From: Zachary Amsden Date: Tue, 13 Feb 2007 12:26:21 +0000 (+0100) Subject: [PATCH] i386: paravirt CPU hypercall batching mode X-Git-Tag: v2.6.21-rc1~184^2~71 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=9226d125d94c7e4964dd41cc5e9ca2ff84091d01;p=linux-2.6-omap-h63xx.git [PATCH] i386: paravirt CPU hypercall batching mode The VMI ROM has a mode where hypercalls can be queued and batched. This turns out to be a significant win during context switch, but must be done at a specific point before side effects to CPU state are visible to subsequent instructions. This is similar to the MMU batching hooks already provided. The same hooks could be used by the Xen backend to implement a context switch multicall. To explain a bit more about lazy modes in the paravirt patches, basically, the idea is that only one of lazy CPU or MMU mode can be active at any given time. Lazy MMU mode is similar to this lazy CPU mode, and allows for batching of multiple PTE updates (say, inside a remap loop), but to avoid keeping some kind of state machine about when to flush cpu or mmu updates, we just allow one or the other to be active. Although there is no real reason a more comprehensive scheme could not be implemented, there is also no demonstrated need for this extra complexity. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton --- diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 7329ec9fcc9..4dfdac4550d 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -545,6 +545,7 @@ struct paravirt_ops paravirt_ops = { .apic_write_atomic = native_apic_write_atomic, .apic_read = native_apic_read, #endif + .set_lazy_mode = (void *)native_nop, .flush_tlb_user = native_flush_tlb, .flush_tlb_kernel = native_flush_tlb_global, diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 23ae198dbbc..cfae587bf7d 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -669,14 +669,6 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas */ load_TLS(next, cpu); - /* - * Restore %gs if needed (which is common) - */ - if (prev->gs | next->gs) - loadsegment(gs, next->gs); - - write_pda(pcurrent, next_p); - /* * Now maybe handle debug registers and/or IO bitmaps */ @@ -686,6 +678,15 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas disable_tsc(prev_p, next_p); + /* + * Leave lazy mode, flushing any hypercalls made here. + * This must be done before restoring TLS segments so + * the GDT and LDT are properly updated, and must be + * done before math_state_restore, so the TS bit is up + * to date. + */ + arch_leave_lazy_cpu_mode(); + /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now @@ -693,6 +694,14 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas if (next_p->fpu_counter > 5) math_state_restore(); + /* + * Restore %gs if needed (which is common) + */ + if (prev->gs | next->gs) + loadsegment(gs, next->gs); + + write_pda(pcurrent, next_p); + return prev_p; } diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 9d774d07d95..00c23433b39 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -182,6 +182,19 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres #define arch_leave_lazy_mmu_mode() do {} while (0) #endif +/* + * A facility to provide batching of the reload of page tables with the + * actual context switch code for paravirtualized guests. By convention, + * only one of the lazy modes (CPU, MMU) should be active at any given + * time, entry should never be nested, and entry and exits should always + * be paired. This is for sanity of maintaining and reasoning about the + * kernel code. + */ +#ifndef __HAVE_ARCH_ENTER_LAZY_CPU_MODE +#define arch_enter_lazy_cpu_mode() do {} while (0) +#define arch_leave_lazy_cpu_mode() do {} while (0) +#endif + /* * When walking page tables, get the address of the next boundary, * or the end address of the range if that comes earlier. Although no diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h index 53da276a2ec..38e5164bd0e 100644 --- a/include/asm-i386/paravirt.h +++ b/include/asm-i386/paravirt.h @@ -146,6 +146,8 @@ struct paravirt_ops void (fastcall *pmd_clear)(pmd_t *pmdp); #endif + void (fastcall *set_lazy_mode)(int mode); + /* These two are jmp to, not actually called. */ void (fastcall *irq_enable_sysexit)(void); void (fastcall *iret)(void); @@ -386,6 +388,19 @@ static inline void pmd_clear(pmd_t *pmdp) } #endif +/* Lazy mode for batching updates / context switch */ +#define PARAVIRT_LAZY_NONE 0 +#define PARAVIRT_LAZY_MMU 1 +#define PARAVIRT_LAZY_CPU 2 + +#define __HAVE_ARCH_ENTER_LAZY_CPU_MODE +#define arch_enter_lazy_cpu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_CPU) +#define arch_leave_lazy_cpu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_NONE) + +#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE +#define arch_enter_lazy_mmu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_MMU) +#define arch_leave_lazy_mmu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_NONE) + /* These all sit in the .parainstructions section to tell us what to patch. */ struct paravirt_patch { u8 *instr; /* original instructions */ diff --git a/kernel/sched.c b/kernel/sched.c index 08f86178aa3..0dc757246d8 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1853,6 +1853,13 @@ context_switch(struct rq *rq, struct task_struct *prev, struct mm_struct *mm = next->mm; struct mm_struct *oldmm = prev->active_mm; + /* + * For paravirt, this is coupled with an exit in switch_to to + * combine the page table reload and the switch backend into + * one hypercall. + */ + arch_enter_lazy_cpu_mode(); + if (!mm) { next->active_mm = oldmm; atomic_inc(&oldmm->mm_count);