From: Mark Brown <broonie@sirena.org.uk>
Date: Sat, 4 Apr 2009 00:24:47 +0000 (-0700)
Subject: OMAP: Don't warn user about expected behaviour in mmc-twl4030
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=e8acebfbfd355bc52a6a18c173c400f15cb8e4a9;p=linux-2.6-omap-h63xx.git

OMAP: Don't warn user about expected behaviour in mmc-twl4030

The approach that's being taken by the mmc-twl4030 driver to disabling
regulators is a normal and supported one so there is no need to print
messages on the console warning about this - their system is functioning
normally.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index cb56fe270ab..46d6e9bcadf 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -136,14 +136,11 @@ static int twl_mmc_late_init(struct device *dev)
 			 * (which is safe for MMC, but not in general).
 			 */
 			if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
-				dev_warn(dev, "APPLY REGULATOR HACK for vmmc\n");
 				regulator_enable(hsmmc[i].vcc);
 				regulator_disable(hsmmc[i].vcc);
 			}
 			if (hsmmc[i].vcc_aux) {
 				if (regulator_is_enabled(reg) > 0) {
-					dev_warn(dev, "APPLY REGULATOR HACK "
-						"for vmmc_aux\n");
 					regulator_enable(reg);
 					regulator_disable(reg);
 				}