From: john stultz <johnstul@us.ibm.com>
Date: Tue, 26 Sep 2006 06:32:35 +0000 (-0700)
Subject: [PATCH] i386: Kill references to xtime
X-Git-Tag: v2.6.19-rc1~1118
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c7f40ff15aba95bc09a759024d62b2c344ef0856;p=linux-2.6-omap-h63xx.git

[PATCH] i386: Kill references to xtime

Remove all references to xtime in i386 and replace them w/
get/set_timeofday().  Requires some ugly and uncertain changes to APM, but
has been lightly tested to work.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index 24fd577861f..ff9ce4b5eaa 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -1154,9 +1154,11 @@ out:
 
 static void set_time(void)
 {
+	struct timespec ts;
 	if (got_clock_diff) {	/* Must know time zone in order to set clock */
-		xtime.tv_sec = get_cmos_time() + clock_cmos_diff;
-		xtime.tv_nsec = 0; 
+		ts.tv_sec = get_cmos_time() + clock_cmos_diff;
+		ts.tv_nsec = 0;
+		do_settimeofday(&ts);
 	} 
 }
 
@@ -1232,13 +1234,8 @@ static int suspend(int vetoable)
 	restore_processor_state();
 
 	local_irq_disable();
-	write_seqlock(&xtime_lock);
-	spin_lock(&i8253_lock);
-	reinit_timer();
 	set_time();
-
-	spin_unlock(&i8253_lock);
-	write_sequnlock(&xtime_lock);
+	reinit_timer();
 
 	if (err == APM_NO_ERROR)
 		err = APM_SUCCESS;
@@ -1365,9 +1362,7 @@ static void check_events(void)
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				write_seqlock_irq(&xtime_lock);
 				set_time();
-				write_sequnlock_irq(&xtime_lock);
 				device_resume();
 				pm_send_all(PM_RESUME, (void *)0);
 				queue_event(event, NULL);
@@ -1383,9 +1378,7 @@ static void check_events(void)
 			break;
 
 		case APM_UPDATE_TIME:
-			write_seqlock_irq(&xtime_lock);
 			set_time();
-			write_sequnlock_irq(&xtime_lock);
 			break;
 
 		case APM_CRITICAL_SUSPEND:
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index edd00f6cee3..6f333e7fb23 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -288,7 +288,7 @@ static int timer_resume(struct sys_device *dev)
 	unsigned long flags;
 	unsigned long sec;
 	unsigned long sleep_length;
-
+	struct timespec ts;
 #ifdef CONFIG_HPET_TIMER
 	if (is_hpet_enabled())
 		hpet_reenable();
@@ -296,9 +296,11 @@ static int timer_resume(struct sys_device *dev)
 	setup_pit_timer();
 	sec = get_cmos_time() + clock_cmos_diff;
 	sleep_length = (get_cmos_time() - sleep_start) * HZ;
+
+	ts.tv_sec = sec;
+	ts.tv_nsec = 0;
+	do_settimeofday(&ts);
 	write_seqlock_irqsave(&xtime_lock, flags);
-	xtime.tv_sec = sec;
-	xtime.tv_nsec = 0;
 	jiffies_64 += sleep_length;
 	wall_jiffies += sleep_length;
 	write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -334,10 +336,11 @@ extern void (*late_time_init)(void);
 /* Duplicate of time_init() below, with hpet_enable part added */
 static void __init hpet_time_init(void)
 {
-	xtime.tv_sec = get_cmos_time();
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
+	struct timespec ts;
+	ts.tv_sec = get_cmos_time();
+	ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+
+	do_settimeofday(&ts);
 
 	if ((hpet_enable() >= 0) && hpet_use_timer) {
 		printk("Using HPET for base-timer\n");
@@ -349,6 +352,7 @@ static void __init hpet_time_init(void)
 
 void __init time_init(void)
 {
+	struct timespec ts;
 #ifdef CONFIG_HPET_TIMER
 	if (is_hpet_capable()) {
 		/*
@@ -359,10 +363,10 @@ void __init time_init(void)
 		return;
 	}
 #endif
-	xtime.tv_sec = get_cmos_time();
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
+	ts.tv_sec = get_cmos_time();
+	ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+
+	do_settimeofday(&ts);
 
 	time_init_hook();
 }