From: Sergei Shtylyov Date: Thu, 27 Mar 2008 19:05:57 +0000 (+0300) Subject: [MIPS] Alchemy: kill useless time variables X-Git-Tag: v2.6.26-rc1~700^2~32 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=eba8291b514e6e590be161afcbfdab58cc5da6b8;p=linux-2.6-omap-h63xx.git [MIPS] Alchemy: kill useless time variables Since the commit 91a2fcc88634663e9e13dcdfad0e4a860e64aeee ([MIPS] Consolidate all variants of MIPS cp0 timer interrupt handlers) removed the Alchemy specific timer handler, 'r4k_offset' and 'r4k_cur' variables became practically useless, so get rid of them at last, renaming cal_r4off() function into calc_clock() and making it return CPU frequency. Also, make 'no_au1xxx_32khz' variable static... Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c index 79e0b0a51ac..12f5458142a 100644 --- a/arch/mips/au1000/common/dbg_io.c +++ b/arch/mips/au1000/common/dbg_io.c @@ -56,7 +56,7 @@ typedef unsigned int uint32; #define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y)) extern unsigned long get_au1x00_uart_baud_base(void); -extern unsigned long cal_r4koff(void); +extern unsigned long calc_clock(void); void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) { @@ -64,7 +64,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) if (UART16550_READ(UART_MOD_CNTRL) != 0x3) { UART16550_WRITE(UART_MOD_CNTRL, 3); } - cal_r4koff(); + calc_clock(); /* disable interrupts */ UART16550_WRITE(UART_IER, 0); diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index 1966964590a..57aea3164d9 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -48,9 +48,7 @@ #include #include -static unsigned long r4k_offset; /* Amount to increment compare reg each time */ -static unsigned long r4k_cur; /* What counter should be at next timer irq */ -int no_au1xxx_32khz; +static int no_au1xxx_32khz; extern int allow_au1k_wait; /* default off for CP0 Counter */ #ifdef CONFIG_PM @@ -184,7 +182,7 @@ wakeup_counter0_set(int ticks) * "wait" is enabled, and we need to detect if the 32KHz isn't present * but requested......got it? :-) -- Dan */ -unsigned long cal_r4koff(void) +unsigned long calc_clock(void) { unsigned long cpu_speed; unsigned long flags; @@ -229,19 +227,13 @@ unsigned long cal_r4koff(void) // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); spin_unlock_irqrestore(&time_lock, flags); - return (cpu_speed / HZ); + return cpu_speed; } void __init plat_time_init(void) { - unsigned int est_freq; + unsigned int est_freq = calc_clock(); - printk("calculating r4koff... "); - r4k_offset = cal_r4koff(); - printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); - - //est_freq = 2*r4k_offset*HZ; - est_freq = r4k_offset*HZ; est_freq += 5000; /* round */ est_freq -= est_freq%10000; printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, @@ -249,9 +241,6 @@ void __init plat_time_init(void) set_au1x00_speed(est_freq); set_au1x00_lcd_clock(); // program the LCD clock - r4k_cur = (read_c0_count() + r4k_offset); - write_c0_compare(r4k_cur); - #ifdef CONFIG_PM /* * setup counter 0, since it keeps ticking after a