From: Vladislav Zolotarov Date: Wed, 13 Aug 2008 22:50:00 +0000 (-0700) Subject: bnx2x: Load/Unload under traffic X-Git-Tag: v2.6.27-rc4~103^2~21 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=da5a662a2326931bef25f0e534c9c1702f862399;p=linux-2.6-omap-h63xx.git bnx2x: Load/Unload under traffic Load/Unload under traffic Few issues were found when loading and unloading under traffic: - When receiving Tx interrupt call netif_wake_queue if the queue is stopped but the state is open - Check that interrupts are enabled before doing anything else on the msix_fp_int function - In nic_load, enable the interrupts only when needed and ready for it - Function stop_leading returns status since it can fail - Add 1ms delay when unloading the driver to validate that there are no open transactions that already started by the FW - Splitting the "has work" function into Tx and Rx so the same function will be used on unload and interrupts - Do not request for WoL if only resetting the device (save the time that it takes the FW to set the link after reset) - Fixing the device reset after iSCSI boot and before driver load - all internal buffers must be cleared before the driver is loaded Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 9cbf0e82ef3..b9aa6f48ae2 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -274,6 +274,15 @@ struct bnx2x_fastpath { #define bnx2x_fp(bp, nr, var) (bp->fp[nr].var) +#define BNX2X_HAS_TX_WORK(fp) \ + ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \ + (fp->tx_pkt_prod != fp->tx_pkt_cons)) + +#define BNX2X_HAS_RX_WORK(fp) \ + (fp->rx_comp_cons != le16_to_cpu(*fp->rx_cons_sb)) + +#define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp)) + /* MC hsi */ #define MAX_FETCH_BD 13 /* HW max BDs per packet */ diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 6115161334a..dfa8c7b00cb 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -717,21 +717,6 @@ static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp) return rc; } -static inline int bnx2x_has_work(struct bnx2x_fastpath *fp) -{ - u16 rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; - - if ((fp->rx_comp_cons != rx_cons_sb) || - (fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || - (fp->tx_pkt_prod != fp->tx_pkt_cons)) - return 1; - - return 0; -} - static u16 bnx2x_ack_int(struct bnx2x *bp) { u32 igu_addr = (IGU_ADDR_SIMD_MASK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8; @@ -899,6 +884,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work) netif_tx_lock(bp->dev); if (netif_queue_stopped(bp->dev) && + (bp->state == BNX2X_STATE_OPEN) && (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)) netif_wake_queue(bp->dev); @@ -1617,6 +1603,12 @@ static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie) struct net_device *dev = bp->dev; int index = FP_IDX(fp); + /* Return here if interrupt is disabled */ + if (unlikely(atomic_read(&bp->intr_sem) != 0)) { + DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n"); + return IRQ_HANDLED; + } + DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB [%d:%d]\n", index, FP_SB_ID(fp)); bnx2x_ack_sb(bp, FP_SB_ID(fp), USTORM_ID, 0, IGU_INT_DISABLE, 0); @@ -6230,22 +6222,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (!BP_NOMCP(bp)) { load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); if (!load_code) { - BNX2X_ERR("MCP response failure, unloading\n"); + BNX2X_ERR("MCP response failure, aborting\n"); return -EBUSY; } if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) return -EBUSY; /* other port in diagnostic mode */ } else { + int port = BP_PORT(bp); + DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n", load_count[0], load_count[1], load_count[2]); load_count[0]++; - load_count[1 + BP_PORT(bp)]++; + load_count[1 + port]++; DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n", load_count[0], load_count[1], load_count[2]); if (load_count[0] == 1) load_code = FW_MSG_CODE_DRV_LOAD_COMMON; - else if (load_count[1 + BP_PORT(bp)] == 1) + else if (load_count[1 + port] == 1) load_code = FW_MSG_CODE_DRV_LOAD_PORT; else load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; @@ -6294,9 +6288,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bnx2x_fp(bp, i, disable_tpa) = ((bp->flags & TPA_ENABLE_FLAG) == 0); - /* Disable interrupt handling until HW is initialized */ - atomic_set(&bp->intr_sem, 1); - if (bp->flags & USING_MSIX_FLAG) { rc = bnx2x_req_msix_irqs(bp); if (rc) { @@ -6323,9 +6314,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) goto load_error; } - /* Enable interrupt handling */ - atomic_set(&bp->intr_sem, 0); - /* Setup NIC internals and enable interrupts */ bnx2x_nic_init(bp, load_code); @@ -6333,7 +6321,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (!BP_NOMCP(bp)) { load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE); if (!load_code) { - BNX2X_ERR("MCP response failure, unloading\n"); + BNX2X_ERR("MCP response failure, aborting\n"); rc = -EBUSY; goto load_int_disable; } @@ -6348,11 +6336,12 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) for_each_queue(bp, i) napi_enable(&bnx2x_fp(bp, i, napi)); + /* Enable interrupt handling */ + atomic_set(&bp->intr_sem, 0); + rc = bnx2x_setup_leading(bp); if (rc) { -#ifdef BNX2X_STOP_ON_ERROR - bp->panic = 1; -#endif + BNX2X_ERR("Setup leading failed!\n"); goto load_stop_netif; } @@ -6386,7 +6375,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) break; case LOAD_OPEN: - /* IRQ is only requested from bnx2x_open */ netif_start_queue(bp->dev); bnx2x_set_rx_mode(bp->dev); if (bp->flags & USING_MSIX_FLAG) @@ -6458,7 +6446,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) return rc; } -static void bnx2x_stop_leading(struct bnx2x *bp) +static int bnx2x_stop_leading(struct bnx2x *bp) { u16 dsb_sp_prod_idx; /* if the other port is handling traffic, @@ -6476,7 +6464,7 @@ static void bnx2x_stop_leading(struct bnx2x *bp) rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, 0, &(bp->fp[0].state), 1); if (rc) /* timeout */ - return; + return rc; dsb_sp_prod_idx = *bp->dsb_sp_prod; @@ -6495,13 +6483,18 @@ static void bnx2x_stop_leading(struct bnx2x *bp) *bp->dsb_sp_prod, dsb_sp_prod_idx); #ifdef BNX2X_STOP_ON_ERROR bnx2x_panic(); +#else + rc = -EBUSY; #endif break; } cnt--; + msleep(1); } bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; bp->fp[0].state = BNX2X_FP_STATE_CLOSED; + + return rc; } static void bnx2x_reset_func(struct bnx2x *bp) @@ -6586,8 +6579,9 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) /* msut be called with rtnl_lock */ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) { + int port = BP_PORT(bp); u32 reset_code = 0; - int i, cnt; + int i, cnt, rc; bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; @@ -6604,22 +6598,17 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq)); bnx2x_stats_handle(bp, STATS_EVENT_STOP); - /* Wait until all fast path tasks complete */ + /* Wait until tx fast path tasks complete */ for_each_queue(bp, i) { struct bnx2x_fastpath *fp = &bp->fp[i]; -#ifdef BNX2X_STOP_ON_ERROR -#ifdef __powerpc64__ - DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n", -#else - DP(NETIF_MSG_IFDOWN, "fp->tpa_queue_used = 0x%llx\n", -#endif - fp->tpa_queue_used); -#endif cnt = 1000; smp_rmb(); - while (bnx2x_has_work(fp)) { - msleep(1); + while (BNX2X_HAS_TX_WORK(fp)) { + + if (!netif_running(bp->dev)) + bnx2x_tx_int(fp, 1000); + if (!cnt) { BNX2X_ERR("timeout waiting for queue[%d]\n", i); @@ -6631,14 +6620,13 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) #endif } cnt--; + msleep(1); smp_rmb(); } } - /* Wait until all slow path tasks complete */ - cnt = 1000; - while ((bp->spq_left != MAX_SPQ_PENDING) && cnt--) - msleep(1); + /* Give HW time to discard old tx messages */ + msleep(1); for_each_queue(bp, i) napi_disable(&bnx2x_fp(bp, i, napi)); @@ -6648,52 +6636,51 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Release IRQs */ bnx2x_free_irq(bp); - if (bp->flags & NO_WOL_FLAG) + if (unload_mode == UNLOAD_NORMAL) + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + else if (bp->flags & NO_WOL_FLAG) { reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; + if (CHIP_IS_E1H(bp)) + REG_WR(bp, MISC_REG_E1HMF_MODE, 0); - else if (bp->wol) { - u32 emac_base = BP_PORT(bp) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + } else if (bp->wol) { + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; u8 *mac_addr = bp->dev->dev_addr; u32 val; - /* The mac address is written to entries 1-4 to preserve entry 0 which is used by the PMF */ + u8 entry = (BP_E1HVN(bp) + 1)*8; + val = (mac_addr[0] << 8) | mac_addr[1]; - EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8, val); + EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + entry, val); val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | (mac_addr[4] << 8) | mac_addr[5]; - EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8 + 4, - val); + EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + entry + 4, val); reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; } else reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + if (CHIP_IS_E1H(bp)) + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); + /* Close multi and leading connections Completions for ramrods are collected in a synchronous way */ for_each_nondefault_queue(bp, i) if (bnx2x_stop_multi(bp, i)) goto unload_error; - if (CHIP_IS_E1H(bp)) - REG_WR(bp, NIG_REG_LLH0_FUNC_EN + BP_PORT(bp)*8, 0); - - bnx2x_stop_leading(bp); -#ifdef BNX2X_STOP_ON_ERROR - /* If ramrod completion timed out - break here! */ - if (bp->panic) { + rc = bnx2x_stop_leading(bp); + if (rc) { BNX2X_ERR("Stop leading failed!\n"); +#ifdef BNX2X_STOP_ON_ERROR return -EBUSY; - } +#else + goto unload_error; #endif - - if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) || - (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) { - DP(NETIF_MSG_IFDOWN, "failed to close leading properly! " - "state 0x%x fp[0].state 0x%x\n", - bp->state, bp->fp[0].state); } unload_error: @@ -6703,12 +6690,12 @@ unload_error: DP(NETIF_MSG_IFDOWN, "NO MCP load counts %d, %d, %d\n", load_count[0], load_count[1], load_count[2]); load_count[0]--; - load_count[1 + BP_PORT(bp)]--; + load_count[1 + port]--; DP(NETIF_MSG_IFDOWN, "NO MCP new load counts %d, %d, %d\n", load_count[0], load_count[1], load_count[2]); if (load_count[0] == 0) reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; - else if (load_count[1 + BP_PORT(bp)] == 0) + else if (load_count[1 + port] == 0) reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT; else reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION; @@ -6780,50 +6767,86 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) /* Check if it is the UNDI driver * UNDI driver initializes CID offset for normal bell to 0x7 */ + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; - /* save our func and fw_seq */ + /* save our func */ int func = BP_FUNC(bp); - u16 fw_seq = bp->fw_seq; + u32 swap_en; + u32 swap_val; BNX2X_DEV_INFO("UNDI is active! reset device\n"); /* try unload UNDI on port 0 */ bp->func = 0; - bp->fw_seq = (SHMEM_RD(bp, - func_mb[bp->func].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - + bp->fw_seq = + (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); reset_code = bnx2x_fw_command(bp, reset_code); - bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); /* if UNDI is loaded on the other port */ if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) { + /* send "DONE" for previous unload */ + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + + /* unload UNDI on port 1 */ bp->func = 1; - bp->fw_seq = (SHMEM_RD(bp, - func_mb[bp->func].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - - bnx2x_fw_command(bp, - DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS); - bnx2x_fw_command(bp, - DRV_MSG_CODE_UNLOAD_DONE); - - /* restore our func and fw_seq */ - bp->func = func; - bp->fw_seq = fw_seq; + bp->fw_seq = + (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + bnx2x_fw_command(bp, reset_code); } + REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 : + HC_REG_CONFIG_0), 0x1000); + + /* close input traffic and wait for it */ + /* Do not rcv packets to BRB */ + REG_WR(bp, + (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_DRV_MASK : + NIG_REG_LLH0_BRB1_DRV_MASK), 0x0); + /* Do not direct rcv packets that are not for MCP to + * the BRB */ + REG_WR(bp, + (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_NOT_MCP : + NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); + /* clear AEU */ + REG_WR(bp, + (BP_PORT(bp) ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0), 0); + msleep(10); + + /* save NIG port swap info */ + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); /* reset device */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, - 0xd3ffff7f); + 0xd3ffffff); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403); + /* take the NIG out of reset and restore swap values */ + REG_WR(bp, + GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + MISC_REGISTERS_RESET_REG_1_RST_NIG); + REG_WR(bp, NIG_REG_PORT_SWAP, swap_val); + REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en); + + /* send unload done to the MCP */ + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + + /* restore our func and fw_seq */ + bp->func = func; + bp->fw_seq = + (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); } + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_UNDI); } } @@ -7384,6 +7407,9 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) int func = BP_FUNC(bp); int rc; + /* Disable interrupt handling until HW is initialized */ + atomic_set(&bp->intr_sem, 1); + mutex_init(&bp->port.phy_mutex); INIT_WORK(&bp->sp_task, bnx2x_sp_task); @@ -9163,17 +9189,16 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) bnx2x_update_fpsb_idx(fp); - if ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || - (fp->tx_pkt_prod != fp->tx_pkt_cons)) + if (BNX2X_HAS_TX_WORK(fp)) bnx2x_tx_int(fp, budget); - if (le16_to_cpu(*fp->rx_cons_sb) != fp->rx_comp_cons) + if (BNX2X_HAS_RX_WORK(fp)) work_done = bnx2x_rx_int(fp, budget); - rmb(); /* bnx2x_has_work() reads the status block */ + rmb(); /* BNX2X_HAS_WORK() reads the status block */ /* must not complete if we consumed full budget */ - if ((work_done < budget) && !bnx2x_has_work(fp)) { + if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) { #ifdef BNX2X_STOP_ON_ERROR poll_panic: @@ -9408,7 +9433,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - " "silently dropping this SKB\n"); dev_kfree_skb_any(skb); - return 0; + return NETDEV_TX_OK; } } @@ -10200,7 +10225,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(dev); - bnx2x_nic_unload(bp, UNLOAD_NORMAL); + bnx2x_nic_unload(bp, UNLOAD_CLOSE); bnx2x_set_power_state(bp, pci_choose_state(pdev, state)); @@ -10233,7 +10258,7 @@ static int bnx2x_resume(struct pci_dev *pdev) bnx2x_set_power_state(bp, PCI_D0); netif_device_attach(dev); - rc = bnx2x_nic_load(bp, LOAD_NORMAL); + rc = bnx2x_nic_load(bp, LOAD_OPEN); rtnl_unlock(); diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 40c3a7735d2..b5313c209ca 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1677,6 +1677,7 @@ /* [RW 8] init credit counter for port0 in LLH */ #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554 #define NIG_REG_LLH0_XCM_MASK 0x10130 +#define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248 /* [RW 1] send to BRB1 if no match on any of RMP rules. */ #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc /* [RW 2] Determine the classification participants. 0: no classification.1: @@ -4962,6 +4963,7 @@ #define MISC_REGISTERS_GPIO_PORT_SHIFT 4 #define MISC_REGISTERS_GPIO_SET_POS 8 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 +#define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7) #define MISC_REGISTERS_RESET_REG_1_SET 0x584 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0) @@ -4997,6 +4999,7 @@ #define HW_LOCK_RESOURCE_8072_MDIO 0 #define HW_LOCK_RESOURCE_GPIO 1 #define HW_LOCK_RESOURCE_SPIO 2 +#define HW_LOCK_RESOURCE_UNDI 5 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31) #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)