From: Benjamin Herrenschmidt Date: Thu, 18 Dec 2008 19:13:54 +0000 (+0000) Subject: powerpc/44x: 44x TLB doesn't need "Guarded" set for all pages X-Git-Tag: v2.6.29-rc1~574^2~28 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=9dce3ce5c55c848f00429005a46fd6246cfabfbe;p=linux-2.6-omap-h63xx.git powerpc/44x: 44x TLB doesn't need "Guarded" set for all pages After discussing with chip designers, it appears that it's not necessary to set G everywhere on 440 cores. The various core errata related to prefetch should be sorted out by firmware by disabling icache prefetching in CCR0. We add the workaround to the kernel however just in case oooold firmwares don't do it. This is valid for -all- 4xx core variants. Later ones hard wire the absence of prefetch but it doesn't harm to clear the bits in CCR0 (they should already be cleared anyway). We still leave G=1 on the linear mapping for now, we need to stop over-mapping RAM to be able to remove it. Signed-off-by: Benjamin Herrenschmidt Acked-by: Kumar Gala Acked-by: Josh Boyer Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 26237357a88..bd4fe9e7278 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -68,6 +68,17 @@ _ENTRY(_start); mr r27,r7 li r24,0 /* CPU number */ +/* + * In case the firmware didn't do it, we apply some workarounds + * that are good for all 440 core variants here + */ + mfspr r3,SPRN_CCR0 + rlwinm r3,r3,0,0,27 /* disable icache prefetch */ + isync + mtspr SPRN_CCR0,r3 + isync + sync + /* * Set up the initial MMU state * @@ -570,7 +581,6 @@ finish_tlb_load: rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */ and r11,r12,r10 /* Mask PTE bits to keep */ andi. r10,r12,_PAGE_USER /* User page ? */ - ori r11,r11,_PAGE_GUARDED /* 440 errata, needs G set */ beq 1f /* nope, leave U bits empty */ rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */ 1: tlbwe r11,r13,PPC44x_TLB_ATTRIB /* Write ATTRIB */