From: Tejun Heo Date: Wed, 1 Nov 2006 09:38:52 +0000 (+0900) Subject: [PATCH] libata: implement ATA_EHI_PRINTINFO X-Git-Tag: v2.6.20-rc2~6^2~13^2~14^2~62 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=efdaedc443e935eda82e9e78a6e65d1f993d242f;p=linux-2.6-omap-h63xx.git [PATCH] libata: implement ATA_EHI_PRINTINFO Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 315f46841f6..e294731a7ed 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1377,7 +1377,6 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap) /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure - * @print_info: Enable device info printout * * Configure @dev according to @dev->id. Generic and low-level * driver specific fixups are also applied. @@ -1388,9 +1387,10 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise */ -int ata_dev_configure(struct ata_device *dev, int print_info) +int ata_dev_configure(struct ata_device *dev) { struct ata_port *ap = dev->ap; + int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; unsigned int xfer_mask; char revbuf[7]; /* XYZ-99\0 */ @@ -1638,7 +1638,9 @@ int ata_bus_probe(struct ata_port *ap) if (rc) goto fail; - rc = ata_dev_configure(dev, 1); + ap->eh_context.i.flags |= ATA_EHI_PRINTINFO; + rc = ata_dev_configure(dev); + ap->eh_context.i.flags &= ~ATA_EHI_PRINTINFO; if (rc) goto fail; } @@ -3045,7 +3047,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset) memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); /* configure device according to the new ID */ - rc = ata_dev_configure(dev, 0); + rc = ata_dev_configure(dev); if (rc == 0) return 0; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 02b2b2787d9..7c446442616 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1661,8 +1661,11 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, dev->class = ehc->classes[dev->devno]; rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); - if (rc == 0) - rc = ata_dev_configure(dev, 1); + if (rc == 0) { + ehc->i.flags |= ATA_EHI_PRINTINFO; + rc = ata_dev_configure(dev); + ehc->i.flags &= ~ATA_EHI_PRINTINFO; + } if (rc) { dev->class = ATA_DEV_UNKNOWN; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index c83300055ec..e4ffb2e3899 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -54,7 +54,7 @@ extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd); extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, int post_reset, u16 *id); extern int ata_dev_revalidate(struct ata_device *dev, int post_reset); -extern int ata_dev_configure(struct ata_device *dev, int print_info); +extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_port *ap); extern int sata_set_spd_needed(struct ata_port *ap); extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index ca8d9931247..f844a1faba1 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -534,6 +534,7 @@ static void sil_thaw(struct ata_port *ap) */ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) { + int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO; unsigned int n, quirks = 0; unsigned char model_num[41]; @@ -549,16 +550,18 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) if (slow_down || ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE))) { - ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix " - "(mod15write workaround)\n"); + if (print_info) + ata_dev_printk(dev, KERN_INFO, "applying Seagate " + "errata fix (mod15write workaround)\n"); dev->max_sectors = 15; return; } /* limit to udma5 */ if (quirks & SIL_QUIRK_UDMA5MAX) { - ata_dev_printk(dev, KERN_INFO, - "applying Maxtor errata fix %s\n", model_num); + if (print_info) + ata_dev_printk(dev, KERN_INFO, "applying Maxtor " + "errata fix %s\n", model_num); dev->udma_mask &= ATA_UDMA5; return; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 41fa0890dbf..949484627e6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -283,6 +283,7 @@ enum { ATA_EHI_QUIET = (1 << 3), /* be quiet */ ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ + ATA_EHI_PRINTINFO = (1 << 17), /* print configuration info */ ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,