From: Bartlomiej Zolnierkiewicz Date: Mon, 29 Dec 2008 19:27:37 +0000 (+0100) Subject: ide: move Power Management support to ide-pm.c X-Git-Tag: v2.6.29-rc1~561^2~4 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=e2984c628c924442132304ae662da433f41c05c9;p=linux-2.6-omap-h63xx.git ide: move Power Management support to ide-pm.c There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 7818d402b18..bdc7b81bc04 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -5,7 +5,7 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ - ide-taskfile.o ide-park.o ide-pio-blacklist.o + ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o # core IDE code ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 26d3f3cacc8..ecacc008fda 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -120,98 +120,6 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) } EXPORT_SYMBOL(ide_end_request); -static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) -{ - struct request_pm_state *pm = rq->data; - -#ifdef DEBUG_PM - printk(KERN_INFO "%s: complete_power_step(step: %d)\n", - drive->name, pm->pm_step); -#endif - if (drive->media != ide_disk) - return; - - switch (pm->pm_step) { - case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ - if (pm->pm_state == PM_EVENT_FREEZE) - pm->pm_step = IDE_PM_COMPLETED; - else - pm->pm_step = IDE_PM_STANDBY; - break; - case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - pm->pm_step = IDE_PM_COMPLETED; - break; - case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ - pm->pm_step = IDE_PM_IDLE; - break; - case IDE_PM_IDLE: /* Resume step 2 (idle)*/ - pm->pm_step = IDE_PM_RESTORE_DMA; - break; - } -} - -static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) -{ - struct request_pm_state *pm = rq->data; - ide_task_t *args = rq->special; - - memset(args, 0, sizeof(*args)); - - switch (pm->pm_step) { - case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ - if (drive->media != ide_disk) - break; - /* Not supported? Switch to next step now. */ - if (ata_id_flush_enabled(drive->id) == 0 || - (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { - ide_complete_power_step(drive, rq); - return ide_stopped; - } - if (ata_id_flush_ext_enabled(drive->id)) - args->tf.command = ATA_CMD_FLUSH_EXT; - else - args->tf.command = ATA_CMD_FLUSH; - goto out_do_tf; - case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - args->tf.command = ATA_CMD_STANDBYNOW1; - goto out_do_tf; - case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ - ide_set_max_pio(drive); - /* - * skip IDE_PM_IDLE for ATAPI devices - */ - if (drive->media != ide_disk) - pm->pm_step = IDE_PM_RESTORE_DMA; - else - ide_complete_power_step(drive, rq); - return ide_stopped; - case IDE_PM_IDLE: /* Resume step 2 (idle) */ - args->tf.command = ATA_CMD_IDLEIMMEDIATE; - goto out_do_tf; - case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ - /* - * Right now, all we do is call ide_set_dma(drive), - * we could be smarter and check for current xfer_speed - * in struct drive etc... - */ - if (drive->hwif->dma_ops == NULL) - break; - /* - * TODO: respect IDE_DFLAG_USING_DMA - */ - ide_set_dma(drive); - break; - } - - pm->pm_step = IDE_PM_COMPLETED; - return ide_stopped; - -out_do_tf: - args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - args->data_phase = TASKFILE_NO_DATA; - return do_rw_taskfile(drive, args); -} - /** * ide_end_dequeued_request - complete an IDE I/O * @drive: IDE device for the I/O @@ -236,39 +144,6 @@ int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq, } EXPORT_SYMBOL_GPL(ide_end_dequeued_request); - -/** - * ide_complete_pm_request - end the current Power Management request - * @drive: target drive - * @rq: request - * - * This function cleans up the current PM request and stops the queue - * if necessary. - */ -static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq) -{ - struct request_queue *q = drive->queue; - unsigned long flags; - -#ifdef DEBUG_PM - printk("%s: completing PM request, %s\n", drive->name, - blk_pm_suspend_request(rq) ? "suspend" : "resume"); -#endif - spin_lock_irqsave(q->queue_lock, flags); - if (blk_pm_suspend_request(rq)) { - blk_stop_queue(q); - } else { - drive->dev_flags &= ~IDE_DFLAG_BLOCKED; - blk_start_queue(q); - } - spin_unlock_irqrestore(q->queue_lock, flags); - - drive->hwif->hwgroup->rq = NULL; - - if (blk_end_request(rq, 0, 0)) - BUG(); -} - /** * ide_end_drive_cmd - end an explicit drive command * @drive: command @@ -697,40 +572,6 @@ static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) } } -static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) -{ - struct request_pm_state *pm = rq->data; - - if (blk_pm_suspend_request(rq) && - pm->pm_step == IDE_PM_START_SUSPEND) - /* Mark drive blocked when starting the suspend sequence. */ - drive->dev_flags |= IDE_DFLAG_BLOCKED; - else if (blk_pm_resume_request(rq) && - pm->pm_step == IDE_PM_START_RESUME) { - /* - * The first thing we do on wakeup is to wait for BSY bit to - * go away (with a looong timeout) as a drive on this hwif may - * just be POSTing itself. - * We do that before even selecting as the "other" device on - * the bus may be broken enough to walk on our toes at this - * point. - */ - ide_hwif_t *hwif = drive->hwif; - int rc; -#ifdef DEBUG_PM - printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name); -#endif - rc = ide_wait_not_busy(hwif, 35000); - if (rc) - printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); - SELECT_DRIVE(drive); - hwif->tp_ops->set_irq(hwif, 1); - rc = ide_wait_not_busy(hwif, 100000); - if (rc) - printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); - } -} - /** * start_request - start of I/O and command issuing for IDE * diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c new file mode 100644 index 00000000000..8282c6086e6 --- /dev/null +++ b/drivers/ide/ide-pm.c @@ -0,0 +1,235 @@ +#include +#include +#include + +int generic_ide_suspend(struct device *dev, pm_message_t mesg) +{ + ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); + ide_hwif_t *hwif = HWIF(drive); + struct request *rq; + struct request_pm_state rqpm; + ide_task_t args; + int ret; + + /* call ACPI _GTM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) + ide_acpi_get_timing(hwif); + + memset(&rqpm, 0, sizeof(rqpm)); + memset(&args, 0, sizeof(args)); + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_PM_SUSPEND; + rq->special = &args; + rq->data = &rqpm; + rqpm.pm_step = IDE_PM_START_SUSPEND; + if (mesg.event == PM_EVENT_PRETHAW) + mesg.event = PM_EVENT_FREEZE; + rqpm.pm_state = mesg.event; + + ret = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); + + /* call ACPI _PS3 only after both devices are suspended */ + if (ret == 0 && ((drive->dn & 1) || pair == NULL)) + ide_acpi_set_state(hwif, 0); + + return ret; +} + +int generic_ide_resume(struct device *dev) +{ + ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); + ide_hwif_t *hwif = HWIF(drive); + struct request *rq; + struct request_pm_state rqpm; + ide_task_t args; + int err; + + /* call ACPI _PS0 / _STM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) { + ide_acpi_set_state(hwif, 1); + ide_acpi_push_timing(hwif); + } + + ide_acpi_exec_tfs(drive); + + memset(&rqpm, 0, sizeof(rqpm)); + memset(&args, 0, sizeof(args)); + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_PM_RESUME; + rq->cmd_flags |= REQ_PREEMPT; + rq->special = &args; + rq->data = &rqpm; + rqpm.pm_step = IDE_PM_START_RESUME; + rqpm.pm_state = PM_EVENT_ON; + + err = blk_execute_rq(drive->queue, NULL, rq, 1); + blk_put_request(rq); + + if (err == 0 && dev->driver) { + ide_driver_t *drv = to_ide_driver(dev->driver); + + if (drv->resume) + drv->resume(drive); + } + + return err; +} + +void ide_complete_power_step(ide_drive_t *drive, struct request *rq) +{ + struct request_pm_state *pm = rq->data; + +#ifdef DEBUG_PM + printk(KERN_INFO "%s: complete_power_step(step: %d)\n", + drive->name, pm->pm_step); +#endif + if (drive->media != ide_disk) + return; + + switch (pm->pm_step) { + case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ + if (pm->pm_state == PM_EVENT_FREEZE) + pm->pm_step = IDE_PM_COMPLETED; + else + pm->pm_step = IDE_PM_STANDBY; + break; + case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ + pm->pm_step = IDE_PM_COMPLETED; + break; + case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ + pm->pm_step = IDE_PM_IDLE; + break; + case IDE_PM_IDLE: /* Resume step 2 (idle)*/ + pm->pm_step = IDE_PM_RESTORE_DMA; + break; + } +} + +ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) +{ + struct request_pm_state *pm = rq->data; + ide_task_t *args = rq->special; + + memset(args, 0, sizeof(*args)); + + switch (pm->pm_step) { + case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ + if (drive->media != ide_disk) + break; + /* Not supported? Switch to next step now. */ + if (ata_id_flush_enabled(drive->id) == 0 || + (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { + ide_complete_power_step(drive, rq); + return ide_stopped; + } + if (ata_id_flush_ext_enabled(drive->id)) + args->tf.command = ATA_CMD_FLUSH_EXT; + else + args->tf.command = ATA_CMD_FLUSH; + goto out_do_tf; + case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ + args->tf.command = ATA_CMD_STANDBYNOW1; + goto out_do_tf; + case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ + ide_set_max_pio(drive); + /* + * skip IDE_PM_IDLE for ATAPI devices + */ + if (drive->media != ide_disk) + pm->pm_step = IDE_PM_RESTORE_DMA; + else + ide_complete_power_step(drive, rq); + return ide_stopped; + case IDE_PM_IDLE: /* Resume step 2 (idle) */ + args->tf.command = ATA_CMD_IDLEIMMEDIATE; + goto out_do_tf; + case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ + /* + * Right now, all we do is call ide_set_dma(drive), + * we could be smarter and check for current xfer_speed + * in struct drive etc... + */ + if (drive->hwif->dma_ops == NULL) + break; + /* + * TODO: respect IDE_DFLAG_USING_DMA + */ + ide_set_dma(drive); + break; + } + + pm->pm_step = IDE_PM_COMPLETED; + return ide_stopped; + +out_do_tf: + args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + args->data_phase = TASKFILE_NO_DATA; + return do_rw_taskfile(drive, args); +} + +/** + * ide_complete_pm_request - end the current Power Management request + * @drive: target drive + * @rq: request + * + * This function cleans up the current PM request and stops the queue + * if necessary. + */ +void ide_complete_pm_request(ide_drive_t *drive, struct request *rq) +{ + struct request_queue *q = drive->queue; + unsigned long flags; + +#ifdef DEBUG_PM + printk("%s: completing PM request, %s\n", drive->name, + blk_pm_suspend_request(rq) ? "suspend" : "resume"); +#endif + spin_lock_irqsave(q->queue_lock, flags); + if (blk_pm_suspend_request(rq)) { + blk_stop_queue(q); + } else { + drive->dev_flags &= ~IDE_DFLAG_BLOCKED; + blk_start_queue(q); + } + spin_unlock_irqrestore(q->queue_lock, flags); + + drive->hwif->hwgroup->rq = NULL; + + if (blk_end_request(rq, 0, 0)) + BUG(); +} + +void ide_check_pm_state(ide_drive_t *drive, struct request *rq) +{ + struct request_pm_state *pm = rq->data; + + if (blk_pm_suspend_request(rq) && + pm->pm_step == IDE_PM_START_SUSPEND) + /* Mark drive blocked when starting the suspend sequence. */ + drive->dev_flags |= IDE_DFLAG_BLOCKED; + else if (blk_pm_resume_request(rq) && + pm->pm_step == IDE_PM_START_RESUME) { + /* + * The first thing we do on wakeup is to wait for BSY bit to + * go away (with a looong timeout) as a drive on this hwif may + * just be POSTing itself. + * We do that before even selecting as the "other" device on + * the bus may be broken enough to walk on our toes at this + * point. + */ + ide_hwif_t *hwif = drive->hwif; + int rc; +#ifdef DEBUG_PM + printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name); +#endif + rc = ide_wait_not_busy(hwif, 35000); + if (rc) + printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); + SELECT_DRIVE(drive); + hwif->tp_ops->set_irq(hwif, 1); + rc = ide_wait_not_busy(hwif, 100000); + if (rc) + printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); + } +} diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 41d04205354..f0f09f702e9 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -388,80 +388,6 @@ ide_ext_devset_rw_sync(unmaskirq, unmaskirq); ide_ext_devset_rw_sync(using_dma, using_dma); __IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode); -static int generic_ide_suspend(struct device *dev, pm_message_t mesg) -{ - ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); - ide_hwif_t *hwif = HWIF(drive); - struct request *rq; - struct request_pm_state rqpm; - ide_task_t args; - int ret; - - /* call ACPI _GTM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) - ide_acpi_get_timing(hwif); - - memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_PM_SUSPEND; - rq->special = &args; - rq->data = &rqpm; - rqpm.pm_step = IDE_PM_START_SUSPEND; - if (mesg.event == PM_EVENT_PRETHAW) - mesg.event = PM_EVENT_FREEZE; - rqpm.pm_state = mesg.event; - - ret = blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); - - /* call ACPI _PS3 only after both devices are suspended */ - if (ret == 0 && ((drive->dn & 1) || pair == NULL)) - ide_acpi_set_state(hwif, 0); - - return ret; -} - -static int generic_ide_resume(struct device *dev) -{ - ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); - ide_hwif_t *hwif = HWIF(drive); - struct request *rq; - struct request_pm_state rqpm; - ide_task_t args; - int err; - - /* call ACPI _PS0 / _STM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) { - ide_acpi_set_state(hwif, 1); - ide_acpi_push_timing(hwif); - } - - ide_acpi_exec_tfs(drive); - - memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_PM_RESUME; - rq->cmd_flags |= REQ_PREEMPT; - rq->special = &args; - rq->data = &rqpm; - rqpm.pm_step = IDE_PM_START_RESUME; - rqpm.pm_state = PM_EVENT_ON; - - err = blk_execute_rq(drive->queue, NULL, rq, 1); - blk_put_request(rq); - - if (err == 0 && dev->driver) { - ide_driver_t *drv = to_ide_driver(dev->driver); - - if (drv->resume) - drv->resume(drive); - } - - return err; -} - /** * ide_device_get - get an additional reference to a ide_drive_t * @drive: device to get a reference to diff --git a/include/linux/ide.h b/include/linux/ide.h index 9b89cab6d49..e99c56de7f5 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1116,6 +1116,14 @@ enum { IDE_PM_COMPLETED, }; +int generic_ide_suspend(struct device *, pm_message_t); +int generic_ide_resume(struct device *); + +void ide_complete_power_step(ide_drive_t *, struct request *); +ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *); +void ide_complete_pm_request(ide_drive_t *, struct request *); +void ide_check_pm_state(ide_drive_t *, struct request *); + /* * Subdrivers support. *