From: Michael Abbott <michael.abbott@diamond.ac.uk>
Date: Wed, 14 May 2008 23:29:24 +0000 (-0700)
Subject: [ARM] colibri: fix support for DM9000 ethernet device
X-Git-Tag: v2.6.26-rc3~20^2~5
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=d0afc85f15deda94abdfe9118ac225c4208d5897;p=linux-2.6-omap-h63xx.git

[ARM] colibri: fix support for DM9000 ethernet device

Two changes are necessary to enable proper operation of the DM9000 device with
the Colibri PXA 270 board: firstly, the IRQ type needs to be configured for
rising edge interrupts, and secondly this configuration needs to be
communicated through to the DM9000.

[akpm@linux-foundation.org: remove set_irq_type() call as per ben-linux request]
Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Cc: Daniel Mack <daniel@caiaq.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 43bf5a183e9..574839d7c13 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= COLIBRI_ETH_IRQ,
 		.end	= COLIBRI_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
 	/* DM9000 LAN */
 	pxa_gpio_mode(GPIO78_nCS_2_MD);
 	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-	set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
 
 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }