From: Andres Salomon Date: Mon, 28 Apr 2008 09:15:26 +0000 (-0700) Subject: lxfb: rearrange/rename MSR bitfields X-Git-Tag: v2.6.26-rc1~800 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=aec40532c4d1183fa1ec415bb7dae08e19fc6b01;p=linux-2.6-omap-h63xx.git lxfb: rearrange/rename MSR bitfields Finally, move the MSR bitfields around in lxfb.h, and rename them. Alas, most of that crap appears to be undocumented. Signed-off-by: Andres Salomon Cc: "Antonino A. Daplas" Cc: Jordan Crouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h index 0e3cb919100..b3fbc56ccbd 100644 --- a/drivers/video/geode/lxfb.h +++ b/drivers/video/geode/lxfb.h @@ -27,31 +27,6 @@ int lx_blank_display(struct fb_info *, int); void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int, unsigned int, unsigned int); -/* MSRS */ - -#define GLCP_DOTPLL_RESET (1 << 0) -#define GLCP_DOTPLL_BYPASS (1 << 15) -#define GLCP_DOTPLL_HALFPIX (1 << 24) -#define GLCP_DOTPLL_LOCK (1 << 25) - -#define DF_CONFIG_OUTPUT_MASK 0x38 -#define DF_OUTPUT_PANEL 0x08 -#define DF_OUTPUT_CRT 0x00 -#define DF_SIMULTANEOUS_CRT_AND_FP (1 << 15) - -#define DF_DEFAULT_TFT_PAD_SEL_LOW 0xDFFFFFFF -#define DF_DEFAULT_TFT_PAD_SEL_HIGH 0x0000003F - -#define DC_SPARE_DISABLE_CFIFO_HGO 0x00000800 -#define DC_SPARE_VFIFO_ARB_SELECT 0x00000400 -#define DC_SPARE_WM_LPEN_OVRD 0x00000200 -#define DC_SPARE_LOAD_WM_LPEN_MASK 0x00000100 -#define DC_SPARE_DISABLE_INIT_VID_PRI 0x00000080 -#define DC_SPARE_DISABLE_VFIFO_WM 0x00000040 -#define DC_SPARE_DISABLE_CWD_CHECK 0x00000020 -#define DC_SPARE_PIX8_PAN_FIX 0x00000010 -#define DC_SPARE_FIRST_REQ_MASK 0x00000002 - /* Graphics Processor registers (table 6-29 from the data book) */ enum gp_registers { @@ -390,4 +365,31 @@ static inline void write_fp(struct lxfb_par *par, int reg, uint32_t val) writel(val, par->vp_regs + 8*reg + VP_FP_START); } + +/* MSRs are defined in asm/geode.h; their bitfields are here */ + +#define MSR_GLCP_DOTPLL_LOCK (1 << 25) /* r/o */ +#define MSR_GLCP_DOTPLL_HALFPIX (1 << 24) +#define MSR_GLCP_DOTPLL_BYPASS (1 << 15) +#define MSR_GLCP_DOTPLL_DOTRESET (1 << 0) + +/* note: this is actually the VP's GLD_MSR_CONFIG */ +#define MSR_LX_GLD_MSR_CONFIG_FMT ((1 << 3) | (1 << 4) | (1 << 5)) +#define MSR_LX_GLD_MSR_CONFIG_FMT_FP (1 << 3) +#define MSR_LX_GLD_MSR_CONFIG_FMT_CRT (0) +#define MSR_LX_GLD_MSR_CONFIG_FPC (1 << 15) /* FP *and* CRT */ + +#define MSR_LX_MSR_PADSEL_TFT_SEL_LOW 0xDFFFFFFF /* ??? */ +#define MSR_LX_MSR_PADSEL_TFT_SEL_HIGH 0x0000003F /* ??? */ + +#define MSR_LX_SPARE_MSR_DIS_CFIFO_HGO (1 << 11) /* undocumented */ +#define MSR_LX_SPARE_MSR_VFIFO_ARB_SEL (1 << 10) /* undocumented */ +#define MSR_LX_SPARE_MSR_WM_LPEN_OVRD (1 << 9) /* undocumented */ +#define MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M (1 << 8) /* undocumented */ +#define MSR_LX_SPARE_MSR_DIS_INIT_V_PRI (1 << 7) /* undocumented */ +#define MSR_LX_SPARE_MSR_DIS_VIFO_WM (1 << 6) +#define MSR_LX_SPARE_MSR_DIS_CWD_CHECK (1 << 5) /* undocumented */ +#define MSR_LX_SPARE_MSR_PIX8_PAN_FIX (1 << 4) /* undocumented */ +#define MSR_LX_SPARE_MSR_FIRST_REQ_MASK (1 << 1) /* undocumented */ + #endif diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c index 7be6f578e87..a68def88c92 100644 --- a/drivers/video/geode/lxfb_ops.c +++ b/drivers/video/geode/lxfb_ops.c @@ -154,12 +154,12 @@ static void lx_set_dotpll(u32 pllval) rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); - if ((dotpll_lo & GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval)) + if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval)) return; dotpll_hi = pllval; - dotpll_lo &= ~(GLCP_DOTPLL_BYPASS | GLCP_DOTPLL_HALFPIX); - dotpll_lo |= GLCP_DOTPLL_RESET; + dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX); + dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET; wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); @@ -171,13 +171,13 @@ static void lx_set_dotpll(u32 pllval) for (i = 0; i < 1000; i++) { rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); - if (dotpll_lo & GLCP_DOTPLL_LOCK) + if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK) break; } /* Clear the reset bit */ - dotpll_lo &= ~GLCP_DOTPLL_RESET; + dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET; wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); } @@ -299,8 +299,8 @@ static void lx_graphics_enable(struct fb_info *info) write_fp(par, FP_PT2, FP_PT2_SCRC); write_fp(par, FP_DFC, FP_DFC_BC); - msrlo = DF_DEFAULT_TFT_PAD_SEL_LOW; - msrhi = DF_DEFAULT_TFT_PAD_SEL_HIGH; + msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW; + msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH; wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi); } @@ -366,18 +366,17 @@ void lx_set_mode(struct fb_info *info) /* Set output mode */ rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval); - msrval &= ~DF_CONFIG_OUTPUT_MASK; + msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT; if (par->output & OUTPUT_PANEL) { - msrval |= DF_OUTPUT_PANEL; + msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP; if (par->output & OUTPUT_CRT) - msrval |= DF_SIMULTANEOUS_CRT_AND_FP; + msrval |= MSR_LX_GLD_MSR_CONFIG_FPC; else - msrval &= ~DF_SIMULTANEOUS_CRT_AND_FP; - } else { - msrval |= DF_OUTPUT_CRT; - } + msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC; + } else + msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT; wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval); @@ -429,10 +428,12 @@ void lx_set_mode(struct fb_info *info) rdmsrl(MSR_LX_SPARE_MSR, msrval); - msrval &= ~(DC_SPARE_DISABLE_CFIFO_HGO | DC_SPARE_VFIFO_ARB_SELECT | - DC_SPARE_LOAD_WM_LPEN_MASK | DC_SPARE_WM_LPEN_OVRD | - DC_SPARE_DISABLE_INIT_VID_PRI | DC_SPARE_DISABLE_VFIFO_WM); - msrval |= DC_SPARE_DISABLE_VFIFO_WM | DC_SPARE_DISABLE_INIT_VID_PRI; + msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO + | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL + | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M + | MSR_LX_SPARE_MSR_WM_LPEN_OVRD); + msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM | + MSR_LX_SPARE_MSR_DIS_INIT_V_PRI; wrmsrl(MSR_LX_SPARE_MSR, msrval); gcfg = DC_GENERAL_CFG_DFLE; /* Display fifo enable */