From: Andy Fleming <afleming@freescale.com>
Date: Wed, 11 Jul 2007 16:42:35 +0000 (-0500)
Subject: Fix Vitesse RGMII-ID support
X-Git-Tag: v2.6.23-rc1~477^2~9
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=af2d940df2b60b15c271033d381c2f3ead655562;p=linux-2.6-omap-h63xx.git

Fix Vitesse RGMII-ID support

The Vitesse PHY on the 8641D needs to be set up with internal delay to
work in RGMII mode.  So we add skew when it is set to RGMII_ID mode.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Haruki Dai <Dai.Haruki@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
---

diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index f39ab76e6f6..6a538564791 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -21,6 +21,10 @@
 /* Vitesse Extended Control Register 1 */
 #define MII_VSC8244_EXT_CON1           0x17
 #define MII_VSC8244_EXTCON1_INIT       0x0000
+#define MII_VSC8244_EXTCON1_TX_SKEW_MASK	0x0c00
+#define MII_VSC8244_EXTCON1_RX_SKEW_MASK	0x0300
+#define MII_VSC8244_EXTCON1_TX_SKEW	0x0800
+#define MII_VSC8244_EXTCON1_RX_SKEW	0x0200
 
 /* Vitesse Interrupt Mask Register */
 #define MII_VSC8244_IMASK		0x19
@@ -39,7 +43,7 @@
 
 /* Vitesse Auxiliary Control/Status Register */
 #define MII_VSC8244_AUX_CONSTAT        	0x1c
-#define MII_VSC8244_AUXCONSTAT_INIT    	0x0004
+#define MII_VSC8244_AUXCONSTAT_INIT    	0x0000
 #define MII_VSC8244_AUXCONSTAT_DUPLEX  	0x0020
 #define MII_VSC8244_AUXCONSTAT_SPEED   	0x0018
 #define MII_VSC8244_AUXCONSTAT_GBIT    	0x0010
@@ -51,6 +55,7 @@ MODULE_LICENSE("GPL");
 
 static int vsc824x_config_init(struct phy_device *phydev)
 {
+	int extcon;
 	int err;
 
 	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
@@ -58,8 +63,20 @@ static int vsc824x_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	err = phy_write(phydev, MII_VSC8244_EXT_CON1,
-			MII_VSC8244_EXTCON1_INIT);
+	extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
+
+	if (extcon < 0)
+		return err;
+
+	extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
+			MII_VSC8244_EXTCON1_RX_SKEW_MASK);
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+		extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
+				MII_VSC8244_EXTCON1_RX_SKEW);
+
+	err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
+
 	return err;
 }