From: Grant Likely Date: Mon, 27 Nov 2006 21:16:24 +0000 (-0700) Subject: [POWERPC] Put mpc52xx support file in platforms/52xx X-Git-Tag: v2.6.20-rc2~6^2~13^2~13^2~25 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=d4150248fc769c7a69c61cb9d95dfac14950d8cf;p=linux-2.6-omap-h63xx.git [POWERPC] Put mpc52xx support file in platforms/52xx platforms/embedded6xx is probably going away, and 52xx boards need some extra support the 52xx interrupt controller and DMA engine anyway. It makes sense to group all the 52xx bits into a single path. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 836caf1e943..a6bc221ad1b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -410,6 +410,10 @@ config PPC_CHRP select PPC_NATIVE default y +config PPC_MPC52xx + bool + default n + config PPC_EFIKA bool "bPlan Efika 5k2. MPC5200B based computer" depends on PPC_MULTIPLATFORM && PPC32 diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 234a861870a..910d50a8333 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -146,15 +146,6 @@ config PQ2FADS Select PQ2FADS if you wish to configure for a Freescale PQ2FADS board (-VR or -ZU). -config LITE5200 - bool "Freescale LITE5200 / (IceCube)" - select PPC_MPC52xx - help - Support for the LITE5200 dev board for the MPC5200 from Freescale. - This is for the LITE5200 version 2.0 board. Don't know if it changes - much but it's only been tested on this board version. I think this - board is also known as IceCube. - config EV64360 bool "Marvell-EV64360BP" help @@ -172,9 +163,6 @@ config TQM8xxL depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) default y -config PPC_MPC52xx - bool - config 8260 bool "CPM2 Support" if WILLOW depends on 6xx