From: Thierry Vignaud Date: Wed, 11 Feb 2009 21:31:05 +0000 (-0800) Subject: usb: kill prehistorical comments about USB_EHCI_HCD X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=b967c88ed1b48bc353ea83e0cacb2249a3bb1a51;p=linux-2.6-omap-h63xx.git usb: kill prehistorical comments about USB_EHCI_HCD Remove old comments about USB_EHCI_HCD. Cc: Alan Stern Signed-off-by: Andrew Morton Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2c63bfb1f8d..c1cfed7eefb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -24,10 +24,7 @@ config USB_EHCI_HCD The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. If your USB host controller supports USB 2.0, you will likely want to - configure this Host Controller Driver. At the time of this writing, - the primary implementation of EHCI is a chip from NEC, widely available - in add-on PCI cards, but implementations are in the works from other - vendors including Intel and Philips. Motherboard support is appearing. + configure this Host Controller Driver. EHCI controllers are packaged with "companion" host controllers (OHCI or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports