From: Ronald S. Bultje Date: Mon, 17 Oct 2005 03:29:25 +0000 (-0700) Subject: [PATCH] fix black/white-only svideo input in vpx3220 decoder X-Git-Tag: v2.6.14-rc5~35 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=de21eb63add932c61e018d20a760dcaed8c3e40c;p=linux-2.6-omap-h63xx.git [PATCH] fix black/white-only svideo input in vpx3220 decoder Fix the fact that the svideo input will only give input in black/white in some circumstances. Reason is that in the PCI controller driver (zr36067), after setting input, we reset norm, which overwrites the input register with the default. This patch makes it always set the correct value for the input when changing norm. Signed-off-by: Ronald S. Bultje Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 2bafca45c08..137b58f2c66 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -408,6 +408,12 @@ vpx3220_command (struct i2c_client *client, case DECODER_SET_NORM: { int *iarg = arg, data; + int temp_input; + + /* Here we back up the input selection because it gets + overwritten when we fill the registers with the + choosen video norm */ + temp_input = vpx3220_fp_read(client, 0xf2); dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n", I2C_NAME(client), *iarg); @@ -447,6 +453,10 @@ vpx3220_command (struct i2c_client *client, } decoder->norm = *iarg; + + /* And here we set the backed up video input again */ + vpx3220_fp_write(client, 0xf2, temp_input | 0x0010); + udelay(10); } break;