From: Christoph Hellwig Date: Sat, 18 Jun 2005 23:27:56 +0000 (+0200) Subject: [PATCH] orinoco: scanning support X-Git-Tag: v2.6.13-rc1~51^2~40^2~24^2~3 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=95dd91fbd8d3c788ef93bc94b4b600889e04dba1;p=linux-2.6-omap-h63xx.git [PATCH] orinoco: scanning support Patch from Pavel Roskin --- diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index c057b7f9a02..38fd8623a44 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -514,6 +514,10 @@ MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer /* Internal constants */ /********************************************************************/ +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + #define ORINOCO_MIN_MTU 256 #define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD) @@ -579,25 +583,42 @@ static struct { /* Data types */ /********************************************************************/ -struct header_struct { - /* 802.3 */ - u8 dest[ETH_ALEN]; - u8 src[ETH_ALEN]; - u16 len; - /* 802.2 */ +/* Used in Event handling. + * We avoid nested structres as they break on ARM -- Moustafa */ +struct hermes_tx_descriptor_802_11 { + /* hermes_tx_descriptor */ + u16 status; + u16 reserved1; + u16 reserved2; + u32 sw_support; + u8 retry_count; + u8 tx_rate; + u16 tx_control; + + /* ieee802_11_hdr */ + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; + u16 data_len; + + /* ethhdr */ + unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ + unsigned char h_source[ETH_ALEN]; /* source ether addr */ + unsigned short h_proto; /* packet type ID field */ + + /* p8022_hdr */ u8 dsap; u8 ssap; u8 ctrl; - /* SNAP */ u8 oui[3]; + u16 ethertype; } __attribute__ ((packed)); -/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ -u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; - -#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) - struct hermes_rx_descriptor { u16 status; u32 time; @@ -958,26 +979,55 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; u16 fid = hermes_read_regn(hw, TXCOMPLFID); - struct hermes_tx_descriptor desc; + struct hermes_tx_descriptor_802_11 hdr; int err = 0; if (fid == DUMMY_FID) return; /* Nothing's really happened */ - err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0); + /* Read the frame header */ + err = hermes_bap_pread(hw, IRQ_BAP, &hdr, + sizeof(struct hermes_tx_descriptor) + + sizeof(struct ieee80211_hdr), + fid, 0); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); + stats->tx_errors++; + if (err) { printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " "(FID=%04X error %d)\n", dev->name, fid, err); - } else { - DEBUG(1, "%s: Tx error, status %d\n", - dev->name, le16_to_cpu(desc.status)); + return; } - stats->tx_errors++; + DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, + err, fid); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + hdr.status = le16_to_cpu(hdr.status); + if (hdr.status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. + * We use the 802.11 header because the frame may + * not be 802.3 or may be mangled... + * In Ad-Hoc mode, it will be the node address. + * In managed mode, it will be most likely the AP addr + * User space will figure out how to convert it to + * whatever it needs (IP address or else). + * - Jean II */ + memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } netif_wake_queue(dev); - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); } static void orinoco_tx_timeout(struct net_device *dev) @@ -1316,6 +1366,30 @@ static void orinoco_join_ap(struct net_device *dev) orinoco_unlock(priv, &flags); } +/* Send new BSSID to userspace */ +static void orinoco_send_wevents(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, wrqu.ap_addr.sa_data); + if (err != 0) + return; + + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); + orinoco_unlock(priv, &flags); +} + static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); @@ -1395,6 +1469,15 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) break; newstatus = le16_to_cpu(linkstatus.linkstatus); + /* Symbol firmware uses "out of range" to signal that + * the hostscan frame can be requested. */ + if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && + priv->firmware_type == FIRMWARE_TYPE_SYMBOL && + priv->has_hostscan && priv->scan_inprogress) { + hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); + break; + } + connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); @@ -1404,12 +1487,89 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) else if (!ignore_disconnect) netif_carrier_off(dev); - if (newstatus != priv->last_linkstatus) + if (newstatus != priv->last_linkstatus) { + priv->last_linkstatus = newstatus; print_linkstatus(dev, newstatus); + /* The info frame contains only one word which is the + * status (see hermes.h). The status is pretty boring + * in itself, that's why we export the new BSSID... + * Jean II */ + schedule_work(&priv->wevent_work); + } + } + break; + case HERMES_INQ_SCAN: + if (!priv->scan_inprogress && priv->bssid_fixed && + priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { + schedule_work(&priv->join_work); + break; + } + /* fall through */ + case HERMES_INQ_HOSTSCAN: + case HERMES_INQ_HOSTSCAN_SYMBOL: { + /* Result of a scanning. Contains information about + * cells in the vicinity - Jean II */ + union iwreq_data wrqu; + unsigned char *buf; + + /* Sanity check */ + if (len > 4096) { + printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", + dev->name, len); + break; + } + + /* We are a strict producer. If the previous scan results + * have not been consumed, we just have to drop this + * frame. We can't remove the previous results ourselves, + * that would be *very* racy... Jean II */ + if (priv->scan_result != NULL) { + printk(KERN_WARNING "%s: Previous scan results not consumed, dropping info frame.\n", dev->name); + break; + } - priv->last_linkstatus = newstatus; + /* Allocate buffer for results */ + buf = kmalloc(len, GFP_ATOMIC); + if (buf == NULL) + /* No memory, so can't printk()... */ + break; + + /* Read scan data */ + err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, + infofid, sizeof(info)); + if (err) + break; + +#ifdef ORINOCO_DEBUG + { + int i; + printk(KERN_DEBUG "Scan result [%02X", buf[0]); + for(i = 1; i < (len * 2); i++) + printk(":%02X", buf[i]); + printk("]\n"); + } +#endif /* ORINOCO_DEBUG */ + + /* Allow the clients to access the results */ + priv->scan_len = len; + priv->scan_result = buf; + + /* Send an empty event to user space. + * We don't send the received data on the event because + * it would require us to do complex transcoding, and + * we want to minimise the work done in the irq handler + * Use a request to extract the data - Jean II */ + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); } break; + case HERMES_INQ_SEC_STAT_AGERE: + /* Security status (Agere specific) */ + /* Ignore this frame for now */ + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + break; + /* fall through */ default: printk(KERN_DEBUG "%s: Unknown information frame received: " "type 0x%04x, length %d\n", dev->name, type, len); @@ -2010,6 +2170,11 @@ static void orinoco_reset(struct net_device *dev) orinoco_unlock(priv, &flags); + /* Scanning support: Cleanup of driver struct */ + kfree(priv->scan_result); + priv->scan_result = NULL; + priv->scan_inprogress = 0; + if (priv->hard_reset) { err = (*priv->hard_reset)(priv); if (err) { @@ -2248,6 +2413,7 @@ static int determine_firmware(struct net_device *dev) priv->has_mwo = (firmver >= 0x60000); priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ priv->ibss_port = 1; + priv->has_hostscan = (firmver >= 0x8000a); /* Tested with Agere firmware : * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II @@ -2293,6 +2459,8 @@ static int determine_firmware(struct net_device *dev) priv->ibss_port = 4; priv->broken_disableport = (firmver == 0x25013) || (firmver >= 0x30000 && firmver <= 0x31000); + priv->has_hostscan = (firmver >= 0x31001) || + (firmver >= 0x29057 && firmver < 0x30000); /* Tested with Intel firmware : 0x20015 => Jean II */ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ break; @@ -2312,6 +2480,7 @@ static int determine_firmware(struct net_device *dev) priv->has_ibss = (firmver >= 0x000700); /* FIXME */ priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); priv->has_pm = (firmver >= 0x000700); + priv->has_hostscan = (firmver >= 0x010301); if (firmver >= 0x000800) priv->ibss_port = 0; @@ -2539,6 +2708,7 @@ struct net_device *alloc_orinocodev(int sizeof_card, * hardware */ INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev); INIT_WORK(&priv->join_work, (void (*)(void *))orinoco_join_ap, dev); + INIT_WORK(&priv->wevent_work, (void (*)(void *))orinoco_send_wevents, dev); netif_carrier_off(dev); priv->last_linkstatus = 0xffff; @@ -2549,6 +2719,9 @@ struct net_device *alloc_orinocodev(int sizeof_card, void free_orinocodev(struct net_device *dev) { + struct orinoco_private *priv = netdev_priv(dev); + + kfree(priv->scan_result); free_netdev(dev); } @@ -3967,6 +4140,332 @@ static int orinoco_ioctl_getspy(struct net_device *dev, return 0; } +/* Trigger a scan (look for other cells in the vicinity */ +static int orinoco_ioctl_setscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + unsigned long flags; + + /* Note : you may have realised that, as this is a SET operation, + * this is priviledged and therefore a normal user can't + * perform scanning. + * This is not an error, while the device perform scanning, + * traffic doesn't flow, so it's a perfect DoS... + * Jean II */ + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Scanning with port 0 disabled would fail */ + if (!netif_running(dev)) { + err = -ENETDOWN; + goto out; + } + + /* In monitor mode, the scan results are always empty. + * Probe responses are passed to the driver as received + * frames and could be processed in software. */ + if (priv->iw_mode == IW_MODE_MONITOR) { + err = -EOPNOTSUPP; + goto out; + } + + /* Note : because we don't lock out the irq handler, the way + * we access scan variables in priv is critical. + * o scan_inprogress : not touched by irq handler + * o scan_mode : not touched by irq handler + * o scan_result : irq is strict producer, non-irq is strict + * consumer. + * o scan_len : synchronised with scan_result + * Before modifying anything on those variables, please think hard ! + * Jean II */ + + /* If there is still some left-over scan results, get rid of it */ + if (priv->scan_result != NULL) { + /* What's likely is that a client did crash or was killed + * between triggering the scan request and reading the + * results, so we need to reset everything. + * Some clients that are too slow may suffer from that... + * Jean II */ + kfree(priv->scan_result); + priv->scan_result = NULL; + } + + /* Save flags */ + priv->scan_mode = srq->flags; + + /* Always trigger scanning, even if it's in progress. + * This way, if the info frame get lost, we will recover somewhat + * gracefully - Jean II */ + + if (priv->has_hostscan) { + switch (priv->firmware_type) { + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN_SYMBOL, + HERMES_HOSTSCAN_SYMBOL_ONCE | + HERMES_HOSTSCAN_SYMBOL_BCAST); + break; + case FIRMWARE_TYPE_INTERSIL: { + u16 req[3]; + + req[0] = cpu_to_le16(0x3fff); /* All channels */ + req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ + req[2] = 0; /* Any ESSID */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN, &req); + } + break; + case FIRMWARE_TYPE_AGERE: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + 0); /* Any ESSID */ + if (err) + break; + + err = hermes_inquire(hw, HERMES_INQ_SCAN); + break; + } + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); + + /* One more client */ + if (! err) + priv->scan_inprogress = 1; + + out: + orinoco_unlock(priv, &flags); + return err; +} + +/* Translate scan data returned from the card to a card independant + * format that the Wireless Tools will understand - Jean II */ +static inline int orinoco_translate_scan(struct net_device *dev, + char *buffer, + char *scan, + int scan_len) +{ + struct orinoco_private *priv = netdev_priv(dev); + int offset; /* In the scan data */ + union hermes_scan_info *atom; + int atom_len; + u16 capabilities; + u16 channel; + struct iw_event iwe; /* Temporary buffer */ + char * current_ev = buffer; + char * end_buf = buffer + IW_SCAN_MAX_DATA; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + atom_len = sizeof(struct agere_scan_apinfo); + offset = 0; + break; + case FIRMWARE_TYPE_SYMBOL: + /* Lack of documentation necessitates this hack. + * Different firmwares have 68 or 76 byte long atoms. + * We try modulo first. If the length divides by both, + * we check what would be the channel in the second + * frame for a 68-byte atom. 76-byte atoms have 0 there. + * Valid channel cannot be 0. */ + if (scan_len % 76) + atom_len = 68; + else if (scan_len % 68) + atom_len = 76; + else if (scan_len >= 1292 && scan[68] == 0) + atom_len = 76; + else + atom_len = 68; + offset = 0; + break; + case FIRMWARE_TYPE_INTERSIL: + offset = 4; + if (priv->has_hostscan) + atom_len = scan[0] + (scan[1] << 8); + else + atom_len = offsetof(struct prism2_scan_apinfo, atim); + break; + default: + return 0; + } + + /* Check that we got an whole number of atoms */ + if ((scan_len - offset) % atom_len) { + printk(KERN_ERR "%s: Unexpected scan data length %d, " + "atom_len %d, offset %d\n", dev->name, scan_len, + atom_len, offset); + return 0; + } + + /* Read the entries one by one */ + for (; offset + atom_len <= scan_len; offset += atom_len) { + /* Get next atom */ + atom = (union hermes_scan_info *) (scan + offset); + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, atom->a.bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + /* Add the ESSID */ + iwe.u.data.length = le16_to_cpu(atom->a.essid_len); + if (iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); + + /* Add mode */ + iwe.cmd = SIOCGIWMODE; + capabilities = le16_to_cpu(atom->a.capabilities); + if (capabilities & 0x3) { + if (capabilities & 0x1) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + } + + channel = atom->s.channel; + if ( (channel >= 1) && (channel <= NUM_CHANNELS) ) { + /* Add frequency */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel_frequency[channel-1] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + } + + /* Add quality statistics */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.updated = 0x10; /* no link quality */ + iwe.u.qual.level = (__u8) le16_to_cpu(atom->a.level) - 0x95; + iwe.u.qual.noise = (__u8) le16_to_cpu(atom->a.noise) - 0x95; + /* Wireless tools prior to 27.pre22 will show link quality + * anyway, so we provide a reasonable value. */ + if (iwe.u.qual.level > iwe.u.qual.noise) + iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; + else + iwe.u.qual.qual = 0; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if (capabilities & 0x10) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); + + /* Bit rate is not available in Lucent/Agere firmwares */ + if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { + char * current_val = current_ev + IW_EV_LCP_LEN; + int i; + int step; + + if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) + step = 2; + else + step = 1; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + /* Max 10 values */ + for (i = 0; i < 10; i += step) { + /* NULL terminated */ + if (atom->p.rates[i] == 0x0) + break; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = ((atom->p.rates[i] & 0x7f) * 500000); + current_val = iwe_stream_add_value(current_ev, current_val, + end_buf, &iwe, + IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if ((current_val - current_ev) > IW_EV_LCP_LEN) + current_ev = current_val; + } + + /* The other data in the scan result are not really + * interesting, so for now drop it - Jean II */ + } + return current_ev - buffer; +} + +/* Return results of a scan */ +static int orinoco_ioctl_getscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *srq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* If no results yet, ask to try again later */ + if (priv->scan_result == NULL) { + if (priv->scan_inprogress) + /* Important note : we don't want to block the caller + * until results are ready for various reasons. + * First, managing wait queues is complex and racy. + * Second, we grab some rtnetlink lock before comming + * here (in dev_ioctl()). + * Third, we generate an Wireless Event, so the + * caller can wait itself on that - Jean II */ + err = -EAGAIN; + else + /* Client error, no scan results... + * The caller need to restart the scan. */ + err = -ENODATA; + } else { + /* We have some results to push back to user space */ + + /* Translate to WE format */ + srq->length = orinoco_translate_scan(dev, extra, + priv->scan_result, + priv->scan_len); + + /* Return flags */ + srq->flags = (__u16) priv->scan_mode; + + /* Results are here, so scan no longer in progress */ + priv->scan_inprogress = 0; + + /* In any case, Scan results will be cleaned up in the + * reset function and when exiting the driver. + * The person triggering the scanning may never come to + * pick the results, so we need to do it in those places. + * Jean II */ + +#ifdef SCAN_SINGLE_READ + /* If you enable this option, only one client (the first + * one) will be able to read the result (and only one + * time). If there is multiple concurent clients that + * want to read scan results, this behavior is not + * advisable - Jean II */ + kfree(priv->scan_result); + priv->scan_result = NULL; +#endif /* SCAN_SINGLE_READ */ + /* Here, if too much time has elapsed since last scan, + * we may want to clean up scan results... - Jean II */ + } + + orinoco_unlock(priv, &flags); + return err; +} + /* Commit handler, called after set operations */ static int orinoco_ioctl_commit(struct net_device *dev, struct iw_request_info *info, @@ -4060,6 +4559,8 @@ static const iw_handler orinoco_handler[] = { [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy, [SIOCSIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setwap, [SIOCGIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap, + [SIOCSIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setscan, + [SIOCGIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getscan, [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid, [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid, [SIOCSIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setnick, diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 329e79f6d7b..2a6b1c09b26 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -32,6 +32,20 @@ struct orinoco_key { char data[ORINOCO_MAX_KEY_SIZE]; } __attribute__ ((packed)); +struct header_struct { + /* 802.3 */ + u8 dest[ETH_ALEN]; + u8 src[ETH_ALEN]; + u16 len; + /* 802.2 */ + u8 dsap; + u8 ssap; + u8 ctrl; + /* SNAP */ + u8 oui[3]; + u16 ethertype; +} __attribute__ ((packed)); + typedef enum { FIRMWARE_TYPE_AGERE, FIRMWARE_TYPE_INTERSIL, @@ -51,6 +65,7 @@ struct orinoco_private { int open; u16 last_linkstatus; struct work_struct join_work; + struct work_struct wevent_work; /* Net device stuff */ struct net_device *ndev; @@ -77,6 +92,7 @@ struct orinoco_private { unsigned int has_pm:1; unsigned int has_preamble:1; unsigned int has_sensitivity:1; + unsigned int has_hostscan:1; unsigned int broken_disableport:1; /* Configuration paramaters */ @@ -103,6 +119,12 @@ struct orinoco_private { /* Configuration dependent variables */ int port_type, createibss; int promiscuous, mc_count; + + /* Scanning support */ + int scan_inprogress; /* Scan pending... */ + u32 scan_mode; /* Type of scan done */ + char * scan_result; /* Result of previous scan */ + int scan_len; /* Lenght of result */ }; #ifdef ORINOCO_DEBUG