From: Mika Laitio <lamikr@pilppa.org>
Date: Wed, 11 Feb 2009 17:05:59 +0000 (+0200)
Subject: h63xx: very initial mmc support.
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=ca50f1a98281f2831d32c57dc126b1c35cfbac01;p=linux-2.6-omap-h63xx.git

h63xx: very initial mmc support.
---

diff --git a/arch/arm/mach-omap1/board-h6300.c b/arch/arm/mach-omap1/board-h6300.c
index 04faa97e1a6..c29090c3628 100644
--- a/arch/arm/mach-omap1/board-h6300.c
+++ b/arch/arm/mach-omap1/board-h6300.c
@@ -29,6 +29,7 @@
 #include <mach/gpio.h>
 #include <mach/common.h>
 #include <mach/board.h>
+#include <mach/mmc.h>
 
 static struct platform_device h6300_lcd_device = {
 	.name	= "lcd_h6300",
@@ -54,6 +55,91 @@ static struct omap_usb_config h6300_usb_config __initdata = {
 	.pins[0]	= 0,
 };
 
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+//#define H6300_GPIO_MMC_POWER	13
+#define H6300_GPIO_MMC_WRITE_PROTECT	13
+#define H6300_GPIO_MMC_CARD_DETECT	15
+
+
+static int h6300_mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+/*
+	int err;
+	u8 dat = 0;
+
+	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+
+	if (power_on)
+		dat |= SOFIA_MMC_POWER;
+	else
+		dat &= ~SOFIA_MMC_POWER;
+
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+*/
+/*
+	if (power_on)
+		gpio_set_value(H6300_GPIO_MMC_POWER, 1);
+	else
+		gpio_set_value(H6300_GPIO_MMC_POWER, 0);
+*/
+	return 0;
+}
+
+/*
+static int h6300_mmc_get_cover_state(struct device *dev, int slot)
+{
+	return gpio_get_value(H6300_GPIO_MMC_CARD_DETECT);
+}
+*/
+
+static struct omap_mmc_platform_data h6300_mmc1_data = {
+	.nr_slots                       = 1,
+/*	.dma_mask			= 0xffffffff, */
+	.slots[0]       = {
+		.set_power		= h6300_mmc_set_power,
+/*		.get_cover_state	= h6300_mmc_get_cover_state, */
+		.gpio_wp		= H6300_GPIO_MMC_WRITE_PROTECT,	// input, write protect
+		.switch_pin		= H6300_GPIO_MMC_CARD_DETECT,	// input, card detect
+		.wires			= 4,
+		.name                   = "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *h6300_mmc_data[OMAP15XX_NR_MMC];
+
+static void __init h6300_mmc_init(void)
+{
+	h6300_mmc_data[0] = &h6300_mmc1_data;
+	omap1_init_mmc(h6300_mmc_data, OMAP15XX_NR_MMC);
+/*
+	int ret;
+
+	ret = gpio_request(H6300_GPIO_MMC_POWER, "MMC power");
+	if (ret < 0)
+		return;
+	gpio_direction_output(H6300_GPIO_MMC_POWER, 0);
+	mmc_data[0] = &h6300_mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
+
+	ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
+	if (ret < 0) {
+		gpio_free(NOKIA770_GPIO_MMC_POWER);
+		return;
+	}
+	gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
+*/
+}
+
+#else
+static inline void h6300_mmc_init(void)
+{
+}
+#endif
+
 static struct omap_board_config_kernel h6300_config[] = {
 	{ OMAP_TAG_LCD,		&h6300_lcd_config },
  	{ OMAP_TAG_UART,	&h6300_uart_config },
@@ -79,6 +165,7 @@ static void __init h6300_init(void)
 	omap_board_config_size	= ARRAY_SIZE(h6300_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+	//h6300_mmc_init();
 }
 
 static void __init h6300_map_io(void)