From: Bob Moore Date: Wed, 12 Nov 2008 08:01:56 +0000 (+0800) Subject: ACPICA: Reformat comments, no functional changes X-Git-Tag: v2.6.29-rc1~34^2~47 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=9f15fc666ef54afc7aff31dfa31edecf00e0d81a;p=linux-2.6-omap-h63xx.git ACPICA: Reformat comments, no functional changes Reformat comments to use fewer lines. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- diff --git a/drivers/acpi/events/evevent.c b/drivers/acpi/events/evevent.c index c56c5c6ea77..6ddf938290f 100644 --- a/drivers/acpi/events/evevent.c +++ b/drivers/acpi/events/evevent.c @@ -72,8 +72,8 @@ acpi_status acpi_ev_initialize_events(void) /* * Initialize the Fixed and General Purpose Events. This is done prior to - * enabling SCIs to prevent interrupts from occurring before the handlers are - * installed. + * enabling SCIs to prevent interrupts from occurring before the handlers + * are installed. */ status = acpi_ev_fixed_event_initialize(); if (ACPI_FAILURE(status)) { @@ -192,8 +192,8 @@ static acpi_status acpi_ev_fixed_event_initialize(void) acpi_status status; /* - * Initialize the structure that keeps track of fixed event handlers - * and enable the fixed events. + * Initialize the structure that keeps track of fixed event handlers and + * enable the fixed events. */ for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) { acpi_gbl_fixed_event_handlers[i].handler = NULL; @@ -237,7 +237,7 @@ u32 acpi_ev_fixed_event_detect(void) /* * Read the fixed feature status and enable registers, as all the cases - * depend on their values. Ignore errors here. + * depend on their values. Ignore errors here. */ (void)acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS, &fixed_status); (void)acpi_hw_register_read(ACPI_REGISTER_PM1_ENABLE, &fixed_enable); @@ -291,8 +291,8 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event) status_register_id, 1); /* - * Make sure we've got a handler. If not, report an error. - * The event is disabled to prevent further interrupts. + * Make sure we've got a handler. If not, report an error. The event is + * disabled to prevent further interrupts. */ if (NULL == acpi_gbl_fixed_event_handlers[event].handler) { (void)acpi_set_register(acpi_gbl_fixed_event_info[event]. diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index f45c74fe745..12b49d312ad 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -125,7 +125,7 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, (1 << (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number)); - /* 1) Disable case. Simply clear all enable bits */ + /* 1) Disable case. Simply clear all enable bits */ if (type == ACPI_GPE_DISABLE) { ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, @@ -134,7 +134,7 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, return_ACPI_STATUS(AE_OK); } - /* 2) Enable case. Set/Clear the appropriate enable bits */ + /* 2) Enable case. Set/Clear the appropriate enable bits */ switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) { case ACPI_GPE_TYPE_WAKE: @@ -295,7 +295,7 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) * * FUNCTION: acpi_ev_get_gpe_event_info * - * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1 + * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1 * gpe_number - Raw GPE number * * RETURN: A GPE event_info struct. NULL if not a valid GPE @@ -372,7 +372,7 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, * * RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED * - * DESCRIPTION: Detect if any GP events have occurred. This function is + * DESCRIPTION: Detect if any GP events have occurred. This function is * executed at interrupt level. * ******************************************************************************/ @@ -400,8 +400,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) /* * We need to obtain the GPE lock for both the data structs and registers - * Note: Not necessary to obtain the hardware lock, since the GPE registers - * are owned by the gpe_lock. + * Note: Not necessary to obtain the hardware lock, since the GPE + * registers are owned by the gpe_lock. */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); @@ -410,9 +410,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) gpe_block = gpe_xrupt_list->gpe_block_list_head; while (gpe_block) { /* - * Read all of the 8-bit GPE status and enable registers - * in this GPE block, saving all of them. - * Find all currently active GP events. + * Read all of the 8-bit GPE status and enable registers in this GPE + * block, saving all of them. Find all currently active GP events. */ for (i = 0; i < gpe_block->register_count; i++) { @@ -527,8 +526,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) (void)acpi_ev_enable_gpe(gpe_event_info, FALSE); /* - * Take a snapshot of the GPE info for this level - we copy the - * info to prevent a race condition with remove_handler/remove_block. + * Take a snapshot of the GPE info for this level - we copy the info to + * prevent a race condition with remove_handler/remove_block. */ ACPI_MEMCPY(&local_gpe_event_info, gpe_event_info, sizeof(struct acpi_gpe_event_info)); @@ -539,8 +538,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) } /* - * Must check for control method type dispatch one more - * time to avoid race with ev_gpe_install_handler + * Must check for control method type dispatch one more time to avoid a + * race with ev_gpe_install_handler */ if ((local_gpe_event_info.flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_METHOD) { @@ -584,8 +583,8 @@ static void acpi_ev_asynch_enable_gpe(void *context) if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) { /* - * GPE is level-triggered, we clear the GPE status bit after - * handling the event. + * GPE is level-triggered, we clear the GPE status bit after handling + * the event. */ status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { @@ -624,7 +623,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) acpi_os_gpe_count(gpe_number); /* - * If edge-triggered, clear the GPE status bit now. Note that + * If edge-triggered, clear the GPE status bit now. Note that * level-triggered events are cleared after the GPE is serviced. */ if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == @@ -650,7 +649,8 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) /* * Invoke the installed handler (at interrupt level) - * Ignore return status for now. TBD: leave GPE disabled on error? + * Ignore return status for now. + * TBD: leave GPE disabled on error? */ (void)gpe_event_info->dispatch.handler->address(gpe_event_info-> dispatch. @@ -708,7 +708,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) gpe_number)); /* - * Disable the GPE. The GPE will remain disabled until the ACPI + * Disable the GPE. The GPE will remain disabled until the ACPICA * Core Subsystem is restarted, or a handler is installed. */ status = acpi_ev_disable_gpe(gpe_event_info); diff --git a/drivers/acpi/events/evgpeblk.c b/drivers/acpi/events/evgpeblk.c index 73c058e2f5c..7537cda5405 100644 --- a/drivers/acpi/events/evgpeblk.c +++ b/drivers/acpi/events/evgpeblk.c @@ -309,17 +309,17 @@ acpi_ev_save_method_info(acpi_handle obj_handle, (gpe_block->block_base_number + (gpe_block->register_count * 8)))) { /* - * Not valid for this GPE block, just ignore it - * However, it may be valid for a different GPE block, since GPE0 and GPE1 - * methods both appear under \_GPE. + * Not valid for this GPE block, just ignore it. However, it may be + * valid for a different GPE block, since GPE0 and GPE1 methods both + * appear under \_GPE. */ return_ACPI_STATUS(AE_OK); } /* - * Now we can add this information to the gpe_event_info block - * for use during dispatch of this GPE. Default type is RUNTIME, although - * this may change when the _PRW methods are executed later. + * Now we can add this information to the gpe_event_info block for use + * during dispatch of this GPE. Default type is RUNTIME, although this may + * change when the _PRW methods are executed later. */ gpe_event_info = &gpe_block->event_info[gpe_number - gpe_block->block_base_number]; @@ -394,8 +394,8 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, gpe_block = gpe_info->gpe_block; /* - * The _PRW object must return a package, we are only interested - * in the first element + * The _PRW object must return a package, we are only interested in the + * first element */ obj_desc = pkg_desc->package.elements[0]; @@ -434,7 +434,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, /* * Is this GPE within this block? * - * TRUE iff these conditions are true: + * TRUE if and only if these conditions are true: * 1) The GPE devices match. * 2) The GPE index(number) is within the range of the Gpe Block * associated with the GPE device. @@ -457,6 +457,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, if (ACPI_FAILURE(status)) { goto cleanup; } + status = acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_DISABLE); @@ -476,9 +477,9 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, * RETURN: A GPE interrupt block * * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt - * block per unique interrupt level used for GPEs. - * Should be called only when the GPE lists are semaphore locked - * and not subject to change. + * block per unique interrupt level used for GPEs. Should be + * called only when the GPE lists are semaphore locked and not + * subject to change. * ******************************************************************************/ @@ -608,8 +609,9 @@ acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt) * * FUNCTION: acpi_ev_install_gpe_block * - * PARAMETERS: gpe_block - New GPE block - * interrupt_number - Xrupt to be associated with this GPE block + * PARAMETERS: gpe_block - New GPE block + * interrupt_number - Xrupt to be associated with this + * GPE block * * RETURN: Status * @@ -666,7 +668,7 @@ acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, * * FUNCTION: acpi_ev_delete_gpe_block * - * PARAMETERS: gpe_block - Existing GPE block + * PARAMETERS: gpe_block - Existing GPE block * * RETURN: Status * @@ -786,9 +788,9 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block) /* * Initialize the GPE Register and Event structures. A goal of these - * tables is to hide the fact that there are two separate GPE register sets - * in a given GPE hardware block, the status registers occupy the first half, - * and the enable registers occupy the second half. + * tables is to hide the fact that there are two separate GPE register + * sets in a given GPE hardware block, the status registers occupy the + * first half, and the enable registers occupy the second half. */ this_register = gpe_register_info; this_event = gpe_event_info; diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c index 82c457fa5a1..dbac5b3248a 100644 --- a/drivers/acpi/events/evmisc.c +++ b/drivers/acpi/events/evmisc.c @@ -148,7 +148,9 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, break; default: + /* All other types are not supported */ + return (AE_TYPE); } } @@ -189,9 +191,8 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, acpi_ut_delete_generic_state(notify_info); } } else { - /* - * There is no notify handler (per-device or system) for this device. - */ + /* There is no notify handler (per-device or system) for this device */ + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No notify handler for Notify (%4.4s, %X) node %p\n", acpi_ut_get_node_name(node), notify_value, @@ -225,9 +226,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) ACPI_FUNCTION_ENTRY(); /* - * We will invoke a global notify handler if installed. - * This is done _before_ we invoke the per-device handler attached - * to the device. + * We will invoke a global notify handler if installed. This is done + * _before_ we invoke the per-device handler attached to the device. */ if (notify_info->notify.value <= ACPI_MAX_SYS_NOTIFY) { @@ -339,11 +339,10 @@ acpi_status acpi_ev_init_global_lock_handler(void) NULL); /* - * If the global lock does not exist on this platform, the attempt - * to enable GBL_STATUS will fail (the GBL_ENABLE bit will not stick) - * Map to AE_OK, but mark global lock as not present. - * Any attempt to actually use the global lock will be flagged - * with an error. + * If the global lock does not exist on this platform, the attempt to + * enable GBL_STATUS will fail (the GBL_ENABLE bit will not stick). + * Map to AE_OK, but mark global lock as not present. Any attempt to + * actually use the global lock will be flagged with an error. */ if (status == AE_NO_HARDWARE_RESPONSE) { ACPI_ERROR((AE_INFO, @@ -452,8 +451,8 @@ acpi_status acpi_ev_acquire_global_lock(u16 timeout) } /* - * Make sure that a global lock actually exists. If not, just treat - * the lock as a standard mutex. + * Make sure that a global lock actually exists. If not, just treat the + * lock as a standard mutex. */ if (!acpi_gbl_global_lock_present) { acpi_gbl_global_lock_acquired = TRUE; @@ -572,8 +571,8 @@ void acpi_ev_terminate(void) if (acpi_gbl_events_initialized) { /* - * Disable all event-related functionality. - * In all cases, on error, print a message but obviously we don't abort. + * Disable all event-related functionality. In all cases, on error, + * print a message but obviously we don't abort. */ /* Disable all fixed events */ diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c index 236fbd1ca43..3ddddbfa8db 100644 --- a/drivers/acpi/events/evregion.c +++ b/drivers/acpi/events/evregion.c @@ -48,16 +48,8 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evregion") -#define ACPI_NUM_DEFAULT_SPACES 4 -static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = { - ACPI_ADR_SPACE_SYSTEM_MEMORY, - ACPI_ADR_SPACE_SYSTEM_IO, - ACPI_ADR_SPACE_PCI_CONFIG, - ACPI_ADR_SPACE_DATA_TABLE -}; /* Local prototypes */ - static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, u32 level, void *context, void **return_value); @@ -66,6 +58,17 @@ static acpi_status acpi_ev_install_handler(acpi_handle obj_handle, u32 level, void *context, void **return_value); +/* These are the address spaces that will get default handlers */ + +#define ACPI_NUM_DEFAULT_SPACES 4 + +static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = { + ACPI_ADR_SPACE_SYSTEM_MEMORY, + ACPI_ADR_SPACE_SYSTEM_IO, + ACPI_ADR_SPACE_PCI_CONFIG, + ACPI_ADR_SPACE_DATA_TABLE +}; + /******************************************************************************* * * FUNCTION: acpi_ev_install_region_handlers @@ -91,18 +94,19 @@ acpi_status acpi_ev_install_region_handlers(void) } /* - * All address spaces (PCI Config, EC, SMBus) are scope dependent - * and registration must occur for a specific device. + * All address spaces (PCI Config, EC, SMBus) are scope dependent and + * registration must occur for a specific device. * - * In the case of the system memory and IO address spaces there is currently - * no device associated with the address space. For these we use the root. + * In the case of the system memory and IO address spaces there is + * currently no device associated with the address space. For these we + * use the root. * - * We install the default PCI config space handler at the root so - * that this space is immediately available even though the we have - * not enumerated all the PCI Root Buses yet. This is to conform - * to the ACPI specification which states that the PCI config - * space must be always available -- even though we are nowhere - * near ready to find the PCI root buses at this point. + * We install the default PCI config space handler at the root so that + * this space is immediately available even though the we have not + * enumerated all the PCI Root Buses yet. This is to conform to the ACPI + * specification which states that the PCI config space must be always + * available -- even though we are nowhere near ready to find the PCI root + * buses at this point. * * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler * has already been installed (via acpi_install_address_space_handler). @@ -160,12 +164,11 @@ acpi_status acpi_ev_initialize_op_regions(void) return_ACPI_STATUS(status); } - /* - * Run the _REG methods for op_regions in each default address space - */ - for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { + /* Run the _REG methods for op_regions in each default address space */ - /* TBD: Make sure handler is the DEFAULT handler, otherwise + for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { + /* + * TBD: Make sure handler is the DEFAULT handler, otherwise * _REG will have already been run. */ status = acpi_ev_execute_reg_methods(acpi_gbl_root_node, @@ -318,13 +321,13 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, } /* - * It may be the case that the region has never been initialized + * It may be the case that the region has never been initialized. * Some types of regions require special init code */ if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { - /* - * This region has not been initialized yet, do it - */ + + /* This region has not been initialized yet, do it */ + region_setup = handler_desc->address_space.setup; if (!region_setup) { @@ -339,9 +342,9 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, } /* - * We must exit the interpreter because the region - * setup will potentially execute control methods - * (e.g., _REG method for this region) + * We must exit the interpreter because the region setup will + * potentially execute control methods (for example, the _REG method + * for this region) */ acpi_ex_exit_interpreter(); @@ -364,9 +367,8 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, return_ACPI_STATUS(status); } - /* - * Region initialization may have been completed by region_setup - */ + /* Region initialization may have been completed by region_setup */ + if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE; @@ -521,8 +523,8 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj, } /* - * If the region has been activated, call the setup handler - * with the deactivate notification + * If the region has been activated, call the setup handler with + * the deactivate notification */ if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) { region_setup = handler_obj->address_space.setup; @@ -668,8 +670,8 @@ acpi_ev_install_handler(acpi_handle obj_handle, } /* - * We only care about regions.and objects - * that are allowed to have address space handlers + * We only care about regions and objects that are allowed to have + * address space handlers */ if ((node->type != ACPI_TYPE_DEVICE) && (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { @@ -710,9 +712,9 @@ acpi_ev_install_handler(acpi_handle obj_handle, /* * Since the object we found it on was a device, then it * means that someone has already installed a handler for - * the branch of the namespace from this device on. Just + * the branch of the namespace from this device on. Just * bail out telling the walk routine to not traverse this - * branch. This preserves the scoping rule for handlers. + * branch. This preserves the scoping rule for handlers. */ return (AE_CTRL_DEPTH); } @@ -723,9 +725,8 @@ acpi_ev_install_handler(acpi_handle obj_handle, } /* - * As long as the device didn't have a handler for this - * space we don't care about it. We just ignore it and - * proceed. + * As long as the device didn't have a handler for this space we + * don't care about it. We just ignore it and proceed. */ return (AE_OK); } @@ -733,16 +734,14 @@ acpi_ev_install_handler(acpi_handle obj_handle, /* Object is a Region */ if (obj_desc->region.space_id != handler_obj->address_space.space_id) { - /* - * This region is for a different address space - * -- just ignore it - */ + + /* This region is for a different address space, just ignore it */ + return (AE_OK); } /* - * Now we have a region and it is for the handler's address - * space type. + * Now we have a region and it is for the handler's address space type. * * First disconnect region for any previous handler (if any) */ @@ -786,9 +785,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node, ACPI_FUNCTION_TRACE(ev_install_space_handler); /* - * This registration is valid for only the types below - * and the root. This is where the default handlers - * get placed. + * This registration is valid for only the types below and the root. This + * is where the default handlers get placed. */ if ((node->type != ACPI_TYPE_DEVICE) && (node->type != ACPI_TYPE_PROCESSOR) && @@ -848,8 +846,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node, obj_desc = acpi_ns_get_attached_object(node); if (obj_desc) { /* - * The attached device object already exists. - * Make sure the handler is not already installed. + * The attached device object already exists. Make sure the handler + * is not already installed. */ handler_obj = obj_desc->device.handler; @@ -864,8 +862,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node, handler) { /* * It is (relatively) OK to attempt to install the SAME - * handler twice. This can easily happen - * with PCI_Config space. + * handler twice. This can easily happen with the + * PCI_Config space. */ status = AE_SAME_HANDLER; goto unlock_and_exit; @@ -925,9 +923,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node, /* * Install the handler * - * At this point there is no existing handler. - * Just allocate the object for the handler and link it - * into the list. + * At this point there is no existing handler. Just allocate the object + * for the handler and link it into the list. */ handler_obj = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER); @@ -1000,11 +997,10 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, ACPI_FUNCTION_TRACE(ev_execute_reg_methods); /* - * Run all _REG methods for all Operation Regions for this - * space ID. This is a separate walk in order to handle any - * interdependencies between regions and _REG methods. (i.e. handlers - * must be installed for all regions of this Space ID before we - * can run any _REG methods) + * Run all _REG methods for all Operation Regions for this space ID. This + * is a separate walk in order to handle any interdependencies between + * regions and _REG methods. (i.e. handlers must be installed for all + * regions of this Space ID before we can run any _REG methods) */ status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run, @@ -1042,8 +1038,8 @@ acpi_ev_reg_run(acpi_handle obj_handle, } /* - * We only care about regions.and objects - * that are allowed to have address space handlers + * We only care about regions.and objects that are allowed to have address + * space handlers */ if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { return (AE_OK); @@ -1062,10 +1058,9 @@ acpi_ev_reg_run(acpi_handle obj_handle, /* Object is a Region */ if (obj_desc->region.space_id != space_id) { - /* - * This region is for a different address space - * -- just ignore it - */ + + /* This region is for a different address space, just ignore it */ + return (AE_OK); } diff --git a/drivers/acpi/events/evrgnini.c b/drivers/acpi/events/evrgnini.c index 6b94b38df07..f9e561ee9a7 100644 --- a/drivers/acpi/events/evrgnini.c +++ b/drivers/acpi/events/evrgnini.c @@ -233,9 +233,9 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, if (ACPI_FAILURE(status)) { if (status == AE_SAME_HANDLER) { /* - * It is OK if the handler is already installed on the root - * bridge. Still need to return a context object for the - * new PCI_Config operation region, however. + * It is OK if the handler is already installed on the + * root bridge. Still need to return a context object + * for the new PCI_Config operation region, however. */ status = AE_OK; } else { @@ -272,8 +272,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, } /* - * For PCI_Config space access, we need the segment, bus, - * device and function numbers. Acquire them here. + * For PCI_Config space access, we need the segment, bus, device and + * function numbers. Acquire them here. * * Find the parent device object. (This allows the operation region to be * within a subscope under the device, such as a control method.) @@ -289,16 +289,16 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, } /* - * Get the PCI device and function numbers from the _ADR object - * contained in the parent's scope. + * Get the PCI device and function numbers from the _ADR object contained + * in the parent's scope. */ status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, pci_device_node, &pci_value); /* - * The default is zero, and since the allocation above zeroed - * the data, just do nothing on failure. + * The default is zero, and since the allocation above zeroed the data, + * just do nothing on failure. */ if (ACPI_SUCCESS(status)) { pci_id->device = ACPI_HIWORD(ACPI_LODWORD(pci_value)); @@ -382,9 +382,8 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node) struct acpi_compatible_id_list *cid; u32 i; - /* - * Get the _HID and check for a PCI Root Bridge - */ + /* Get the _HID and check for a PCI Root Bridge */ + status = acpi_ut_execute_HID(node, &hid); if (ACPI_FAILURE(status)) { return (FALSE); @@ -394,10 +393,8 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node) return (TRUE); } - /* - * The _HID did not match. - * Get the _CID and check for a PCI Root Bridge - */ + /* The _HID did not match. Get the _CID and check for a PCI Root Bridge */ + status = acpi_ut_execute_CID(node, &cid); if (ACPI_FAILURE(status)) { return (FALSE); @@ -516,9 +513,9 @@ acpi_ev_default_region_setup(acpi_handle handle, * Get the appropriate address space handler for a newly * created region. * - * This also performs address space specific initialization. For + * This also performs address space specific initialization. For * example, PCI regions must have an _ADR object that contains - * a PCI address in the scope of the definition. This address is + * a PCI address in the scope of the definition. This address is * required to perform an access to PCI config space. * * MUTEX: Interpreter should be unlocked, because we may run the _REG @@ -572,7 +569,7 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj, if (ACPI_SUCCESS(status)) { /* * The _REG method is optional and there can be only one per region - * definition. This will be executed when the handler is attached + * definition. This will be executed when the handler is attached * or removed */ region_obj2->extra.method_REG = method_node; @@ -670,10 +667,8 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj, } } - /* - * This node does not have the handler we need; - * Pop up one level - */ + /* This node does not have the handler we need; Pop up one level */ + node = acpi_ns_get_parent_node(node); } diff --git a/drivers/acpi/events/evsci.c b/drivers/acpi/events/evsci.c index 2a8b7787761..b5fc8055a47 100644 --- a/drivers/acpi/events/evsci.c +++ b/drivers/acpi/events/evsci.c @@ -115,10 +115,8 @@ u32 ACPI_SYSTEM_XFACE acpi_ev_gpe_xrupt_handler(void *context) * if this interrupt handler is installed, ACPI is enabled. */ - /* - * GPEs: - * Check for and dispatch any GPEs that have occurred - */ + /* GPEs: Check for and dispatch any GPEs that have occurred */ + interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list); return_UINT32(interrupt_handled); @@ -158,11 +156,11 @@ u32 acpi_ev_install_sci_handler(void) * RETURN: E_OK if handler uninstalled OK, E_ERROR if handler was not * installed to begin with * - * DESCRIPTION: Remove the SCI interrupt handler. No further SCIs will be + * DESCRIPTION: Remove the SCI interrupt handler. No further SCIs will be * taken. * * Note: It doesn't seem important to disable all events or set the event - * enable registers to their original values. The OS should disable + * enable registers to their original values. The OS should disable * the SCI interrupt level when the handler is removed, so no more * events will come in. * diff --git a/drivers/acpi/events/evxface.c b/drivers/acpi/events/evxface.c index 94a6efe020b..a2867875c74 100644 --- a/drivers/acpi/events/evxface.c +++ b/drivers/acpi/events/evxface.c @@ -267,7 +267,7 @@ acpi_install_notify_handler(acpi_handle device, /* * Root Object: * Registering a notify handler on the root object indicates that the - * caller wishes to receive notifications for all objects. Note that + * caller wishes to receive notifications for all objects. Note that * only one global handler can be regsitered (per notify type). */ if (device == ACPI_ROOT_OBJECT) { diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 41554f736b6..669b8ca4984 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -161,8 +161,8 @@ acpi_status acpi_enable_event(u32 event, u32 flags) } /* - * Enable the requested fixed event (by writing a one to the - * enable register bit) + * Enable the requested fixed event (by writing a one to the enable + * register bit) */ status = acpi_set_register(acpi_gbl_fixed_event_info[event]. @@ -343,8 +343,8 @@ acpi_status acpi_disable_event(u32 event, u32 flags) } /* - * Disable the requested fixed event (by writing a zero to the - * enable register bit) + * Disable the requested fixed event (by writing a zero to the enable + * register bit) */ status = acpi_set_register(acpi_gbl_fixed_event_info[event]. @@ -396,8 +396,8 @@ acpi_status acpi_clear_event(u32 event) } /* - * Clear the requested fixed event (By writing a one to the - * status register bit) + * Clear the requested fixed event (By writing a one to the status + * register bit) */ status = acpi_set_register(acpi_gbl_fixed_event_info[event].