From: Alan Stern Date: Fri, 11 Aug 2006 15:33:58 +0000 (-0400) Subject: UHCI: increase Resume-Detect-off delay X-Git-Tag: v2.6.19-rc1~899^2~60 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=de06a3b842b31b31220637c869f112cfbc1a5ef6;p=linux-2.6-omap-h63xx.git UHCI: increase Resume-Detect-off delay The UHCI controller in my laptop takes longer to turn off the Resume-Detect bit than the 4 us allowed by uhci-hcd. Presumably other computers will have the same problem. This patch (as752) increases the maximum delay to 10 us, which should be plenty, and uses polling to avoid penalizing systems which can turn the bit off more quickly. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index c545ef92fe2..16fb72eb6fc 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -84,6 +84,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, unsigned long port_addr) { int status; + int i; if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) { CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD); @@ -92,9 +93,14 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, /* The controller won't actually turn off the RD bit until * it has had a chance to send a low-speed EOP sequence, - * which takes 3 bit times (= 2 microseconds). We'll delay - * slightly longer for good luck. */ - udelay(4); + * which is supposed to take 3 bit times (= 2 microseconds). + * Experiments show that some controllers take longer, so + * we'll poll for completion. */ + for (i = 0; i < 10; ++i) { + if (!(inw(port_addr) & USBPORTSC_RD)) + break; + udelay(1); + } } clear_bit(port, &uhci->resuming_ports); }