From: Kumar Gala Date: Wed, 22 Jun 2005 00:15:21 +0000 (-0700) Subject: [PATCH] ppc32: Converted MPC10X bridge to use platform devices instead of OCP X-Git-Tag: v2.6.13-rc4~130^2~202^2~121 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=b264c3527930ca4812fefc505fde9ad99d8a0117;p=linux-2.6-omap-h63xx.git [PATCH] ppc32: Converted MPC10X bridge to use platform devices instead of OCP Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to used the standard platform device model. Signed-off-by: Matt McClintock Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 54ce6da2264..10162b187bc 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -826,11 +826,6 @@ config MPC10X_BRIDGE depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT default y -config FSL_OCP - bool - depends on MPC10X_BRIDGE - default y - config MPC10X_OPENPIC bool depends on POWERPMC250 || LOPEC || SANDPOINT diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 5c20266e3b1..c344c66e68f 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -41,7 +41,7 @@ #include #include -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) #include #endif @@ -249,7 +249,7 @@ int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "bogomips\t: %lu.%02lu\n", lpj / (500000/HZ), (lpj / (5000/HZ)) % 100); -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) if (cur_ppc_sys_spec->ppc_sys_name) seq_printf(m, "chipset\t\t: %s\n", cur_ppc_sys_spec->ppc_sys_name); diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 6e7ecbc59aa..dec5bf4f687 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -92,7 +92,7 @@ ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y) obj-$(CONFIG_SERIAL_TEXT_DEBUG) += mv64x60_dbg.o endif obj-$(CONFIG_BOOTX_TEXT) += btext.o -obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o +obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o ppc_sys.o obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_BOOKE) += dcr.o diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index fd93adfd464..0130aeb4a2d 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -21,6 +21,9 @@ #include #include #include +#include +#include +#include #include #include @@ -30,16 +33,7 @@ #include #include #include -#include - -/* The OCP structure is fixed by code below, before OCP initialises. - paddr depends on where the board places the EUMB. - - fixed in mpc10x_bridge_init(). - irq depends on two things: - > does the board use the EPIC at all? (PCORE does not). - > is the EPIC in serial or parallel mode? - - fixed in mpc10x_set_openpic(). -*/ +#include #ifdef CONFIG_MPC10X_OPENPIC #ifdef CONFIG_EPIC_SERIAL_MODE @@ -51,34 +45,127 @@ #define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS) #define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS) #else -#define MPC10X_I2C_IRQ OCP_IRQ_NA -#define MPC10X_DMA0_IRQ OCP_IRQ_NA -#define MPC10X_DMA1_IRQ OCP_IRQ_NA +#define MPC10X_I2C_IRQ -1 +#define MPC10X_DMA0_IRQ -1 +#define MPC10X_DMA1_IRQ -1 #endif - -struct ocp_def core_ocp[] = { - { .vendor = OCP_VENDOR_INVALID - } +static struct fsl_i2c_platform_data mpc10x_i2c_pdata = { + .device_flags = 0, }; -static struct ocp_fs_i2c_data mpc10x_i2c_data = { - .flags = 0 +static struct plat_serial8250_port serial_platform_data[] = { + { }, }; -static struct ocp_def mpc10x_i2c_ocp = { - .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_IIC, - .index = 0, - .additions = &mpc10x_i2c_data + +struct platform_device ppc_sys_platform_devices[] = { + [MPC10X_IIC1] = { + .name = "fsl-i2c", + .id = 1, + .dev.platform_data = &mpc10x_i2c_pdata, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_I2C_OFFSET, + .end = MPC10X_EUMB_I2C_OFFSET + + MPC10X_EUMB_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ + }, + }, + }, + [MPC10X_DMA0] = { + .name = "fsl-dma", + .id = 0, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x10, + .end = MPC10X_EUMB_DMA_OFFSET + 0x1f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DUART] = { + .name = "serial8250", + .id = 0, + .dev.platform_data = serial_platform_data, + }, }; -static struct ocp_def mpc10x_dma_ocp[2] = { -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 0 }, -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 1 } +/* We use the PCI ID to match on */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + .ppc_sys_name = "8245", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8245, + .num_devices = 4, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART, + }, + }, + { + .ppc_sys_name = "8240", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8240, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { + .ppc_sys_name = "107", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_107, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { /* default match */ + .ppc_sys_name = "", + .mask = 0x00000000, + .value = 0x00000000, + }, }; /* Set resources to match bridge memory map */ @@ -132,7 +219,7 @@ mpc10x_bridge_init(struct pci_controller *hose, uint new_map, uint phys_eumb_base) { - int host_bridge, picr1, picr1_bit; + int host_bridge, picr1, picr1_bit, i; ulong pci_config_addr, pci_config_data; u_char pir, byte; @@ -273,7 +360,7 @@ mpc10x_bridge_init(struct pci_controller *hose, printk("Host bridge in Agent mode\n"); /* Read or Set LMBAR & PCSRBAR? */ } - + /* Set base addr of the 8240/107 EUMB. */ early_write_config_dword(hose, 0, @@ -287,17 +374,6 @@ mpc10x_bridge_init(struct pci_controller *hose, ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET, MPC10X_EUMB_EPIC_SIZE); #endif - mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET; - mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ; - ocp_add_one_device(&mpc10x_i2c_ocp); - mpc10x_dma_ocp[0].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x100; - mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[0]); - mpc10x_dma_ocp[1].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x200; - mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[1]); } #ifdef CONFIG_MPC10X_STORE_GATHERING @@ -306,6 +382,23 @@ mpc10x_bridge_init(struct pci_controller *hose, mpc10x_disable_store_gathering(hose); #endif + /* setup platform devices for MPC10x bridges */ + identify_ppc_sys_by_id (host_bridge); + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + unsigned int dev_id = cur_ppc_sys_spec->device_list[i]; + ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id], + phys_eumb_base); + } + + /* IRQ's are determined at runtime */ + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ; + /* * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative * PCI reads may return stale data so turn off. @@ -330,7 +423,7 @@ mpc10x_bridge_init(struct pci_controller *hose, * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd. */ if (host_bridge == MPC10X_BRIDGE_8245) { - ulong picr2; + u32 picr2; early_read_config_dword(hose, 0, PCI_DEVFN(0,0), MPC10X_CFG_PICR2_REG, &picr2); diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h index d8e7e2d6128..f5196a4efbe 100644 --- a/include/asm-ppc/mpc10x.h +++ b/include/asm-ppc/mpc10x.h @@ -159,6 +159,12 @@ extern unsigned long ioremap_base; #define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) #define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE +enum ppc_sys_devices { + MPC10X_IIC1, + MPC10X_DMA0, + MPC10X_DMA1, + MPC10X_DUART, +}; int mpc10x_bridge_init(struct pci_controller *hose, uint current_map, diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h index 24b991c4276..8ea62456623 100644 --- a/include/asm-ppc/ppc_sys.h +++ b/include/asm-ppc/ppc_sys.h @@ -27,6 +27,8 @@ #include #elif defined(CONFIG_PPC_MPC52xx) #include +#elif defined(CONFIG_MPC10X_BRIDGE) +#include #else #error "need definition of ppc_sys_devices" #endif