From: Krzysztof Helt Date: Tue, 16 Oct 2007 08:29:54 +0000 (-0700) Subject: s3fb: do not allow incorrect pixclock settings X-Git-Tag: v2.6.24-rc1~847 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c3ca34f90b44049dcde62a8f97554409112bf376;p=linux-2.6-omap-h63xx.git s3fb: do not allow incorrect pixclock settings This patch adds check if selected pixclock is valid (is in the PLL range). Previously, if the pixclock could not be set, the new mode resolution was set but pixclock was not set which led to incorrect timings sent to monitor. [adaplas] Fixed a few misplaced curly braces. Signed-off-by: Krzysztof Helt Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c index a96ac439217..7d53bc23b9c 100644 --- a/drivers/video/s3fb.c +++ b/drivers/video/s3fb.c @@ -400,6 +400,7 @@ static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct s3fb_info *par = info->par; int rv, mem, step; + u16 m, n, r; /* Find appropriate format */ rv = svga_match_format (s3fb_formats, var, NULL); @@ -427,20 +428,26 @@ static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) /* Check whether have enough memory */ mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual; - if (mem > info->screen_size) - { + if (mem > info->screen_size) { printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", info->node, mem >> 10, (unsigned int) (info->screen_size >> 10)); return -EINVAL; } rv = svga_check_timings (&s3_timing_regs, var, info->node); - if (rv < 0) - { + if (rv < 0) { printk(KERN_ERR "fb%d: invalid timings requested\n", info->node); return rv; } + rv = svga_compute_pll(&s3_pll, PICOS2KHZ(var->pixclock), &m, &n, &r, + info->node); + if (rv < 0) { + printk(KERN_ERR "fb%d: invalid pixclock value requested\n", + info->node); + return rv; + } + return 0; }