From: Mark Lord Date: Thu, 24 Apr 2008 02:36:25 +0000 (-0400) Subject: libata-eh set tf flags in NCQ EH result_tf X-Git-Tag: v2.6.26-rc1~1060^2~10 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=a6116c9e60978a6deaa20691c67ffed727e50df1;p=linux-2.6-omap-h63xx.git libata-eh set tf flags in NCQ EH result_tf Fix mis-reporting of NCQ errors by ensuring that result_tf->flags is properly initialized in libata-eh. This allows ata_gen_ata_sense() to report the failed block number correctly to SCSI after a media error during NCQ. This patch may also be a candidate for backporting to earlier kernels. Without this fix, SCSI will fail I/O on the entire request rather than just the bad sector. That can be bad for a request that was merged from many independent read reads from different tasks. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index d94359a24d4..61dcd0026c6 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1402,6 +1402,7 @@ static void ata_eh_analyze_ncq_error(struct ata_link *link) /* we've got the perpetrator, condemn it */ qc = __ata_qc_from_tag(ap, tag); memcpy(&qc->result_tf, &tf, sizeof(tf)); + qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48; qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ; ehc->i.err_mask &= ~AC_ERR_DEV; }