From: Matthias Fuchs Date: Tue, 31 Mar 2009 22:24:58 +0000 (-0700) Subject: rtc: add EPSON RX8025 support to DS1307 RTC driver X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=a216685818a54b4f15235068b53908f954850251;p=linux-2.6-omap-h63xx.git rtc: add EPSON RX8025 support to DS1307 RTC driver Add support for the EPSON RX8025 RTC. The date/time registers of this chip are compatible with the DS1307. Signed-off-by: Matthias Fuchs Signed-off-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index d669b916927..09d5cd33a3f 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -129,13 +129,14 @@ comment "I2C RTC drivers" if I2C config RTC_DRV_DS1307 - tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00" + tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025" help If you say yes here you get support for various compatible RTC chips (often with battery backup) connected with I2C. This driver should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00, - and probably other chips. In some cases the RTC must already - have been initialized (by manufacturing or a bootloader). + EPSON RX-8025 and probably other chips. In some cases the RTC + must already have been initialized (by manufacturing or a + bootloader). The first seven registers on these chips hold an RTC, and other registers may add features such as NVRAM, a trickle charger for diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 1c975e6439b..2c4a65302a9 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -3,6 +3,7 @@ * * Copyright (C) 2005 James Chapman (ds1337 core) * Copyright (C) 2006 David Brownell + * Copyright (C) 2009 Matthias Fuchs (rx8025 support) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -31,6 +32,7 @@ enum ds_type { ds_1339, ds_1340, m41t00, + rx_8025, // rs5c372 too? different address... }; @@ -83,6 +85,12 @@ enum ds_type { #define DS1339_REG_ALARM1_SECS 0x07 #define DS1339_REG_TRICKLE 0x10 +#define RX8025_REG_CTRL1 0x0e +# define RX8025_BIT_2412 0x20 +#define RX8025_REG_CTRL2 0x0f +# define RX8025_BIT_PON 0x10 +# define RX8025_BIT_VDET 0x40 +# define RX8025_BIT_XST 0x20 struct ds1307 { @@ -121,6 +129,8 @@ static const struct chip_desc chips[] = { [ds_1340] = { }, [m41t00] = { +}, +[rx_8025] = { }, }; static const struct i2c_device_id ds1307_id[] = { @@ -130,6 +140,7 @@ static const struct i2c_device_id ds1307_id[] = { { "ds1339", ds_1339 }, { "ds1340", ds_1340 }, { "m41t00", m41t00 }, + { "rx8025", rx_8025 }, { } }; MODULE_DEVICE_TABLE(i2c, ds1307_id); @@ -674,6 +685,72 @@ static int __devinit ds1307_probe(struct i2c_client *client, dev_warn(&client->dev, "SET TIME!\n"); } break; + + case rx_8025: + tmp = i2c_smbus_read_i2c_block_data(ds1307->client, + RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); + if (tmp != 2) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + /* oscillator off? turn it on, so clock can tick. */ + if (!(ds1307->regs[1] & RX8025_BIT_XST)) { + ds1307->regs[1] |= RX8025_BIT_XST; + i2c_smbus_write_byte_data(client, + RX8025_REG_CTRL2 << 4 | 0x08, + ds1307->regs[1]); + dev_warn(&client->dev, + "oscillator stop detected - SET TIME!\n"); + } + + if (ds1307->regs[1] & RX8025_BIT_PON) { + ds1307->regs[1] &= ~RX8025_BIT_PON; + i2c_smbus_write_byte_data(client, + RX8025_REG_CTRL2 << 4 | 0x08, + ds1307->regs[1]); + dev_warn(&client->dev, "power-on detected\n"); + } + + if (ds1307->regs[1] & RX8025_BIT_VDET) { + ds1307->regs[1] &= ~RX8025_BIT_VDET; + i2c_smbus_write_byte_data(client, + RX8025_REG_CTRL2 << 4 | 0x08, + ds1307->regs[1]); + dev_warn(&client->dev, "voltage drop detected\n"); + } + + /* make sure we are running in 24hour mode */ + if (!(ds1307->regs[0] & RX8025_BIT_2412)) { + u8 hour; + + /* switch to 24 hour mode */ + i2c_smbus_write_byte_data(client, + RX8025_REG_CTRL1 << 4 | 0x08, + ds1307->regs[0] | + RX8025_BIT_2412); + + tmp = i2c_smbus_read_i2c_block_data(ds1307->client, + RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); + if (tmp != 2) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + /* correct hour */ + hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]); + if (hour == 12) + hour = 0; + if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) + hour += 12; + + i2c_smbus_write_byte_data(client, + DS1307_REG_HOUR << 4 | 0x08, + hour); + } + break; default: break; } @@ -734,6 +811,7 @@ read_rtc: dev_warn(&client->dev, "SET TIME!\n"); } break; + case rx_8025: case ds_1337: case ds_1339: break; @@ -747,6 +825,8 @@ read_rtc: * systems that will run through year 2100. */ break; + case rx_8025: + break; default: if (!(tmp & DS1307_BIT_12HR)) break;