From: Greg Kroah-Hartman Date: Thu, 14 Aug 2008 16:37:34 +0000 (-0700) Subject: USB: remove warn() macro from usb media drivers X-Git-Tag: v2.6.28-rc1~254^2~14 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=aa82661baf8a48379355ffa8bf162b07cf487600;p=linux-2.6-omap-h63xx.git USB: remove warn() macro from usb media drivers USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Cc: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 66783fffe4c..78f56944e64 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -310,7 +310,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, radio->curfreq = f->frequency; if (dsbr100_setfreq(radio, radio->curfreq)==-1) - warn("Set frequency failed"); + dev_warn(&radio->usbdev->dev, "Set frequency failed\n"); return 0; } @@ -361,12 +361,14 @@ static int vidioc_s_ctrl(struct file *file, void *priv, case V4L2_CID_AUDIO_MUTE: if (ctrl->value) { if (dsbr100_stop(radio) == -1) { - warn("Radio did not respond properly"); + dev_warn(&radio->usbdev->dev, + "Radio did not respond properly\n"); return -EBUSY; } } else { if (dsbr100_start(radio) == -1) { - warn("Radio did not respond properly"); + dev_warn(&radio->usbdev->dev, + "Radio did not respond properly\n"); return -EBUSY; } } @@ -416,7 +418,8 @@ static int usb_dsbr100_open(struct inode *inode, struct file *file) radio->muted = 1; if (dsbr100_start(radio)<0) { - warn("Radio did not start up properly"); + dev_warn(&radio->usbdev->dev, + "Radio did not start up properly\n"); radio->users = 0; unlock_kernel(); return -EIO; @@ -501,7 +504,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf, radio->curfreq = FREQ_MIN*FREQ_MUL; video_set_drvdata(radio->videodev, radio); if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) { - warn("Could not register video device"); + dev_warn(&intf->dev, "Could not register video device\n"); video_device_release(radio->videodev); kfree(radio->transfer_buffer); kfree(radio); diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 3aa538afcc0..298810d5262 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -192,7 +192,7 @@ static void dabusb_iso_complete (struct urb *purb) err("dabusb_iso_complete: invalid len %d", len); } else - warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status); + dev_warn(&purb->dev->dev, "dabusb_iso_complete: corrupted packet status: %d\n", purb->iso_frame_desc[i].status); if (dst != purb->actual_length) err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length); } @@ -289,7 +289,7 @@ static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb) } if( ret == -EPIPE ) { - warn("CLEAR_FEATURE request to remove STALL condition."); + dev_warn(&s->usbdev->dev, "CLEAR_FEATURE request to remove STALL condition.\n"); if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe))) err("request failed"); } diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index 935d73de57b..210f1240b33 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -1098,9 +1098,10 @@ ov51x_clear_snapshot(struct usb_ov511 *ov) reg_w(ov, R51x_SYS_SNAP, 0x02); reg_w(ov, R51x_SYS_SNAP, 0x00); } else if (ov->bclass == BCL_OV518) { - warn("snapshot reset not supported yet on OV518(+)"); + dev_warn(&ov->dev->dev, + "snapshot reset not supported yet on OV518(+)\n"); } else { - err("clear snap: invalid bridge type"); + dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n"); } } @@ -1115,14 +1116,16 @@ ov51x_check_snapshot(struct usb_ov511 *ov) if (ov->bclass == BCL_OV511) { ret = reg_r(ov, R51x_SYS_SNAP); if (ret < 0) { - err("Error checking snspshot status (%d)", ret); + dev_err(&ov->dev->dev, + "Error checking snspshot status (%d)\n", ret); } else if (ret & 0x08) { status = 1; } } else if (ov->bclass == BCL_OV518) { - warn("snapshot check not supported yet on OV518(+)"); + dev_warn(&ov->dev->dev, + "snapshot check not supported yet on OV518(+)\n"); } else { - err("check snap: invalid bridge type"); + dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n"); } return status; @@ -5217,7 +5220,8 @@ saa7111a_configure(struct usb_ov511 *ov) if (ov->bclass == BCL_OV511) reg_w(ov, 0x11, 0x00); else - warn("SAA7111A not yet supported with OV518/OV518+"); + dev_warn(&ov->dev->dev, + "SAA7111A not yet supported with OV518/OV518+\n"); return 0; } @@ -5456,7 +5460,8 @@ ov518_configure(struct usb_ov511 *ov) * required. OV518 has no uncompressed mode, to save RAM. */ if (!dumppix && !ov->compress) { ov->compress = 1; - warn("Compression required with OV518...enabling"); + dev_warn(&ov->dev->dev, + "Compression required with OV518...enabling\n"); } if (ov->bridge == BRG_OV518) { diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c index e986c28b7bb..da27a528798 100644 --- a/drivers/media/video/usbvideo/konicawc.c +++ b/drivers/media/video/usbvideo/konicawc.c @@ -229,7 +229,8 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev cam->input = input_dev = input_allocate_device(); if (!input_dev) { - warn("Not enough memory for camera's input device\n"); + dev_warn(&dev->dev, + "Not enough memory for camera's input device\n"); return; } @@ -243,8 +244,9 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev error = input_register_device(cam->input); if (error) { - warn("Failed to register camera's input device, err: %d\n", - error); + dev_warn(&dev->dev, + "Failed to register camera's input device, err: %d\n", + error); input_free_device(cam->input); cam->input = NULL; } diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 05c61b52311..4459b8a7f81 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -93,7 +93,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev) cam->input = input_dev = input_allocate_device(); if (!input_dev) { - warn("insufficient mem for cam input device"); + dev_warn(&dev->dev, "insufficient mem for cam input device\n"); return; } @@ -107,8 +107,9 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev) error = input_register_device(cam->input); if (error) { - warn("Failed to register camera's input device, err: %d\n", - error); + dev_warn(&dev->dev, + "Failed to register camera's input device, err: %d\n", + error); input_free_device(cam->input); cam->input = NULL; } @@ -587,8 +588,9 @@ static int qcm_compress_iso(struct uvd *uvd, struct urb *dataurb) dataurb->iso_frame_desc[i].offset; if (st < 0) { - warn("Data error: packet=%d. len=%d. status=%d.", - i, n, st); + dev_warn(&uvd->dev->dev, + "Data error: packet=%d. len=%d. status=%d.\n", + i, n, st); uvd->stats.iso_err_count++; continue; } @@ -699,7 +701,7 @@ static void qcm_stop_data(struct uvd *uvd) ret = qcm_camera_off(uvd); if (ret) - warn("couldn't turn the cam off."); + dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n"); uvd->streaming = 0;