From: Matt Porter Date: Wed, 22 Jun 2005 00:15:22 +0000 (-0700) Subject: [PATCH] cpm_uart: Route SCC2 pins for the STx GP3 board X-Git-Tag: v2.6.13-rc4~130^2~202^2~120 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=a1604f9121ee97b27d5ce308ddd4b70c3a220279;p=linux-2.6-omap-h63xx.git [PATCH] cpm_uart: Route SCC2 pins for the STx GP3 board Adds SCC2 pin routing specific to the GP3 board. Signed-off-by: Matt Porter Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index b422c3abfba..c4c8f4b44f5 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -134,12 +134,21 @@ void scc1_lineif(struct uart_cpm_port *pinfo) void scc2_lineif(struct uart_cpm_port *pinfo) { + /* + * STx GP3 uses the SCC2 secondary option pin assignment + * which this driver doesn't account for in the static + * pin assignments. This kind of board specific info + * really has to get out of the driver so boards can + * be supported in a sane fashion. + */ +#ifndef CONFIG_STX_GP3 volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; io->iop_psorb |= 0x00880000; io->iop_pdirb &= ~0x00030000; io->iop_psorb &= ~0x00030000; +#endif cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff; cpm2_immr->im_cpmux.cmx_scr |= 0x00090000; pinfo->brg = 2;