From: Jesper Juhl Date: Tue, 10 Jan 2006 04:53:57 +0000 (-0800) Subject: [PATCH] Docs update: small spelling, formating etc fixes for filesystems/ext3.txt X-Git-Tag: v2.6.16-rc1~506 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c63ca3c8b01e8cad4fe8874366e598bcbbdd048e;p=linux-2.6-omap-h63xx.git [PATCH] Docs update: small spelling, formating etc fixes for filesystems/ext3.txt Spelling fixes, formating changes and corrections for Documentation/filesystems/ext3.txt Signed-off-by: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 22e4040564d..f4d0de6bac6 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -2,11 +2,11 @@ Ext3 Filesystem =============== -ext3 was originally released in September 1999. Written by Stephen Tweedie -for 2.2 branch, and ported to 2.4 kernels by Peter Braam, Andreas Dilger, +Ext3 was originally released in September 1999. Written by Stephen Tweedie +for the 2.2 branch, and ported to 2.4 kernels by Peter Braam, Andreas Dilger, Andrew Morton, Alexander Viro, Ted Ts'o and Stephen Tweedie. -ext3 is ext2 filesystem enhanced with journalling capabilities. +Ext3 is the ext2 filesystem enhanced with journalling capabilities. Options ======= @@ -14,69 +14,71 @@ Options When mounting an ext3 filesystem, the following option are accepted: (*) == default -jounal=update Update the ext3 file system's journal to the - current format. +journal=update Update the ext3 file system's journal to the current + format. -journal=inum When a journal already exists, this option is - ignored. Otherwise, it specifies the number of - the inode which will represent the ext3 file - system's journal file. +journal=inum When a journal already exists, this option is ignored. + Otherwise, it specifies the number of the inode which + will represent the ext3 file system's journal file. journal_dev=devnum When the external journal device's major/minor numbers - have changed, this option allows to specify the new - journal location. The journal device is identified - through its new major/minor numbers encoded in devnum. + have changed, this option allows the user to specify + the new journal location. The journal device is + identified through its new major/minor numbers encoded + in devnum. noload Don't load the journal on mounting. -data=journal All data are committed into the journal prior - to being written into the main file system. +data=journal All data are committed into the journal prior to being + written into the main file system. data=ordered (*) All data are forced directly out to the main file - system prior to its metadata being committed to - the journal. + system prior to its metadata being committed to the + journal. -data=writeback Data ordering is not preserved, data may be - written into the main file system after its - metadata has been committed to the journal. +data=writeback Data ordering is not preserved, data may be written + into the main file system after its metadata has been + committed to the journal. commit=nrsec (*) Ext3 can be told to sync all its data and metadata every 'nrsec' seconds. The default value is 5 seconds. - This means that if you lose your power, you will lose, - as much, the latest 5 seconds of work (your filesystem - will not be damaged though, thanks to journaling). This - default value (or any low value) will hurt performance, - but it's good for data-safety. Setting it to 0 will - have the same effect than leaving the default 5 sec. + This means that if you lose your power, you will lose + as much as the latest 5 seconds of work (your + filesystem will not be damaged though, thanks to the + journaling). This default value (or any low value) + will hurt performance, but it's good for data-safety. + Setting it to 0 will have the same effect as leaving + it at the default (5 seconds). Setting it to very large values will improve performance. -barrier=1 This enables/disables barriers. barrier=0 disables it, - barrier=1 enables it. +barrier=1 This enables/disables barriers. barrier=0 disables + it, barrier=1 enables it. -orlov (*) This enables the new Orlov block allocator. It's enabled - by default. +orlov (*) This enables the new Orlov block allocator. It is + enabled by default. -oldalloc This disables the Orlov block allocator and enables the - old block allocator. Orlov should have better performance, - we'd like to get some feedback if it's the contrary for - you. +oldalloc This disables the Orlov block allocator and enables + the old block allocator. Orlov should have better + performance - we'd like to get some feedback if it's + the contrary for you. -user_xattr Enables Extended User Attributes. Additionally, you need - to have extended attribute support enabled in the kernel - configuration (CONFIG_EXT3_FS_XATTR). See the attr(5) - manual page and http://acl.bestbits.at to learn more - about extended attributes. +user_xattr Enables Extended User Attributes. Additionally, you + need to have extended attribute support enabled in the + kernel configuration (CONFIG_EXT3_FS_XATTR). See the + attr(5) manual page and http://acl.bestbits.at/ to + learn more about extended attributes. nouser_xattr Disables Extended User Attributes. -acl Enables POSIX Access Control Lists support. Additionally, - you need to have ACL support enabled in the kernel - configuration (CONFIG_EXT3_FS_POSIX_ACL). See the acl(5) - manual page and http://acl.bestbits.at for more - information. +acl Enables POSIX Access Control Lists support. + Additionally, you need to have ACL support enabled in + the kernel configuration (CONFIG_EXT3_FS_POSIX_ACL). + See the acl(5) manual page and http://acl.bestbits.at/ + for more information. -noacl This option disables POSIX Access Control List support. +noacl This option disables POSIX Access Control List + support. reservation @@ -88,7 +90,7 @@ bsddf (*) Make 'df' act like BSD. minixdf Make 'df' act like Minix. check=none Don't do extra checking of bitmaps on mount. -nocheck +nocheck debug Extra debugging information is sent to syslog. @@ -97,7 +99,7 @@ errors=continue Keep going on a filesystem error. errors=panic Panic and halt the machine if an error occurs. grpid Give objects the same group ID as their creator. -bsdgroups +bsdgroups nogrpid (*) New objects have the group ID of their creator. sysvgroups @@ -108,81 +110,81 @@ resuid=n The user ID which may use the reserved blocks. sb=n Use alternate superblock at this location. -quota Quota options are currently silently ignored. -noquota (see fs/ext3/super.c, line 594) +quota +noquota grpquota usrquota Specification ============= -ext3 shares all disk implementation with ext2 filesystem, and add -transactions capabilities to ext2. Journaling is done by the -Journaling block device layer. +Ext3 shares all disk implementation with the ext2 filesystem, and adds +transactions capabilities to ext2. Journaling is done by the Journaling Block +Device layer. Journaling Block Device layer ----------------------------- -The Journaling Block Device layer (JBD) isn't ext3 specific. It was -design to add journaling capabilities on a block device. The ext3 -filesystem code will inform the JBD of modifications it is performing -(Call a transaction). the journal support the transactions start and -stop, and in case of crash, the journal can replayed the transactions -to put the partition on a consistent state fastly. +The Journaling Block Device layer (JBD) isn't ext3 specific. It was design to +add journaling capabilities on a block device. The ext3 filesystem code will +inform the JBD of modifications it is performing (called a transaction). The +journal supports the transactions start and stop, and in case of crash, the +journal can replayed the transactions to put the partition back in a +consistent state fast. -handles represent a single atomic update to a filesystem. JBD can -handle external journal on a block device. +Handles represent a single atomic update to a filesystem. JBD can handle an +external journal on a block device. Data Mode --------- -There's 3 different data modes: +There are 3 different data modes: * writeback mode -In data=writeback mode, ext3 does not journal data at all. This mode -provides a similar level of journaling as XFS, JFS, and ReiserFS in its -default mode - metadata journaling. A crash+recovery can cause -incorrect data to appear in files which were written shortly before the -crash. This mode will typically provide the best ext3 performance. +In data=writeback mode, ext3 does not journal data at all. This mode provides +a similar level of journaling as that of XFS, JFS, and ReiserFS in its default +mode - metadata journaling. A crash+recovery can cause incorrect data to +appear in files which were written shortly before the crash. This mode will +typically provide the best ext3 performance. * ordered mode -In data=ordered mode, ext3 only officially journals metadata, but it -logically groups metadata and data blocks into a single unit called a -transaction. When it's time to write the new metadata out to disk, the -associated data blocks are written first. In general, this mode -perform slightly slower than writeback but significantly faster than -journal mode. +In data=ordered mode, ext3 only officially journals metadata, but it logically +groups metadata and data blocks into a single unit called a transaction. When +it's time to write the new metadata out to disk, the associated data blocks +are written first. In general, this mode performs slightly slower than +writeback but significantly faster than journal mode. * journal mode -data=journal mode provides full data and metadata journaling. All new -data is written to the journal first, and then to its final location. -In the event of a crash, the journal can be replayed, bringing both -data and metadata into a consistent state. This mode is the slowest -except when data needs to be read from and written to disk at the same -time where it outperform all others mode. +data=journal mode provides full data and metadata journaling. All new data is +written to the journal first, and then to its final location. +In the event of a crash, the journal can be replayed, bringing both data and +metadata into a consistent state. This mode is the slowest except when data +needs to be read from and written to disk at the same time where it +outperforms all others modes. Compatibility ------------- Ext2 partitions can be easily convert to ext3, with `tune2fs -j `. -Ext3 is fully compatible with Ext2. Ext3 partitions can easily be -mounted as Ext2. +Ext3 is fully compatible with Ext2. Ext3 partitions can easily be mounted as +Ext2. + External Tools ============== -see manual pages to know more. +See manual pages to learn more. + +tune2fs: create a ext3 journal on a ext2 partition with the -j flag. +mke2fs: create a ext3 partition with the -j flag. +debugfs: ext2 and ext3 file system debugger. -tune2fs: create a ext3 journal on a ext2 partition with the -j flags -mke2fs: create a ext3 partition with the -j flags -debugfs: ext2 and ext3 file system debugger References ========== -kernel source: file:/usr/src/linux/fs/ext3 - file:/usr/src/linux/fs/jbd +kernel source: + -programs: http://e2fsprogs.sourceforge.net +programs: http://e2fsprogs.sourceforge.net/ -useful link: - http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html +useful links: http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html http://www-106.ibm.com/developerworks/linux/library/l-fs7/ http://www-106.ibm.com/developerworks/linux/library/l-fs8/