From: Mark Nelson Date: Thu, 23 Oct 2008 03:08:16 +0000 (+1100) Subject: ahci: Add support for Promise PDC42819 X-Git-Tag: v2.6.28-rc3~93^2~8 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c77a036beceabbfd85b366193685cb49f38292bd;p=linux-2.6-omap-h63xx.git ahci: Add support for Promise PDC42819 Add an appropriate entry for the Promise PDC42819 controller. It has an AHCI mode and so far works correctly with board_ahci. This chip is found on Promise's FastTrak TX2650 (2 port) and TX4650 (4 port) software-based RAID cards (for which there is a binary driver, t3sas) and can be found on some motherboards, for example the MSI K9A2 Platinum, which calls the chip a Promise T3 controller. Although this controller also supports SAS devices, its default bootup mode is AHCI and the binary driver has to do some magic to get the chip into the appropriate mode to drive SAS disks. Seeing as no documentation is provided by Promise, adding this entry to the ahci driver allows the controller to be useful to people as a SATA controller (with no ill effects on the system if a SAS disk is connected - probing of the port just times out with "link online but device misclassified"), without having to resort to using the binary driver. Users who require SAS or the proprietary software raid can get this functionality using the binary driver. Signed-off-by: Mark Nelson Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index aeadd00411a..289719b2cb3 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -588,6 +588,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + /* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },