From: Frans Pop Date: Fri, 1 Feb 2008 22:09:16 +0000 (+0100) Subject: ide/Kconfig: use 'on-board' instead of 'built-in' in config options X-Git-Tag: v2.6.25-rc1~1078^2~98 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=e665d50543981efef940178b95994b73ec41b77d;p=linux-2.6-omap-h63xx.git ide/Kconfig: use 'on-board' instead of 'built-in' in config options To avoid confusion between 'built-in' drivers and 'on-board' controllers, consistently use the term 'on-board' for controllers. Minor line-wrapping improvements in descriptions for config options. [ Bart: thanks to Jan for 'built-in'->'on-board' suggestion ] Signed-off-by: Frans Pop Cc: Jan Engelhardt Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 64df55e20ab..92b01170d8f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -617,8 +617,8 @@ config BLK_DEV_SC1200 tristate "National SCx200 chipset support" select BLK_DEV_IDEDMA_PCI help - This driver adds support for the built in IDE on the National - SCx200 series of embedded x86 "Geode" systems + This driver adds support for the on-board IDE controller on the + National SCx200 series of embedded x86 "Geode" systems. config BLK_DEV_PIIX tristate "Intel PIIXn chipsets support" @@ -793,22 +793,22 @@ config BLK_DEV_CELLEB depends on PPC_CELLEB select BLK_DEV_IDEDMA_PCI help - This driver provides support for the built-in IDE controller on + This driver provides support for the on-board IDE controller on Toshiba Cell Reference Board. If unsure, say Y. endif config BLK_DEV_IDE_PMAC - tristate "Builtin PowerMac IDE support" + tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y help - This driver provides support for the built-in IDE controller on + This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. If unsure, say Y. config BLK_DEV_IDE_PMAC_ATA100FIRST - bool "Probe internal ATA/100 (Kauai) first" + bool "Probe on-board ATA/100 (Kauai) first" depends on BLK_DEV_IDE_PMAC help This option will cause the ATA/100 controller found in UniNorth2 @@ -823,7 +823,7 @@ config BLK_DEV_IDEDMA_PMAC depends on BLK_DEV_IDE_PMAC select BLK_DEV_IDEDMA_PCI help - This option allows the driver for the built-in IDE controller on + This option allows the driver for the on-board IDE controller on Power Macintoshes and PowerBooks to use DMA (direct memory access) to transfer data to and from memory. Saying Y is safe and improves performance. @@ -934,7 +934,7 @@ config BLK_DEV_GAYLE help This is the IDE driver for the Amiga Gayle IDE interface. It supports both the `A1200 style' and `A4000 style' of the Gayle IDE interface, - This includes builtin IDE interfaces on some Amiga models (A600, + This includes on-board IDE interfaces on some Amiga models (A600, A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion bus (M-Tech E-Matrix 530 expansion card). Say Y if you have an Amiga with a Gayle IDE interface and want to use @@ -948,10 +948,10 @@ config BLK_DEV_IDEDOUBLER depends on BLK_DEV_GAYLE && EXPERIMENTAL ---help--- This driver provides support for the so-called `IDE doublers' (made - by various manufacturers, e.g. Eyetech) that can be connected to the - builtin IDE interface of some Amiga models. Using such an IDE - doubler, you can connect up to four instead of two IDE devices on - the Amiga's builtin IDE interface. + by various manufacturers, e.g. Eyetech) that can be connected to + the on-board IDE interface of some Amiga models. Using such an IDE + doubler, you can connect up to four instead of two IDE devices to + the Amiga's on-board IDE interface. Note that the normal Amiga Gayle IDE driver may not work correctly if you have an IDE doubler and don't enable this driver! @@ -963,9 +963,9 @@ config BLK_DEV_BUDDHA tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" depends on ZORRO && EXPERIMENTAL help - This is the IDE driver for the IDE interfaces on the Buddha, - Catweasel and X-Surf expansion boards. It supports up to two interfaces - on the Buddha, three on the Catweasel and two on the X-Surf. + This is the IDE driver for the IDE interfaces on the Buddha, Catweasel + and X-Surf expansion boards. It supports up to two interfaces on the + Buddha, three on the Catweasel and two on the X-Surf. Say Y if you have a Buddha or Catweasel expansion board and want to use IDE devices (hard disks, CD-ROM drives, etc.) that are connected @@ -975,23 +975,23 @@ config BLK_DEV_FALCON_IDE tristate "Falcon IDE interface support" depends on ATARI help - This is the IDE driver for the builtin IDE interface on the Atari + This is the IDE driver for the on-board IDE interface on the Atari Falcon. Say Y if you have a Falcon and want to use IDE devices (hard - disks, CD-ROM drives, etc.) that are connected to the builtin IDE + disks, CD-ROM drives, etc.) that are connected to the on-board IDE interface. config BLK_DEV_MAC_IDE tristate "Macintosh Quadra/Powerbook IDE interface support" depends on MAC help - This is the IDE driver for the builtin IDE interface on some m68k + This is the IDE driver for the on-board IDE interface on some m68k Macintosh models. It supports both the `Quadra style' (used in Quadra/ Centris 630 and Performa 588 models) and `Powerbook style' (used in the Powerbook 150 and 190 models) IDE interface. Say Y if you have such an Macintosh model and want to use IDE devices (hard disks, CD-ROM drives, etc.) that are connected to the - builtin IDE interface. + on-board IDE interface. config BLK_DEV_Q40IDE tristate "Q40/Q60 IDE interface support" @@ -1062,8 +1062,8 @@ config BLK_DEV_ALI14XX boot parameter. It enables support for the secondary IDE interface of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster I/O speeds to be set as well. See the files - and for - more info. + and + for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -1088,8 +1088,8 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - and for - more info. + and + for more info. config BLK_DEV_UMC8672 tristate "UMC-8672 support"