From: Andrew Patterson <andrew.patterson@hp.com>
Date: Mon, 5 Jan 2009 23:21:04 +0000 (-0700)
Subject: PCI: Use msleep instead of cpu_relax during ASPM link retraining
X-Git-Tag: v2.6.29-rc1~181^2~10
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=987a4c783a8bbf3baf554e6b8ff588b26e06e020;p=linux-2.6-omap-h63xx.git

PCI: Use msleep instead of cpu_relax during ASPM link retraining

The cpu_relax() function can be a noop on certain architectures like
IA-64 when CPU threads are disabled, so use msleep instead during link
retraining busy/wait loop.

Introduce define LINK_RETRAIN_TIMEOUT instead of hard-coding timeout in
pcie_aspm_configure_common_clock.

Use time_after() to avoid jiffy wraparound when checking for expired
timeout.

After timeout expires, recheck link status register link training bit
instead of checking for expired timeout to avoid possible false
positive.

Note that Matthew Wilcox came up with the first rough version of this
patch.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 4d8e2c7b2ad..586b6f75910 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
+#include <linux/delay.h>
 #include <linux/pci-aspm.h>
 #include "../pci.h"
 
@@ -75,6 +76,8 @@ static const char *policy_str[] = {
 	[POLICY_POWERSAVE] = "powersave"
 };
 
+#define LINK_RETRAIN_TIMEOUT HZ
+
 static int policy_to_aspm_state(struct pci_dev *pdev)
 {
 	struct pcie_link_state *link_state = pdev->link_state;
@@ -238,16 +241,18 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
 	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
 
 	/* Wait for link training end */
-	/* break out after waiting for 1 second */
+	/* break out after waiting for timeout */
 	start_jiffies = jiffies;
-	while ((jiffies - start_jiffies) < HZ) {
+	for (;;) {
 		pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
 		if (!(reg16 & PCI_EXP_LNKSTA_LT))
 			break;
-		cpu_relax();
+		if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT))
+			break;
+		msleep(1);
 	}
 	/* training failed -> recover */
-	if ((jiffies - start_jiffies) >= HZ) {
+	if (reg16 & PCI_EXP_LNKSTA_LT) {
 		dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
 			    " common clock\n");
 		i = 0;