From: Stephen Hemminger Date: Sat, 7 Apr 2007 23:02:28 +0000 (-0700) Subject: sky2: phy workarounds for Yukon EC-U A1 X-Git-Tag: v2.6.21-rc7~22^2~8 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=9467a8fc89844ff2ea9c6d13460dddb3b674cc37;p=linux-2.6-omap-h63xx.git sky2: phy workarounds for Yukon EC-U A1 The workaround Yukon EC-U wasn't comparing with correct version and wasn't doing correct setup. Without it, 88e8056 throws all sorts of errors. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index b636b8a55ff..4a009b7b177 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -510,9 +510,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ledover &= ~PHY_M_LED_MO_RX; } - if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) { + if (hw->chip_id == CHIP_ID_YUKON_EC_U && + hw->chip_rev == CHIP_REV_YU_EC_U_A1) { /* apply fixes in PHY AFE */ - pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255); /* increase differential signal amplitude in 10BASE-T */ @@ -524,7 +524,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, 0x17, 0x2002); /* set page register to 0 */ - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); } else if (hw->chip_id != CHIP_ID_YUKON_EX) { gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);