From: Eilon Greenstein Date: Thu, 12 Feb 2009 08:37:07 +0000 (+0000) Subject: bnx2x: Using the HW 5th lane X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c1b7399027254a45a4036c548c13eb97c7d0d8fa;p=linux-2.6-omap-h63xx.git bnx2x: Using the HW 5th lane This 1G interface (on top of the 4 lanes 10G interface) requires additional setting to work in CL45 Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index f4c699ecfb4..2463de8fe86 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -174,13 +174,34 @@ (_bank + (_addr & 0xf)), \ _val) -static void bnx2x_set_phy_mdio(struct link_params *params) +static void bnx2x_set_serdes_access(struct link_params *params) { struct bnx2x *bp = params->bp; - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + - params->port*0x18, 0); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18, - DEFAULT_PHY_DEV_ADDR); + u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + /* Set Clause 22 */ + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); + udelay(500); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f); + udelay(500); + /* Set Clause 45 */ + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 0); +} +static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags) +{ + struct bnx2x *bp = params->bp; + if (phy_flags & PHY_XGXS_FLAG) { + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + + params->port*0x18, 0); + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18, + DEFAULT_PHY_DEV_ADDR); + } else { + bnx2x_set_serdes_access(params); + + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD + + params->port*0x10, + DEFAULT_PHY_DEV_ADDR); + } } static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits) @@ -520,7 +541,7 @@ static void bnx2x_phy_deassert(struct link_params *params, u8 phy_flags) udelay(500); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - bnx2x_set_phy_mdio(params); + bnx2x_set_phy_mdio(params, phy_flags); } void bnx2x_link_status_update(struct link_params *params, @@ -996,6 +1017,8 @@ static u8 bnx2x_reset_unicore(struct link_params *params) (mii_control | MDIO_COMBO_IEEO_MII_CONTROL_RESET)); + bnx2x_set_serdes_access(params); + /* wait for the reset to self clear */ for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) { udelay(5); diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index b6c924934a0..d3086e92470 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1815,6 +1815,10 @@ #define NIG_REG_PRS_EOP_OUT_EN 0x10104 /* [RW 1] Input enable for RX parser request IF */ #define NIG_REG_PRS_REQ_IN_EN 0x100b8 +/* [RW 5] control to serdes - CL45 DEVAD */ +#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370 +/* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */ #define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374 /* [R 1] status from serdes0 that inputs to interrupt logic of link status */