From: Gregory CLEMENT Date: Wed, 19 Dec 2007 17:23:44 +0000 (+0100) Subject: MACB: clear transmit buffers properly on transmit underrun X-Git-Tag: v2.6.24-rc7~40^2 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=bdcba1511b98f2e728b3a910b8771a0d3fce5bf3;p=linux-2.6-omap-h63xx.git MACB: clear transmit buffers properly on transmit underrun Initially transmit buffer pointers were only reset. But buffer descriptors were possibly still set as ready, and buffer in upper layer was not freed. This caused driver hang under big load. Now reset clean properly the buffer descriptor and freed upper layer. Signed-off-by: Gregory CLEMENT Signed-off-by: Haavard Skinnemoen Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 047ea7be485..e10528ed908 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -307,8 +307,31 @@ static void macb_tx(struct macb *bp) (unsigned long)status); if (status & MACB_BIT(UND)) { + int i; printk(KERN_ERR "%s: TX underrun, resetting buffers\n", - bp->dev->name); + bp->dev->name); + + head = bp->tx_head; + + /*Mark all the buffer as used to avoid sending a lost buffer*/ + for (i = 0; i < TX_RING_SIZE; i++) + bp->tx_ring[i].ctrl = MACB_BIT(TX_USED); + + /* free transmit buffer in upper layer*/ + for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) { + struct ring_info *rp = &bp->tx_skb[tail]; + struct sk_buff *skb = rp->skb; + + BUG_ON(skb == NULL); + + rmb(); + + dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len, + DMA_TO_DEVICE); + rp->skb = NULL; + dev_kfree_skb_irq(skb); + } + bp->tx_head = bp->tx_tail = 0; }