From: Michael Buesch <mb@bu3sch.de>
Date: Fri, 4 Jul 2008 21:44:37 +0000 (+0200)
Subject: ssb-pcicore: Fix IRQ-vector init on embedded devices
X-Git-Tag: v2.6.26~25^2~18
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=9e095a687b3561972272063260e14ab1bc21de08;p=linux-2.6-omap-h63xx.git

ssb-pcicore: Fix IRQ-vector init on embedded devices

On embedded devices we must not route the interrupts through
the PCI core, if our host-bus is not PCI.

Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index d28c5386809..538c570df33 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -537,6 +537,13 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
 	int err = 0;
 	u32 tmp;
 
+	if (dev->bus->bustype != SSB_BUSTYPE_PCI) {
+		/* This SSB device is not on a PCI host-bus. So the IRQs are
+		 * not routed through the PCI core.
+		 * So we must not enable routing through the PCI core. */
+		goto out;
+	}
+
 	if (!pdev)
 		goto out;
 	bus = pdev->bus;