From: Jose Alberto Reguero <jareguero@telefonica.net>
Date: Thu, 13 Mar 2008 22:22:24 +0000 (+0100)
Subject: ahci: Add Marvell 6121 SATA support
X-Git-Tag: v2.6.25-rc7~113^2
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c40e7cb89f9d36924131ef708ff1f16a76611add;p=linux-2.6-omap-h63xx.git

ahci: Add Marvell 6121 SATA support

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index bbfccdbba3a..17ee6ed985d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -591,6 +591,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 
 	/* Marvell */
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
+	{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },	/* 6121 */
 
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -665,6 +666,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 	void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
 	u32 cap, port_map;
 	int i;
+	int mv;
 
 	/* make sure AHCI mode is enabled before accessing CAP */
 	ahci_enable_ahci(mmio);
@@ -700,12 +702,16 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 	 * presence register, as bit 4 (counting from 0)
 	 */
 	if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+		if (pdev->device == 0x6121)
+			mv = 0x3;
+		else
+			mv = 0xf;
 		dev_printk(KERN_ERR, &pdev->dev,
 			   "MV_AHCI HACK: port_map %x -> %x\n",
-			   hpriv->port_map,
-			   hpriv->port_map & 0xf);
+			   port_map,
+			   port_map & mv);
 
-		port_map &= 0xf;
+		port_map &= mv;
 	}
 
 	/* cross check port_map and cap.n_ports */
@@ -1172,9 +1178,14 @@ static void ahci_init_controller(struct ata_host *host)
 	int i;
 	void __iomem *port_mmio;
 	u32 tmp;
+	int mv;
 
 	if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
-		port_mmio = __ahci_port_base(host, 4);
+		if (pdev->device == 0x6121)
+			mv = 2;
+		else
+			mv = 4;
+		port_mmio = __ahci_port_base(host, mv);
 
 		writel(0, port_mmio + PORT_IRQ_MASK);