From: Alan Cox Date: Thu, 8 Mar 2007 23:13:50 +0000 (+0000) Subject: [PATCH] libata-acpi: Try and stop all the non PCI devices crashing X-Git-Tag: v2.6.21-rc4~82 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=ca4266359d0c1199af088447f209ab5bcc32a989;p=linux-2.6-omap-h63xx.git [PATCH] libata-acpi: Try and stop all the non PCI devices crashing For 2.6.20 it mostly used to just not work, for 2.6.21-rc it crashes, this seems to be down to luck (bad or good). The libata-acpi code needs to avoid doing PCI work on non-PCI devices. This is one hack although it's not pretty and perhaps there is a "right" way to check if a struct device * is PCI ? Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index d14a48e75f1..019d8ffdde5 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -34,6 +34,13 @@ struct taskfile_array { u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ }; +/* + * Helper - belongs in the PCI layer somewhere eventually + */ +static int is_pci_dev(struct device *dev) +{ + return (dev->bus == &pci_bus_type); +} /** * sata_get_dev_handle - finds acpi_handle and PCI device.function @@ -53,6 +60,9 @@ static int sata_get_dev_handle(struct device *dev, acpi_handle *handle, struct pci_dev *pci_dev; acpi_integer addr; + if (!is_pci_dev(dev)) + return -ENODEV; + pci_dev = to_pci_dev(dev); /* NOTE: PCI-specific */ /* Please refer to the ACPI spec for the syntax of _ADR. */ addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); @@ -84,7 +94,12 @@ static int pata_get_dev_handle(struct device *dev, acpi_handle *handle, acpi_status status; struct acpi_device_info *dinfo = NULL; int ret = -ENODEV; - struct pci_dev *pdev = to_pci_dev(dev); + struct pci_dev *pdev; + + if (!is_pci_dev(dev)) + return -ENODEV; + + pdev = to_pci_dev(dev); bus = pdev->bus->number; devnum = PCI_SLOT(pdev->devfn);