From: Russell King Date: Wed, 27 Sep 2006 14:27:33 +0000 (+0100) Subject: [ARM] Split ARM MM initialisation for !mmu X-Git-Tag: v2.6.19-rc1~885^2^2~16 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=d111e8f9644aa585c1a7e198d74a4d2682ef1374;p=linux-2.6-omap-h63xx.git [ARM] Split ARM MM initialisation for !mmu Move the MMU specific code from init.c into mmu.c, and add nommu fixups to nommu.c Signed-off-by: Russell King --- diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 1a1563f859a..cabaa3b3054 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -6,7 +6,7 @@ obj-y := consistent.o extable.o fault.o init.o \ iomap.o obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \ - mm-armv.o + mm-armv.o mmu.o ifneq ($(CONFIG_MMU),y) obj-y += nommu.o diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 83145d1d338..22217fe2650 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -27,10 +27,7 @@ #include "mm.h" -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end; +extern void _text, _etext, __data_start, _end, __init_begin, __init_end; extern unsigned long phys_initrd_start; extern unsigned long phys_initrd_size; @@ -40,17 +37,6 @@ extern unsigned long phys_initrd_size; */ static struct meminfo meminfo __initdata = { 0, }; -/* - * empty_zero_page is a special page that is used for - * zero-initialized data and COW. - */ -struct page *empty_zero_page; - -/* - * The pmd table for the upper-most set of pages. - */ -pmd_t *top_pmd; - void show_mem(void) { int free = 0, total = 0, reserved = 0; @@ -173,87 +159,9 @@ static int __init check_initrd(struct meminfo *mi) return initrd_node; } -/* - * Reserve the various regions of node 0 - */ -static __init void reserve_node_zero(pg_data_t *pgdat) -{ - unsigned long res_size = 0; - - /* - * Register the kernel text and data with bootmem. - * Note that this can only be in node 0. - */ -#ifdef CONFIG_XIP_KERNEL - reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); -#else - reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); -#endif - - /* - * Reserve the page tables. These are already in use, - * and can only be in node 0. - */ - reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), - PTRS_PER_PGD * sizeof(pgd_t)); - - /* - * Hmm... This should go elsewhere, but we really really need to - * stop things allocating the low memory; ideally we need a better - * implementation of GFP_DMA which does not assume that DMA-able - * memory starts at zero. - */ - if (machine_is_integrator() || machine_is_cintegrator()) - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; - - /* - * These should likewise go elsewhere. They pre-reserve the - * screen memory region at the start of main system memory. - */ - if (machine_is_edb7211()) - res_size = 0x00020000; - if (machine_is_p720t()) - res_size = 0x00014000; - -#ifdef CONFIG_SA1111 - /* - * Because of the SA1111 DMA bug, we want to preserve our - * precious DMA-able memory... - */ - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; -#endif - if (res_size) - reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); -} - -static inline void prepare_page_table(struct meminfo *mi) -{ - unsigned long addr; - - /* - * Clear out all the mappings below the kernel image. - */ - for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - -#ifdef CONFIG_XIP_KERNEL - /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK; -#endif - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Clear out all the kernel space mappings, except for the first - * memory bank, up to the end of the vmalloc region. - */ - for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); - addr < VMALLOC_END; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); -} - static inline void map_memory_bank(struct membank *bank) { +#ifdef CONFIG_MMU struct map_desc map; map.pfn = __phys_to_pfn(bank->start); @@ -262,6 +170,7 @@ static inline void map_memory_bank(struct membank *bank) map.type = MT_MEMORY; create_mapping(&map); +#endif } static unsigned long __init @@ -373,7 +282,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) return end_pfn; } -static void __init bootmem_init(struct meminfo *mi) +void __init bootmem_init(struct meminfo *mi) { unsigned long memend_pfn = 0; int node, initrd_node, i; @@ -387,8 +296,6 @@ static void __init bootmem_init(struct meminfo *mi) memcpy(&meminfo, mi, sizeof(meminfo)); - prepare_page_table(mi); - /* * Locate which node contains the ramdisk image, if any. */ @@ -422,114 +329,6 @@ static void __init bootmem_init(struct meminfo *mi) max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; } -/* - * Set up device the mappings. Since we clear out the page tables for all - * mappings above VMALLOC_END, we will remove any debug device mappings. - * This means you have to be careful how you debug this function, or any - * called function. This means you can't use any function or debugging - * method which may touch any device, otherwise the kernel _will_ crash. - */ -static void __init devicemaps_init(struct machine_desc *mdesc) -{ - struct map_desc map; - unsigned long addr; - void *vectors; - - /* - * Allocate the vector page early. - */ - vectors = alloc_bootmem_low_pages(PAGE_SIZE); - BUG_ON(!vectors); - - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Map the kernel if it is XIP. - * It is always first in the modulearea. - */ -#ifdef CONFIG_XIP_KERNEL - map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); - map.virtual = MODULE_START; - map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; - map.type = MT_ROM; - create_mapping(&map); -#endif - - /* - * Map the cache flushing regions. - */ -#ifdef FLUSH_BASE - map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); - map.virtual = FLUSH_BASE; - map.length = SZ_1M; - map.type = MT_CACHECLEAN; - create_mapping(&map); -#endif -#ifdef FLUSH_BASE_MINICACHE - map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M); - map.virtual = FLUSH_BASE_MINICACHE; - map.length = SZ_1M; - map.type = MT_MINICLEAN; - create_mapping(&map); -#endif - - /* - * Create a mapping for the machine vectors at the high-vectors - * location (0xffff0000). If we aren't using high-vectors, also - * create a mapping at the low-vectors virtual address. - */ - map.pfn = __phys_to_pfn(virt_to_phys(vectors)); - map.virtual = 0xffff0000; - map.length = PAGE_SIZE; - map.type = MT_HIGH_VECTORS; - create_mapping(&map); - - if (!vectors_high()) { - map.virtual = 0; - map.type = MT_LOW_VECTORS; - create_mapping(&map); - } - - /* - * Ask the machine support to map in the statically mapped devices. - */ - if (mdesc->map_io) - mdesc->map_io(); - - /* - * Finally flush the caches and tlb to ensure that we're in a - * consistent state wrt the writebuffer. This also ensures that - * any write-allocated cache lines in the vector page are written - * back. After this point, we can start to touch devices again. - */ - local_flush_tlb_all(); - flush_cache_all(); -} - -/* - * paging_init() sets up the page tables, initialises the zone memory - * maps, and sets up the zero page, bad page and bad page tables. - */ -void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) -{ - void *zero_page; - - build_mem_type_table(); - bootmem_init(mi); - devicemaps_init(mdesc); - - top_pmd = pmd_off_k(0xffff0000); - - /* - * allocate the zero page. Note that we count on this going ok. - */ - zero_page = alloc_bootmem_low_pages(PAGE_SIZE); - memzero(zero_page, PAGE_SIZE); - empty_zero_page = virt_to_page(zero_page); - flush_dcache_page(empty_zero_page); -} - static inline void free_area(unsigned long addr, unsigned long end, char *s) { unsigned int size = (end - addr) >> 10; diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 8d73ffbce8d..083c51d3903 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -14,6 +14,10 @@ static inline pmd_t *pmd_off_k(unsigned long virt) } struct map_desc; +struct meminfo; +struct pglist_data; void __init build_mem_type_table(void); void __init create_mapping(struct map_desc *md); +void __init bootmem_init(struct meminfo *mi); +void reserve_node_zero(struct pglist_data *pgdat); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c new file mode 100644 index 00000000000..9648e6800ff --- /dev/null +++ b/arch/arm/mm/mmu.c @@ -0,0 +1,229 @@ +/* + * linux/arch/arm/mm/mmu.c + * + * Copyright (C) 1995-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "mm.h" + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + +extern void _stext, __data_start, _end; +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* + * empty_zero_page is a special page that is used for + * zero-initialized data and COW. + */ +struct page *empty_zero_page; + +/* + * The pmd table for the upper-most set of pages. + */ +pmd_t *top_pmd; + +static inline void prepare_page_table(struct meminfo *mi) +{ + unsigned long addr; + + /* + * Clear out all the mappings below the kernel image. + */ + for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + +#ifdef CONFIG_XIP_KERNEL + /* The XIP kernel is mapped in the module area -- skip over it */ + addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK; +#endif + for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + + /* + * Clear out all the kernel space mappings, except for the first + * memory bank, up to the end of the vmalloc region. + */ + for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); + addr < VMALLOC_END; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); +} + +/* + * Reserve the various regions of node 0 + */ +void __init reserve_node_zero(pg_data_t *pgdat) +{ + unsigned long res_size = 0; + + /* + * Register the kernel text and data with bootmem. + * Note that this can only be in node 0. + */ +#ifdef CONFIG_XIP_KERNEL + reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); +#else + reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); +#endif + + /* + * Reserve the page tables. These are already in use, + * and can only be in node 0. + */ + reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), + PTRS_PER_PGD * sizeof(pgd_t)); + + /* + * Hmm... This should go elsewhere, but we really really need to + * stop things allocating the low memory; ideally we need a better + * implementation of GFP_DMA which does not assume that DMA-able + * memory starts at zero. + */ + if (machine_is_integrator() || machine_is_cintegrator()) + res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; + + /* + * These should likewise go elsewhere. They pre-reserve the + * screen memory region at the start of main system memory. + */ + if (machine_is_edb7211()) + res_size = 0x00020000; + if (machine_is_p720t()) + res_size = 0x00014000; + +#ifdef CONFIG_SA1111 + /* + * Because of the SA1111 DMA bug, we want to preserve our + * precious DMA-able memory... + */ + res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; +#endif + if (res_size) + reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); +} + +/* + * Set up device the mappings. Since we clear out the page tables for all + * mappings above VMALLOC_END, we will remove any debug device mappings. + * This means you have to be careful how you debug this function, or any + * called function. This means you can't use any function or debugging + * method which may touch any device, otherwise the kernel _will_ crash. + */ +static void __init devicemaps_init(struct machine_desc *mdesc) +{ + struct map_desc map; + unsigned long addr; + void *vectors; + + /* + * Allocate the vector page early. + */ + vectors = alloc_bootmem_low_pages(PAGE_SIZE); + BUG_ON(!vectors); + + for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); + + /* + * Map the kernel if it is XIP. + * It is always first in the modulearea. + */ +#ifdef CONFIG_XIP_KERNEL + map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); + map.virtual = MODULE_START; + map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; + map.type = MT_ROM; + create_mapping(&map); +#endif + + /* + * Map the cache flushing regions. + */ +#ifdef FLUSH_BASE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); + map.virtual = FLUSH_BASE; + map.length = SZ_1M; + map.type = MT_CACHECLEAN; + create_mapping(&map); +#endif +#ifdef FLUSH_BASE_MINICACHE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M); + map.virtual = FLUSH_BASE_MINICACHE; + map.length = SZ_1M; + map.type = MT_MINICLEAN; + create_mapping(&map); +#endif + + /* + * Create a mapping for the machine vectors at the high-vectors + * location (0xffff0000). If we aren't using high-vectors, also + * create a mapping at the low-vectors virtual address. + */ + map.pfn = __phys_to_pfn(virt_to_phys(vectors)); + map.virtual = 0xffff0000; + map.length = PAGE_SIZE; + map.type = MT_HIGH_VECTORS; + create_mapping(&map); + + if (!vectors_high()) { + map.virtual = 0; + map.type = MT_LOW_VECTORS; + create_mapping(&map); + } + + /* + * Ask the machine support to map in the statically mapped devices. + */ + if (mdesc->map_io) + mdesc->map_io(); + + /* + * Finally flush the caches and tlb to ensure that we're in a + * consistent state wrt the writebuffer. This also ensures that + * any write-allocated cache lines in the vector page are written + * back. After this point, we can start to touch devices again. + */ + local_flush_tlb_all(); + flush_cache_all(); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + void *zero_page; + + build_mem_type_table(); + prepare_page_table(mi); + bootmem_init(mi); + devicemaps_init(mdesc); + + top_pmd = pmd_off_k(0xffff0000); + + /* + * allocate the zero page. Note that we count on this going ok. + */ + zero_page = alloc_bootmem_low_pages(PAGE_SIZE); + memzero(zero_page, PAGE_SIZE); + empty_zero_page = virt_to_page(zero_page); + flush_dcache_page(empty_zero_page); +} diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 1464ed817b5..e369aeb0c25 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -11,6 +11,42 @@ #include #include +#include "mm.h" + +extern void _stext, __data_start, _end; + +/* + * Reserve the various regions of node 0 + */ +void __init reserve_node_zero(pg_data_t *pgdat) +{ + /* + * Register the kernel text and data with bootmem. + * Note that this can only be in node 0. + */ +#ifdef CONFIG_XIP_KERNEL + reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start); +#else + reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext); +#endif + + /* + * Register the exception vector page. + * some architectures which the DRAM is the exception vector to trap, + * alloc_page breaks with error, although it is not NULL, but "0." + */ + reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + bootmem_init(mi); +} + void flush_dcache_page(struct page *page) { __cpuc_flush_dcache_page(page_address(page));