From: Tony Battersby Date: Fri, 14 Dec 2007 20:45:16 +0000 (-0500) Subject: [SCSI] sym53c8xx: fix "irq X: nobody cared" regression X-Git-Tag: v2.6.24-rc6~15^2~3 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=cedefa13db502432905c29819c195f46805b13eb;p=linux-2.6-omap-h63xx.git [SCSI] sym53c8xx: fix "irq X: nobody cared" regression The patch described by the following excerpt from ChangeLog-2.6.24-rc1 eventually causes a "irq X: nobody cared" error after a while: commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE After this happens, the kernel disables the IRQ, causing the SCSI card to stop working until the next reboot. The problem is caused by the interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after handling an interrupt-on-the-fly (INTF) condition. The following patch fixes the problem. Signed-off-by: Tony Battersby Acked-by: Matthew Wilcox Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 463f119f20e..254bdaeb35f 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2791,7 +2791,7 @@ irqreturn_t sym_interrupt(struct Scsi_Host *shost) istat = INB(np, nc_istat); if (istat & INTF) { OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem); - istat = INB(np, nc_istat); /* DUMMY READ */ + istat |= INB(np, nc_istat); /* DUMMY READ */ if (DEBUG_FLAGS & DEBUG_TINY) printf ("F "); sym_wakeup_done(np); }