From: Andi Kleen Date: Mon, 4 Feb 2008 15:48:03 +0000 (+0100) Subject: x86: move NUMAQ io handling into arch/x86/pci/numa.c X-Git-Tag: v2.6.25-rc1~1057^2~41 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c7e844f0415252c7e1a2153a97e7a0c511d61ada;p=linux-2.6-omap-h63xx.git x86: move NUMAQ io handling into arch/x86/pci/numa.c numa.c is the only user of the {in,out}*_quad functions. And it has only a few call sites. Change them to open code the magic NUMAQ port access. Signed-off-by: Andi Kleen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c index f5f165f69e0..55270c26237 100644 --- a/arch/x86/pci/numa.c +++ b/arch/x86/pci/numa.c @@ -5,36 +5,62 @@ #include #include #include +#include #include "pci.h" +#define XQUAD_PORTIO_BASE 0xfe400000 +#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ + #define BUS2QUAD(global) (mp_bus_id_to_node[global]) #define BUS2LOCAL(global) (mp_bus_id_to_local[global]) #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) +extern void *xquad_portio; /* Where the IO area was mapped */ +#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) + #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) +static void write_cf8(unsigned bus, unsigned devfn, unsigned reg) +{ + unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg); + if (xquad_portio) + writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus))); + else + outl(val, 0xCF8); +} + static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; + void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) return -EINVAL; spin_lock_irqsave(&pci_config_lock, flags); - outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus)); + write_cf8(bus, devfn, reg); switch (len) { case 1: - *value = inb_quad(0xCFC + (reg & 3), BUS2QUAD(bus)); + if (xquad_portio) + *value = readb(adr + (reg & 3)); + else + *value = inb(0xCFC + (reg & 3)); break; case 2: - *value = inw_quad(0xCFC + (reg & 2), BUS2QUAD(bus)); + if (xquad_portio) + *value = readw(adr + (reg & 2)); + else + *value = inw(0xCFC + (reg & 2)); break; case 4: - *value = inl_quad(0xCFC, BUS2QUAD(bus)); + if (xquad_portio) + *value = readl(adr); + else + *value = inl(0xCFC); break; } @@ -47,23 +73,33 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 value) { unsigned long flags; + void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) return -EINVAL; spin_lock_irqsave(&pci_config_lock, flags); - outl_quad(PCI_CONF1_MQ_ADDRESS(bus, devfn, reg), 0xCF8, BUS2QUAD(bus)); + write_cf8(bus, devfn, reg); switch (len) { case 1: - outb_quad((u8)value, 0xCFC + (reg & 3), BUS2QUAD(bus)); + if (xquad_portio) + writeb(value, adr + (reg & 3)); + else + outb((u8)value, 0xCFC + (reg & 3)); break; case 2: - outw_quad((u16)value, 0xCFC + (reg & 2), BUS2QUAD(bus)); + if (xquad_portio) + writew(value, adr + (reg & 2)); + else + outw((u16)value, 0xCFC + (reg & 2)); break; case 4: - outl_quad((u32)value, 0xCFC, BUS2QUAD(bus)); + if (xquad_portio) + writel(value, adr + reg); + else + outl((u32)value, 0xCFC); break; } diff --git a/include/asm-x86/mach-numaq/mach_apic.h b/include/asm-x86/mach-numaq/mach_apic.h index 17e183bd39c..3b637fac890 100644 --- a/include/asm-x86/mach-numaq/mach_apic.h +++ b/include/asm-x86/mach-numaq/mach_apic.h @@ -109,6 +109,8 @@ static inline int mpc_apic_id(struct mpc_config_processor *m, return logical_apicid; } +extern void *xquad_portio; + static inline void setup_portio_remap(void) { int num_quads = num_online_nodes();