From: Sergei Shtylyov Date: Tue, 29 Apr 2008 19:33:47 +0000 (+0400) Subject: [MIPS] Pb1000: bury the remnants of the PCI code X-Git-Tag: v2.6.26-rc3~131^2 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=cb0e8b0fba53e1aa6c4786bc465cfc641e8a77e7;p=linux-2.6-omap-h63xx.git [MIPS] Pb1000: bury the remnants of the PCI code Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c index a06c653596c..25df167a95b 100644 --- a/arch/mips/au1000/pb1000/board_setup.c +++ b/arch/mips/au1000/pb1000/board_setup.c @@ -145,13 +145,6 @@ void __init board_setup(void) au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ -#ifdef CONFIG_PCI - au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0 - au_writel(0, SDRAM_MBAR); // set mbar to 0 - au_writel(0x2, SDRAM_CMD); // enable memory accesses - au_sync_delay(1); -#endif - /* * Enable Au1000 BCLK switching - note: sed1356 must not use * its BCLK (Au1000 LCLK) for any timings