From: Stephen Hemminger Date: Wed, 19 Sep 2007 22:36:43 +0000 (-0700) Subject: sky2: ethtool speed report bug X-Git-Tag: v2.6.23-rc8~20^2~4 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c99210b50fe741026d86fdcb5f3f5a0c00c503cc;p=linux-2.6-omap-h63xx.git sky2: ethtool speed report bug On 100mbit versions, the driver always reports gigabit speed available. The correct modes are already computed, then overwritten. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 8b1565453f0..94552cc4c46 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2841,13 +2841,6 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) ecmd->supported = sky2_supported_modes(hw); ecmd->phy_address = PHY_ADDR_MARV; if (sky2_is_copper(hw)) { - ecmd->supported = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full - | SUPPORTED_Autoneg | SUPPORTED_TP; ecmd->port = PORT_TP; ecmd->speed = sky2->speed; } else {