From: Darron Broad Date: Tue, 30 Sep 2008 05:46:41 +0000 (-0300) Subject: V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U X-Git-Tag: v2.6.27-rc9~6^2~1 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=da3808e10faca68b064ac897753fa4e1707d29a4;p=linux-2.6-omap-h63xx.git V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U Correct firmware type to MTS Correct audio routing for composite/s-video Add DVB-T detection. This patch uses the eeprom hash method for detection as the vendor/product ids are also used for the DIGIVOX_AD. This may be a clone of the same product. Explanatory text has been added prior to the hask look-up in anticipation that it may help others. The following has been tested to work: Analogue TV (PAL-I) Composite In DVB-T (UK Crystal Palace) USB AUDIO The following has not been tested but probably works: S-Video In Signed-off-by: Darron Broad Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 89c7f32abf9..53449cb99b1 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -46,7 +46,7 @@ 45 -> Pinnacle PCTV DVB-T (em2870) 46 -> Compro, VideoMate U3 (em2870) [185b:2870] 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] - 48 -> KWorld DVB-T 310U (em2880) + 48 -> KWorld DVB-T 310U (em2880) [eb1a:e310] 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c7456e97665..279307cc3ad 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -930,22 +930,23 @@ struct em28xx_board em28xx_boards[] = { }, [EM2880_BOARD_KWORLD_DVB_310U] = { .name = "KWorld DVB-T 310U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .vchannels = 3, .tuner_type = TUNER_XC2028, + .has_dvb = 1, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, - .amux = 0, + .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, - .amux = 1, - }, { + .amux = EM28XX_AMUX_AC97_LINE_IN, + }, { /* S-video has not been tested yet */ .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, - .amux = 1, + .amux = EM28XX_AMUX_AC97_LINE_IN, } }, }, [EM2881_BOARD_DNT_DA2_HYBRID] = { @@ -1260,6 +1261,7 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = { static struct em28xx_hash_table em28xx_eeprom_hash [] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, + {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -1745,6 +1747,20 @@ void em28xx_card_setup(struct em28xx *dev) break; case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: + /* + * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. + * + * This occurs because they share identical USB vendor and + * product IDs. + * + * What we do here is look up the EEPROM hash of the K-WORLD + * and if it is found then we decide that we do not have + * a DIGIVOX and reset the device to the K-WORLD instead. + * + * This solution is only valid if they do not share eeprom + * hash identities which has not been determined as yet. + */ + case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); break; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 4b992bc0083..d2b1a1a5268 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -452,6 +452,15 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_KWORLD_DVB_310U: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_zl10353_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" " isn't supported yet\n",