From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 5 Feb 2006 22:13:48 +0000 (+0100)
Subject: [PATCH] w83781d: Use real-time status registers
X-Git-Tag: v2.6.16-rc4~99^2~3
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c7f5d7edd8b3fa4204389efc4c9081cc90a811d2;p=linux-2.6-omap-h63xx.git

[PATCH] w83781d: Use real-time status registers

Use the real-time status registers of the Winbond W83782D, W83783S and
W83627HF chips, instead of the interrupt status registers. Interrupts
cannot be trusted at least for voltage inputs, as they are two-times
triggers (as opposed to comparator mode, which we want.) The w83627hf
driver was fixed in a similar way some times ago.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 557114872f3..64c1f8af5bb 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -95,11 +95,16 @@ MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
 						     (0x39)))
 
 #define W83781D_REG_CONFIG		0x40
+
+/* Interrupt status (W83781D, AS99127F) */
 #define W83781D_REG_ALARM1		0x41
 #define W83781D_REG_ALARM2		0x42
-#define W83781D_REG_ALARM3		0x450	/* not on W83781D */
 
-#define W83781D_REG_IRQ			0x4C
+/* Real-time status (W83782D, W83783S, W83627HF) */
+#define W83782D_REG_ALARM1		0x459
+#define W83782D_REG_ALARM2		0x45A
+#define W83782D_REG_ALARM3		0x45B
+
 #define W83781D_REG_BEEP_CONFIG		0x4D
 #define W83781D_REG_BEEP_INTS1		0x56
 #define W83781D_REG_BEEP_INTS2		0x57
@@ -1513,15 +1518,6 @@ w83781d_init_client(struct i2c_client *client)
 					W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
 			}
 		}
-
-		if (type != w83781d) {
-			/* enable comparator mode for temp2 and temp3 so
-			   alarm indication will work correctly */
-			i = w83781d_read_value(client, W83781D_REG_IRQ);
-			if (!(i & 0x40))
-				w83781d_write_value(client, W83781D_REG_IRQ,
-						    i | 0x40);
-		}
 	}
 
 	/* Start monitoring */
@@ -1612,14 +1608,25 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
 			data->fan_div[1] |= (i >> 4) & 0x04;
 			data->fan_div[2] |= (i >> 5) & 0x04;
 		}
-		data->alarms =
-		    w83781d_read_value(client,
-				       W83781D_REG_ALARM1) +
-		    (w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
 		if ((data->type == w83782d) || (data->type == w83627hf)) {
-			data->alarms |=
-			    w83781d_read_value(client,
-					       W83781D_REG_ALARM3) << 16;
+			data->alarms = w83781d_read_value(client,
+						W83782D_REG_ALARM1)
+				     | (w83781d_read_value(client,
+						W83782D_REG_ALARM2) << 8)
+				     | (w83781d_read_value(client,
+						W83782D_REG_ALARM3) << 16);
+		} else if (data->type == w83783s) {
+			data->alarms = w83781d_read_value(client,
+						W83782D_REG_ALARM1)
+				     | (w83781d_read_value(client,
+						W83782D_REG_ALARM2) << 8);
+		} else {
+			/* No real-time status registers, fall back to
+			   interrupt status registers */
+			data->alarms = w83781d_read_value(client,
+						W83781D_REG_ALARM1)
+				     | (w83781d_read_value(client,
+						W83781D_REG_ALARM2) << 8);
 		}
 		i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
 		data->beep_enable = i >> 7;