From: Michael Chan <mchan@broadcom.com>
Date: Sun, 30 Apr 2006 01:55:17 +0000 (-0700)
Subject: [TG3]: Call netif_carrier_off() during phy reset
X-Git-Tag: v2.6.17-rc4~101^2~5
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c8e1e82b6a97ad44517517aa58b7b794ead0bf33;p=linux-2.6-omap-h63xx.git

[TG3]: Call netif_carrier_off() during phy reset

Add netif_carrier_off() call during tg3_phy_reset(). This is needed
to properly track the netif_carrier state in cases where we do a
PHY reset with interrupts disabled. The SerDes code will not run
properly if the netif_carrier state is wrong.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 73e271e59c6..a28accbfcdf 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -974,6 +974,8 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 	return err;
 }
 
+static void tg3_link_report(struct tg3 *);
+
 /* This will reset the tigon3 PHY if there is no valid
  * link unless the FORCE argument is non-zero.
  */
@@ -987,6 +989,11 @@ static int tg3_phy_reset(struct tg3 *tp)
 	if (err != 0)
 		return -EBUSY;
 
+	if (netif_running(tp->dev) && netif_carrier_ok(tp->dev)) {
+		netif_carrier_off(tp->dev);
+		tg3_link_report(tp);
+	}
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {