG_APUS - /* Copy exception code to exception vector base on APUS. */ - lis r4,KERNELBASE@h -#ifdef CONFIG_APUS_FAST_EXCEPT - lis r3,0xfff0 /* Copy to 0xfff00000 */ -#else - lis r3,0 /* Copy to 0x00000000 */ -#endif - li r5,0x4000 /* # bytes of memory to copy */ - li r6,0 - bl copy_and_flush /* copy the first 0x4000 bytes */ -#endif /* CONFIG_APUS */ - /* * Go back to running unmapped so we can load up new values * for SDR1 (hash table pointer) and the segment registers @@ -1324,11 +1212,7 @@ initial_bats: #else ori r8,r8,2 /* R/W access */ #endif /* CONFIG_SMP */ -#ifdef CONFIG_APUS - ori r11,r11,BL_8M<<2|0x2 /* set up 8MB BAT registers for 604 */ -#else ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ -#endif /* CONFIG_APUS */ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ @@ -1338,7 +1222,7 @@ initial_bats: blr -#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) +#ifdef CONFIG_BOOTX_TEXT setup_disp_bat: /* * setup the display bat prepared for us in prom.c @@ -1362,7 +1246,7 @@ setup_disp_bat: 1: mtspr SPRN_IBAT3L,r8 mtspr SPRN_IBAT3U,r11 blr -#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ +#endif /* CONFIG_BOOTX_TEXT */ #ifdef CONFIG_8260 /* Jump into the system reset for the rom. diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 42c8ed6ed52..b74b0fd764b 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -7,7 +7,6 @@ * Copyright (C) 1996-2001 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index ca4dcb07a93..c3df5047653 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -12,7 +12,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/4xx_mmu.c b/arch/powerpc/mm/4xx_mmu.c index 838e09db71d..7ff2609b64d 100644 --- a/arch/powerpc/mm/4xx_mmu.c +++ b/arch/powerpc/mm/4xx_mmu.c @@ -9,7 +9,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 123da03ab11..afab247d472 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -14,7 +14,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 5fce6ccecb8..e1f5ded851f 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -5,7 +5,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com) * * Derived from "arch/i386/mm/init.c" diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 7312a265545..1d6edf724c8 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -5,7 +5,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 0266a94d83b..2c8790f36be 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -5,7 +5,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com) * * Derived from "arch/i386/mm/init.c" diff --git a/arch/powerpc/mm/mmu_context_32.c b/arch/powerpc/mm/mmu_context_32.c index 792086b0100..cc32ba41d90 100644 --- a/arch/powerpc/mm/mmu_context_32.c +++ b/arch/powerpc/mm/mmu_context_32.c @@ -11,7 +11,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index f7a4066a57e..69cd1c617cd 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -8,7 +8,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 62680b0f720..1c85c6f3bbb 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -8,7 +8,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index a895de73bea..3dfd10db931 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -7,7 +7,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@samba.org) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index ec1421a20aa..142849de50e 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -11,7 +11,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/tlb_32.c b/arch/powerpc/mm/tlb_32.c index 6a69417cbc0..06c7e77e097 100644 --- a/arch/powerpc/mm/tlb_32.c +++ b/arch/powerpc/mm/tlb_32.c @@ -11,7 +11,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index fdecb7f764d..cbd34fc813e 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -8,7 +8,6 @@ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 361acfa2894..d6c475ca311 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -16,13 +16,6 @@ config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" depends on PPC32 && (BROKEN||BROKEN_ON_SMP) -config APUS - bool "Amiga-APUS" - depends on PPC32 && BROKEN - help - Select APUS if configuring for a PowerUP Amiga. - More information is available at: - . endchoice source "arch/powerpc/platforms/pseries/Kconfig" diff --git a/arch/powerpc/platforms/apus/Kconfig b/arch/powerpc/platforms/apus/Kconfig deleted file mode 100644 index 6bde3bffed8..00000000000 --- a/arch/powerpc/platforms/apus/Kconfig +++ /dev/null @@ -1,130 +0,0 @@ - -config AMIGA - bool - depends on APUS - default y - help - This option enables support for the Amiga series of computers. - -config ZORRO - bool - depends on APUS - default y - help - This enables support for the Zorro bus in the Amiga. If you have - expansion cards in your Amiga that conform to the Amiga - AutoConfig(tm) specification, say Y, otherwise N. Note that even - expansion cards that do not fit in the Zorro slots but fit in e.g. - the CPU slot may fall in this category, so you have to say Y to let - Linux use these. - -config ABSTRACT_CONSOLE - bool - depends on APUS - default y - -config APUS_FAST_EXCEPT - bool - depends on APUS - default y - -config AMIGA_PCMCIA - bool "Amiga 1200/600 PCMCIA support" - depends on APUS && EXPERIMENTAL - help - Include support in the kernel for pcmcia on Amiga 1200 and Amiga - 600. If you intend to use pcmcia cards say Y; otherwise say N. - -config AMIGA_BUILTIN_SERIAL - tristate "Amiga builtin serial support" - depends on APUS - help - If you want to use your Amiga's built-in serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config GVPIOEXT - tristate "GVP IO-Extender support" - depends on APUS - help - If you want to use a GVP IO-Extender serial card in Linux, say Y. - Otherwise, say N. - -config GVPIOEXT_LP - tristate "GVP IO-Extender parallel printer support" - depends on GVPIOEXT - help - Say Y to enable driving a printer from the parallel port on your - GVP IO-Extender card, N otherwise. - -config GVPIOEXT_PLIP - tristate "GVP IO-Extender PLIP support" - depends on GVPIOEXT - help - Say Y to enable doing IP over the parallel port on your GVP - IO-Extender card, N otherwise. - -config MULTIFACE_III_TTY - tristate "Multiface Card III serial support" - depends on APUS - help - If you want to use a Multiface III card's serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config A2232 - tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && APUS - ---help--- - This option supports the 2232 7-port serial card shipped with the - Amiga 2000 and other Zorro-bus machines, dating from 1989. At - a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip - each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The - ports were connected with 8 pin DIN connectors on the card bracket, - for which 8 pin to DB25 adapters were supplied. The card also had - jumpers internally to toggle various pinning configurations. - - This driver can be built as a module; but then "generic_serial" - will also be built as a module. This has to be loaded before - "ser_a2232". If you want to do this, answer M here. - -config WHIPPET_SERIAL - tristate "Hisoft Whippet PCMCIA serial support" - depends on AMIGA_PCMCIA - help - HiSoft has a web page at , but there - is no listing for the Whippet in their Amiga section. - -config APNE - tristate "PCMCIA NE2000 support" - depends on AMIGA_PCMCIA - help - If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, - say N. - - To compile this driver as a module, choose M here: the - module will be called apne. - -config SERIAL_CONSOLE - bool "Support for serial port console" - depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y) - -config HEARTBEAT - bool "Use power LED as a heartbeat" - depends on APUS - help - Use the power-on LED on your machine as a load meter. The exact - behavior is platform-dependent, but normally the flash frequency is - a hyperbolic function of the 5-minute load average. - -config PROC_HARDWARE - bool "/proc/hardware support" - depends on APUS - -source "drivers/zorro/Kconfig" - -config PCI_PERMEDIA - bool "PCI for Permedia2" - depends on !4xx && !8xx && APUS diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index c18ac821ce4..63c535d0253 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -751,32 +751,6 @@ extern void paging_init(void); #define pte_to_pgoff(pte) (pte_val(pte) >> 3) #define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) -/* CONFIG_APUS */ -/* For virtual address to physical address conversion */ -extern void cache_clear(__u32 addr, int length); -extern void cache_push(__u32 addr, int length); -extern int mm_end_of_chunk (unsigned long addr, int len); - -/* Values for nocacheflag and cmode */ -/* These are not used by the APUS kernel_map, but prevents - compilation errors. */ -#define KERNELMAP_FULL_CACHING 0 -#define KERNELMAP_NOCACHE_SER 1 -#define KERNELMAP_NOCACHE_NONSER 2 -#define KERNELMAP_NO_COPYBACK 3 - -/* - * Map some physical address range into the kernel address space. - */ -extern unsigned long kernel_map(unsigned long paddr, unsigned long size, - int nocacheflag, unsigned long *memavailp ); - -/* - * Set cache mode of (kernel space) address range. - */ -extern void kernel_set_cachemode (unsigned long address, unsigned long size, - unsigned int cmode); - /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define kern_addr_valid(addr) (1)