From: Anton Vorontsov Date: Tue, 8 Jul 2008 17:36:32 +0000 (+0400) Subject: powerpc/83xx: fix ULPI setup for MPC8315 processors X-Git-Tag: v2.6.27-rc1~865^2~42 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=c0a2015965d42f58d3b50c59bd139bc2419bc7f9;p=linux-2.6-omap-h63xx.git powerpc/83xx: fix ULPI setup for MPC8315 processors We must not use MPC831X_SICR[HL]_* definitions for the MPC8315 processors, because SICR USB bits locations are not compatible with MPC8313. This patch fixes ULPI workability on MPC8315E-RDB boards. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 393dfecdbf5..2a7cbabb410 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -26,6 +26,8 @@ #define MPC834X_SICRL_USB1 0x20000000 #define MPC831X_SICRL_USB_MASK 0x00000c00 #define MPC831X_SICRL_USB_ULPI 0x00000800 +#define MPC8315_SICRL_USB_MASK 0x000000fc +#define MPC8315_SICRL_USB_ULPI 0x00000054 #define MPC837X_SICRL_USB_MASK 0xf0000000 #define MPC837X_SICRL_USB_ULPI 0x50000000 @@ -34,6 +36,8 @@ #define MPC834X_SICRH_USB_UTMI 0x00020000 #define MPC831X_SICRH_USB_MASK 0x000000e0 #define MPC831X_SICRH_USB_ULPI 0x000000a0 +#define MPC8315_SICRH_USB_MASK 0x0000ff00 +#define MPC8315_SICRH_USB_ULPI 0x00000000 /* USB Control Register */ #define FSL_USB2_CONTROL_OFFS 0x500 diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 64bcf0a33c7..cc99c280aad 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void) /* Configure pin mux for ULPI. There is no pin mux for UTMI */ if (prop && !strcmp(prop, "ulpi")) { - temp = in_be32(immap + MPC83XX_SICRL_OFFS); - temp &= ~MPC831X_SICRL_USB_MASK; - temp |= MPC831X_SICRL_USB_ULPI; - out_be32(immap + MPC83XX_SICRL_OFFS, temp); - - temp = in_be32(immap + MPC83XX_SICRH_OFFS); - temp &= ~MPC831X_SICRH_USB_MASK; - temp |= MPC831X_SICRH_USB_ULPI; - out_be32(immap + MPC83XX_SICRH_OFFS, temp); + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC8315_SICRL_USB_MASK, + MPC8315_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8315_SICRH_USB_MASK, + MPC8315_SICRH_USB_ULPI); + } else { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC831X_SICRL_USB_MASK, + MPC831X_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC831X_SICRH_USB_MASK, + MPC831X_SICRH_USB_ULPI); + } } iounmap(immap);