From: Daniel Mack Date: Tue, 31 Mar 2009 22:24:33 +0000 (-0700) Subject: lis3: SPI transport layer X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=bb233fdfc7b7cefe45bfa2e8d1b24e79c60a48e5;p=linux-2.6-omap-h63xx.git lis3: SPI transport layer Make use of the new abstraction layer and add a new transport layer for spi. Works fine on a PXA based board. Signed-off-by: Daniel Mack Acked-by: Pavel Machek Acked-by: Eric Piel Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index bc6810c22dd..ce52bf2f235 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -932,6 +932,22 @@ config SENSORS_LIS3LV02D Say Y here if you have an applicable laptop and want to experience the awesome power of lis3lv02d. +config SENSORS_LIS3_SPI + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" + depends on !ACPI && SPI_MASTER && INPUT + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via SPI. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the SPI transport + is called lis3lv02d_spi. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 4da261d16ab..3a6b1f06f8f 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o +obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c new file mode 100644 index 00000000000..07ae74b0e19 --- /dev/null +++ b/drivers/hwmon/lis3lv02d_spi.c @@ -0,0 +1,114 @@ +/* + * lis3lv02d_spi - SPI glue layer for lis3lv02d + * + * Copyright (c) 2009 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_spi" +#define LIS3_SPI_READ 0x80 + +static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct spi_device *spi = lis3->bus_priv; + int ret = spi_w8r8(spi, reg | LIS3_SPI_READ); + if (ret < 0) + return -EINVAL; + + *v = (u8) ret; + return 0; +} + +static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val) +{ + u8 tmp[2] = { reg, val }; + struct spi_device *spi = lis3->bus_priv; + return spi_write(spi, tmp, sizeof(tmp)); +} + +static int lis3_spi_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0; + return lis3->write(lis3, CTRL_REG1, reg); +} + +static struct axis_conversion lis3lv02d_axis_normal = { 1, 2, 3 }; + +static int __devinit lis302dl_spi_probe(struct spi_device *spi) +{ + int ret; + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + ret = spi_setup(spi); + if (ret < 0) + return ret; + + lis3_dev.bus_priv = spi; + lis3_dev.init = lis3_spi_init; + lis3_dev.read = lis3_spi_read; + lis3_dev.write = lis3_spi_write; + lis3_dev.irq = spi->irq; + lis3_dev.ac = lis3lv02d_axis_normal; + spi_set_drvdata(spi, &lis3_dev); + + ret = lis3lv02d_init_device(&lis3_dev); + return ret; +} + +static int __devexit lis302dl_spi_remove(struct spi_device *spi) +{ + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(lis3); + return 0; +} + +static struct spi_driver lis302dl_spi_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = lis302dl_spi_probe, + .remove = __devexit_p(lis302dl_spi_remove), +}; + +static int __init lis302dl_init(void) +{ + return spi_register_driver(&lis302dl_spi_driver); +} + +static void __exit lis302dl_exit(void) +{ + spi_unregister_driver(&lis302dl_spi_driver); +} + +module_init(lis302dl_init); +module_exit(lis302dl_exit); + +MODULE_AUTHOR("Daniel Mack "); +MODULE_DESCRIPTION("lis3lv02d SPI glue layer"); +MODULE_LICENSE("GPL"); +