From: Paul Walmsley Date: Wed, 28 Jan 2009 19:08:11 +0000 (-0700) Subject: [ARM] OMAP3 clock: fix DPLL jitter correction and rate programming X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f0587b63c24e0c7539c6e77f1bfc68e6053608c7;p=linux-2.6-omap-h63xx.git [ARM] OMAP3 clock: fix DPLL jitter correction and rate programming Fix DPLL jitter correction programming. Previously, omap3_noncore_dpll_program() stored the FREQSEL jitter correction parameter to the wrong register. This caused jitter correction to be set incorrectly and also caused the DPLL divider to be programmed incorrectly. Also, fix DPLL divider programming. An off-by-one error existed in omap3_noncore_dpll_program(), causing DPLLs to be programmed with a higher divider than intended. linux-omap source commit is 5c0ec88a2145cdf2f2c9cc5fae49635c4c2476c7. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index cb5e068feb5..fdfc7d58291 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -563,14 +563,17 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ _omap3_noncore_dpll_bypass(clk); + /* Set jitter correction */ + v = __raw_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + __raw_writel(v, dd->control_reg); + + /* Set DPLL multiplier, divider */ v = __raw_readl(dd->mult_div1_reg); v &= ~(dd->mult_mask | dd->div1_mask); - - /* Set mult (M), div1 (N), freqsel */ v |= m << __ffs(dd->mult_mask); - v |= n << __ffs(dd->div1_mask); - v |= freqsel << __ffs(dd->freqsel_mask); - + v |= (n - 1) << __ffs(dd->div1_mask); __raw_writel(v, dd->mult_div1_reg); /* We let the clock framework set the other output dividers later */