From: Guennadi Liakhovetski <lg@denx.de>
Date: Tue, 11 Nov 2008 14:12:00 +0000 (+0100)
Subject: [ARM] pcm037: add support for the on-board LAN9217 network controller
X-Git-Tag: v2.6.29-rc1~559^2~11^2~21
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=ba54b95899838610c8c23fb7ab88831016b81fb3;p=linux-2.6-omap-h63xx.git

[ARM] pcm037: add support for the on-board LAN9217 network controller

smc911x now also supports LAN921{5,7,8} network controllers.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 8cd1fdf1897..1707096d362 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -22,6 +22,9 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -59,8 +62,37 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= CS1_BASE_ADDR + 0x300,
+		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_32BIT,
+	.irq_flags	= IRQF_SHARED | IRQF_TRIGGER_LOW,
+};
+
+static struct platform_device pcm037_eth = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
+	&pcm037_eth,
 };
 
 /*
@@ -84,6 +116,11 @@ static void __init mxc_board_init(void)
 
 	mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
 	mxc_register_device(&mxc_w1_master_device, NULL);
+
+	/* SMSC9215 IRQ pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+		gpio_direction_input(MX31_PIN_GPIO3_1);
 }
 
 /*